• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1541_1542
• /
• 2009

본 논문에서는 바이오/환경센서 응용을 위해 실리콘 기판위에 나노 동공구조 백금 전극을 작동전극으로 갖는 소형화된 용존산소센서를 설계 및 제작하고 그 특성을 분석하였다. 제작된 용존산소 센서는 15 mm $\times$ 8 mm $\times$ 0.6 mm의 소형화된 크기를 가졌으며, -0.9 V의 인가전위 시에 각각 산소 포화 상태와 무산소 상태에서 2.14 mA와 0.8 mA의 환원전류 특성을 보였다. 또한, 다양한 산소 농도상태에서 각기 다른 전류응답 차이를 보였다. 이를 통해서 다양한 산소농도에 대한 센싱특성을 검증하였다. 한편, 제작된 용존산소 센서는 전극제작에 사용된 나노 동공구조 백금 전극의 높은 촉매 특성에 기인하여 90% 전류응답시간이 7초 이내로 기발표된 다른 연구들에 비해 현저히 향상된 응답특성을 보였다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.10a
• /
• pp.39-45
• /
• 2000

A small camera module fabricated by including bare chip bonding methods is utilized to realize advanced mobile devices. One of the driving forces is the TOG (Tape On Glass) bonding method which reduces the packaging size of the image sensor clip. The TOG module is a new thinner and smaller image sensor module, using flip chip interconnection method with the ACP (Anisotropic Conductive Paste). The TOG production process was established by determining the optimum bonding conditions for both optical glass bonding and image sensor clip bonding lo the flexible PCB. The bonding conditions, including sufficient bonding margins, were studied. Another bonding method is the flip chip bonding method for DSP (Digital Signal Processor) chip. A new AC\ulcorner was developed to enable the short resin curing time of 10 sec. The bonding mechanism of the resin curing method was evaluated using FEM analysis. By using these flip chip bonding techniques, small camera module was realized.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.4
• /
• pp.35-39
• /
• 2013

A four point bending apparatus has been developed to measure semiconductor sensor piezoresistance inside a four inch probe station. The apparatus has a footprint of $60{\times}83mm^2$ and can apply $10{\mu}m$ displacements using a vertical micrometer stage. We used finite element analysis to predict and improve the accuracy of the instrument. Finally strain gauge attached on a silicon test piece was used to experimentally verify the setup.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.1
• /
• pp.19-26
• /
• 2007

This study was focused on the feasibility of ultrasonic bonding of Au flip chip bumps for a practical complementary metal oxide semiconductor (CMOS) image sensor with electroplated Au substrate. The ultrasonic bonding was carried out with different bonding pressures and times after the atmospheric pressure plasma cleaning, and then the die shear test was performed to optimize the ultrasonic bonding parameters. The bonding pressure and time strongly affected the bonding strength of the bumps. The Au flip chip bumps were successfully bonded with the electroplated Au substrate at room temperature, and the bonding strength reached approximate 73 MPa under the optimum conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1297-1305
• /
• 2004

Reliability of MEMS devices is receiving more attention as they are heading towards commercial production. In particular are the reliability and long-term stability of wafer level vacuum packaged MEMS gyroscope sensors subjected to cyclic mechanical stresses at high frequencies. In this study, we carried out several reliability tests such as environmental storage, fatigue, shock, and vibration, and we investigated the failure mechanisms of the anodically bonded vacuum gyroscope sensors. It was found that successful vacuum packaging could be achieved through reducing outgassing inside the cavity by deposition of titanium as well as by pre-taking process. The current gyroscope structure is found to be safe from fatigue failure for 1000 hours of operation test. The gyroscope sensor survives the drop and vibration tests without any damage, indicating robustness of the sensor. The reliability test results presented in this study demonstrate that MEMS gyroscope sensor is very close to commercialization.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.1-10
• /
• 2020

The technology and market size of image sensors continue to develop thanks to the release of image sensors that exceed 100 million pixels in 2019 and expansion of black box camera markets for vehicles in addition to existing mobile applications. We review the technology flow of image sensors that have been constantly evolving for 40 years since Hitachi launched a 200,000-pixel image sensor in 1979. Although CCD has made inroads into image sensor market for a while based on good picture quality, CMOS image sensor (CIS) with active pixels has made inroads into the market as semiconductor technology continues to develop, since the electrons generated by the incident light are converted to the electric signals in the pixel, and the power consumption is low. CIS image sensors with superior characteristics such as high resolution, high sensitivity, low power consumption, low noise and vivid color continue to be released as the new technologies are incorporated. At present, new types of structures such as Backside Illumination and Isolation Cell have been adopted, with better sensitivity and high S/N ratio. In the future, new photoconductive materials are expected to be adopted as a light absorption part in place of the pn junction.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.1-12
• /
• 2022

With the rapid development of artificial intelligence technology that gives existing sensors functions similar to human intelligence is drawing attention. Previously, researches were mainly focused on an improvement of fundamental performance indicators as sensors. However, recently, attempts to combine artificial intelligence such as classification and prediction with sensors have been explored. Based on this, intelligent sensor research has been actively reported in almost all kinds of sensing fields such as disease detection, motion detection, and gas sensor. In this paper, we introduce the basic concepts, types, and driving mechanisms of artificial intelligence and review some examples of its use.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.51-55
• /
• 2021

The nurses manually carry out the intravenous therapy for the patients. Using an Arduino, the fine flow controlling device was invented to provide an ongoing patient care. The medication is injected through a peristaltic pump, and the amount of the solution is controlled with a RGB color sensor. The power of the device is supplied through the batteries. An amount of the injection is measured with LIG strain sensor fabricated by 355nm UV pulsed laser. This system will provide a better medical service.

• Journal of Sensor Science and Technology
• /
• v.24 no.5
• /
• pp.287-290
• /
• 2015

Liquid crystal polymer (LCP) is a thermoplastic polymer with superior mechanical and thermal properties. In addition, its characteristics include very low water absorption rate and possibility to apply bonding process under low temperature. In this study, LCP is utilized as a packaging material for a microelectronic system (MEMS) based safety device with suggestion of a low temperature packaging process. Highly sensitive and stable capacitive type humidity sensor is fabricated to investigate hermeticity of the packaged MEMS device.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.1
• /
• pp.81-89
• /
• 1999

The fabrication process for miniaturizing the Electronic Article Surveillance (EAS) sensor was studied using micromachining technique. Two types of sensor structure, free standing membrane type and diving beard type, were proposed and researched for establishing the fabrication process. The membrane type structure was easy to change the sensor shape but had the limitation for miniaturizing, because the size of the sensor depends on the silicon substrate thickness. The diving board type structure has the advantage of miniaturization and of free motion. Since the elastic modulus is not trio high, SiN film is expected to be adequate for the supporting membrane of magnetic sensor. The selectivity of $H_2O_2$for sputtered W with respect to Fe-B-Si, which was studded for magnetic sensor materials, was high enough to be removed after using as a protection layer. Therefore, the diving board type process using the silicon nitride film for the supporter of the sensor material and the sputtered W for protection layer is expected to be useful fur miniaturizing the Electronic Article Surveillance (EAS) sensor.