• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.670-672
• /
• 2004

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2327-2332
• /
• 2011

Recently, the increase of loading amount on cargo ships due to the automation of loading process results in much complex ship operation. For this reason, NMEA-0183 based on RS-422,485 and NMEA-2000 based on CAN communication methods have been usually used as a standardized method in the marin electric interfacing equipments. In this paper, a general NMEA-0183 protocol was designed to support 7-channel NMEA-0183 serial communication data, which can receive 3-channel 16 bits ADC and 2-channel pulse using SPI(Serial Peripheral Interface). In particular, this method was designed for ship communication requires 7 important factors. Also in this study, using the minimization of the proposed method and realizing the monitoring system based on PC, the effectiveness of multichannel indicator system was proposed.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.87-95
• /
• 2003

Submarine optical fiber cable construction consists of marine survey, PLGR(Pre Lay Grapnel Run), shore-end-work, laying the submarine optical cable. This PLGR is work to ease the cable lay safely in seabed, improve the performance of Plough and ROV (Remotely-Operated Vehicle) laying work, and protect laying equipment. This paper presents the design and implementation of real-time monitoring system for PLGR work in submarine optical fiber cable construction enterprise. In this paper, we designe overall real-time monitoring system. For this purpose, the modules such as serial multiport communication module, real-time processing module, environment configuration module, real-time graph and a printout modules are designed and implemented. For the validity evaluation of this paper, serial multi port communication module, data parsing, realtime graph output are implemented and tested.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.570-578
• /
• 2017

This paper proposes a method to stabilize the output voltage of the secondary side of an Inductive Power Transfer (IPT) system through tuning/detuning via a serial tuned DC Voltage-controlled Variable Capacitor (DVVC). The equivalent capacitance of the DVVC changes with the conduction period of a diode in the DVVC controlled by DC voltage. The output voltage of an IPT system can be made constant when this DVVC is used as a variable resonant capacitor combined with a PI controller generating DC control voltage according to the fluctuations of the output voltage. Since a passive diode instead of an active switch is used in the DVVC, there are no active switch driving problems such as a separate voltage source or gate drivers, which makes the DVVC especially advantageous when used at the secondary side of an IPT system. Moreover, since the equivalent capacitance of the DVVC can be controlled smoothly with a DC voltage and the passive diode generates less EMI than active switches, the DVVC has the potential to be used at much higher frequencies than traditional switch mode capacitors.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.85-92
• /
• 2000

In this paepr, a multicode CDMA scheme with serial and parallel structure as the transmission scheme of wireless LAN which can transmit high speed data under an indoor channel environment is modeled and optimal values of several parameters needed for implementing wireless LAN modern system are derived through computer simulation. it is verified that given the transmission bandwidth and maximum data rate, the system performance is improved if increasing spreading gain anf the number of channels or decreasing the data rate of each channel. Especially the parallel structure makes not only the system performance much more improved but also the hardware implementation easier than serial structure under the same condition because the effective chip rate is decreased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.178-182
• /
• 2005

The proposed system in this paper is designed to provide users with a means of global location information using Orbcomm satellite communication and X.400 protocol. The system's two-way data transmission capabilities allow users to track mobile or fixed objects anywhere in the world via Internet. This study utilizes the X.400 protocol, and the SIP(Serial Interface Protocol) and self defined control protocol to implement data communication link in this paper. Data processor board connected to SC(Subscriber Communicator) is also designed and implemented to interface with GPS receiver. The experimental results of the proposed global position location system is evaluated through real-time experiments, and we have confirmed it works well according to the protocol designed in this paper.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.125-132
• /
• 2015

PCI Express is high-speed point-to-point serial protocol, the system is designed by analysing loss and jitter through Eye Diagram. It is necessarily analyzing high speed serial signals when the PCI Express Gen3 which has 8Gbps physical signal speed is designed especially. This paper deals with topology extraction, channel analysis, extraction of s-parameters and system signal integrity simulation within transceiver buffer models through PCI Express Gen3 server connecting switch system design. Optimal parameters of transmitter buffer equalizer are found through solution space simulation of de-emphasis and preshoot parameters to compensate channel loss.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1396-1401
• /
• 2004

In recent years, robot has been used widely in industrial field and has been expanded as a result of continous research and development for high-speed and miniaturization. The goal of this paper is to design the special serial manipulator through the understanding of the structure, mobility, and analysis of serial manipulator. Thereafter we control the position and orientation of end-effector with respect to time. In general, a structure of industrial robot consists of several links connected in series by various types of joints. Typically revolute and prismatic joints. The movement of these joints is determined in inverse kinematic analysis. Compared to the complicated structure of parallel and hybrid robot, open loop system retains the characteristic that each link is independent and is controlled easily by AC servomotor that is used to place the robot end-effector toward the accurate point with the desired speed and power while it is operated by position control algorithm. The robot end-effector should trace the given trajectory within the appropriate time. The trajectory of 3D end-effector model made by OpenGL can be displayed on the monitor program simultaneously

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.3
• /
• pp.121-129
• /
• 2010

For the development of software industry, offers an expanded software authentication scheme caused by the unauthorized copying of software is to reduce the damage to software developers, retail sales and to promote the development of the software industry was studied. Serial Number of the current software registration is conducted in such a simple verification procedure if the Serial Number only illegal and can be installed on multiple computers, such as program code to allow third parties to enter the Serial Number, or the extract can be used without is a reality. The proposed extension to the software authentication system when you install the software, my phone authentication and MAC Address Authentication Service introduced to distinguish normal user, the user of the MAC Address of the server and software development company that was sent to the registered MAC Address of the computer to be run only by the use of genuine software and to make unauthorized copies of software generated by the software developer can reduce the damage of the proposed plan.

• The KIPS Transactions:PartA
• /
• v.17A no.3
• /
• pp.153-158
• /
• 2010

Most of software developers use the GNU Debugger (GDB) in order to debug code execution. The GDB supports a remote debugging environment through serial communication. However, in embedded systems, the speed is limited in the serial communication. Due to this reason, the serial communication is rarely used for the debugging purpose. To solve this problem, many embedded systems adapt the JTAG and the USB interface. This paper proposes debugging environment via USB-JTAG interface to debug the EISC processor, and introduces how the USB interface works on the GDB and how the JTAG module handles debugging packets.