• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.313-314
• /
• 2006

Indicating product quantity by real time can be benefit both worker and management. Worker can compare real product quantity with its target and can adjust working speed to match with goal. Therefore, so called JPH equipment developed to indicate target quantity of product. As a main processor PIC16F877 was used and FND display were used to indicate current time, elapsed time, JPH value and target amount of product. Values like JPH and starting time, etc. are can easily be set by $4{\times}4$ numeric keypad and display datum likes target amount of product, current time and elapsed time, etc are displayed on FND by RS232 serial transmit. The operation of JPH equipment are tested and verified through long term test and are proved acting properly on working conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.184-191
• /
• 2003

A parallel manipulator has high stiffness and all the joint errors on the device are not accumulated at the end -effector unlike a serial manipulator. These are the reasons why the parallel manipulator has been widely used in many fields of industry. In the parallel manipulator, it is very important to predict the exact pose of the end-effector when we want to control the end-effector motion. Installation errors have to be determined in order to predict and control the actual position and pose of the end-effector. This paper presents an algorithm to find the whole 36 joint error components with joint clearance errors and measurement errors considered, when a link length measurement sensor is used and data more than 36 times are acquired for 36 different configurations. A simulation test using this algorithm is performed with a Matlab program which uses the Levenberg-Marquardt method that is known to be efficient for non-linear optimization.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1537-1544
• /
• 2012

In this paper, a new integration of linear mapping capability with 4-20mA current loop receiver. This module allow user to change instrument variable instantly. Configurations are easy to set by using console command through serial communication port. Break in current loop or faulty current transmitter are easily detect through indicator. The implementation of the module and the test results are discussed.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.256-259
• /
• 2017

SENT (single edge nibble transmission) is a serial communication protocol between automotive sensors and ECU (electronic control unit). SENT exploits digital waveform, so it has a simple and cheap architecture without transceiver circuits. Usually it is exploited as an embedded communication interface in the sensors. In this paper, a SENT interface was designed in Verilog HDL, fully complying with SAE J2716. It was implemented in FPGA, and verified on a test board. When it was synthesized, the gate count is about 2,500 gates in 0.18um technology.

• Journal of the Korean neurological association
• /
• v.36 no.4
• /
• pp.358-362
• /
• 2018

Delayed anoxic encephalopathy after carbon monoxide (CO) poisoning is characterized by neurological deterioration that occurs after recovery from acute CO intoxication. There has been no established therapy. We report a patient recovered from acute CO intoxication developed various neurological symptoms. After the administration of high dose prednisolone and anticholinesterase inhibitor, the therapeutic effect was remarkable and confirmed by quantitative analysis of diffusion-tensor imaging (DTI). DTI could be used to evaluate the therapeutic effect for delayed anoxic encephalopathy after CO poisoning.

• International Journal of Computer Science & Network Security
• /
• v.23 no.6
• /
• pp.176-180
• /
• 2023

Aim of this study to examine the mediating role of network service between perceived quality, retailer service and customer satisfaction during COVID-19. Primary data gathered through adopted questionnaire from previous studies and 200 university students were asked to fill online questionnaire during COVID-19 situation in country. Structural Equation Modelling technique applied in order to test the proposed hypothesis generated from existing literature review. Findings revealed full mediation effect of network service for both perceived quality and retailer service on customer satisfaction during COVID-19. New insights of this study are key role of network services is identified and university students' satisfaction is measured for online classes in developing country, Pakistan. In future serial mediation is suggested for validity of existing results in developed and developing countries.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.810-813
• /
• 2008

본 논문에서 연구하고 구현된 JTAG(Joint Test Action Group) Writer는 하나의 SoC(System On a Chip)만 지원하도록 설계된 기존 제품의 단점을 보완할 수 있도록 각 SoC의 제조 회사에서 제공하는 BSDL(Boundary Scan Description Language)을 이용하여 여러 가지 SoC에 쉽게 사용할 수 있도록 모듈화 했다. 그리고 기존 제품들이 사용하고 있는 직렬 포트나 병렬 포트 대신 안정적이고 편리한 USB(Universal Serial Bus) 접속규격을 지원하도록 개선했다.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.5
• /
• pp.471-478
• /
• 2009

The present paper deals with characteristics of resistance performance according to the variation of synthetic ice thickness and hull form. The resistance test has been conducted with pack ice condition in Pusan National University towing tank. Stem angle has been chosen as main parameters for the variation of hull form characteristics, which is the most important factor especially in icebreaking cargo vessel. The serial comparisons of resistance test have been done with the variation of hull form parameter as well as with the different thickness of synthetic ice. The different trend of resistance performances with increasing of stem angle has been shown at each synthetic ice thickness. The present test results is expected to be confirmed by comparing the test results in ice tank in the near future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.101-110
• /
• 2004

Flight and Qualification Models of Single Board Computer (SBC), called On-Board Computer (OBC), for HAUSAT-l picosatellite, which is scheduled to launch on September, 2004 by Russian "Dnepr" launch vehicle, have been developed. The OBC of HAUSAT-1 has been designed with some improved features compared to other picosatellites. A multifunctional controller and up-to-date SPI (Serial Peripheral Interface) and 1-Wire interface are implemented to simplify the harness routing and to minimize the mass and size of OBC. The improved fault-tolerant architecture design methodology is incorporated in the HAUSAT-1 OBC to protect against space radiation environment. The functions of the OBC were fully tested and verified by the Electrical Test Bed (ETB) model. This paper is also addressing the environmental test results, such as random vibration and thermal vacuum tests.

• Journal of Korean Elementary Science Education
• /
• v.33 no.2
• /
• pp.352-363
• /
• 2014

The purpose of this study was to develop a proper teaching strategy to raise students' interests and creative problem-solving ability in science. And the result of applying this developed teaching strategy to elementary science lesson were compared with that of traditional science lesson. For comparison, two classes of $5^{th}$ grade in S elementary school in B city were selected. After pre-test, one class, experimental group, took a science lesson applying developed teaching strategy and other class, comparative group, took a traditional science lesson. After respective lesson, two classes did post test. The results of this study can be summarized as follows. First, IAAI(Interest-Activities-Attainment-Initiation) teaching strategy was developed. IAAI teaching strategy was composed of 4 stages which were (1)interest in science, (2)science experiment activities, (3)attainment to science knowledge, (4)initiation of creative thinking and 4 stages were progressed in serial order in science lesson. Second, after lessons, the experimental group achieved higher mark in the test of science academic achievement than the comparative group and it was statistically meaningful difference. Third, after lessons, the experimental group was more improved in science-related attitudes than the comparative group and it was statistically meaningful difference. Fourth, after the lesson, the experimental group was more improved than the comparative group in the creativity test and the difference was statistically meaningful.