• International Journal of Computer Science & Network Security
• /
• 제22권9호
• /
• pp.389-395
• /
• 2022

A Mobile Sensor Network is widely used in real time applications. A critical need in Mobile Sensor Network is to achieve energy efficiency during routing as the sensor nodes have scarce energy resource. The nodes' mobility in MWSN poses a challenge to design an energy efficient routing protocol. Clustering helps to achieve energy efficiency by reducing the organization complexity overhead of the network which is proportional to the number of nodes in the network. This paper proposes"EERA: Energy Efficient Routing Algorithm for Mobile Sensor Network" is divided into five phases. 1, Cluster Formation 2.Cluster head and Transmission head selection 3.Path Establishment / Route discovery and 4,Data Transmission. Experimental Analysis has been done and is found that the proposed method performs better than the existing method with respect to four parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.497-498
• /
• 2007

The most of important thing when we design a Wireless Sensor Network is resources. You have to consider energy efficient operation When you design Wireless Sensor Network. Because Sensor devices have a limited resources. In this paper, we proposed energy efficiency localization technique in Wireless Sensor Network. We used Cell ID technique for location search. This method can reduce power consumption and the network life time will be extension.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.429-432
• /
• 2007

For smart structure technologies, the interests in wireless sensor networks for structural health monitoring are growing. The wireless sensor networks reduce the installation of the wire embedded in the whole structure and save the costs. But the wireless sensor networks have lots of limits and there are lots of researches and developments of wireless sensor and the network for data process. Most of the researches of wireless sensor network is applying to the civil engineering structure and the researches for the highrise building are required. And strain-based SHM gives the local damage information of the structures which acceleration-based SHM can not. In this paper, concept of wireless sensor network for structural health monitoring of highrise building is suggested. And verifying the feasibility of the strain-based SHM a strain sensor board has developed and tested by experiments.

• 정보학연구
• /
• 제12권3호
• /
• pp.1-6
• /
• 2009

This paper has focused on the development of an educational sensor network (ESN) based on wireless sensor networks(WSN) and pervasive monitoring systems for students' activity during scientific experiments. A number of WSN systems have been proposed with integrated wireless transmission, mounted sensor boards and local processing. However, there is no trail to employ WSN on the educational field. In this paper, to facilitate research and development using wireless sensor network and multi-sensor data fusion, the educational sensor network (ESN) hardware development platform is presented. The ESN project is conducted over one semester time period (Spring Semesters). It involves approximately twenty middle school students who enrolled a gifted program in Kongju National University. Though under prepared, these students are in general highly motivated to learning specially when presented with the ESN project. An ESN project such as this is expected to provide an excellent means for teaching and learning scientific and mathematical principles.

• 한국컴퓨터정보학회지
• /
• 제14권2호
• /
• pp.199-204
• /
• 2006

센서 네트워크는 센싱(sensing), 연산(computation), 통신(communication) 능력을 갖춘 센서 노드들의 무선 네트워크라고 할 수 있다. 각각의 센서 노드들은 노드에 있는 하나 이상의 센서들에 의해 얻어지는 데이터아이템들을 생성한다. 이러한 특징은 센서 네트워크가 분산 데이터베이스 시스템과도 유사한 특징을 가지고 있음을 알 수 있다. 그러나 센서 네트워크에서 센서 노드의 제한된 전력(power)과 메모리 자원은 가장 큰 단점이며 주요 연구 대상이 되고 있다. 본 연구에서는 이러한 센서 네트워크 환경에서 발생되는 데이터 즉, 센서 데이터 스트림을 제한된 자원을 효율적으로 활용하면서 질의에 대해 효율적으로 응답하는 방안을 여러 가지 측면에서 모색해 보았다.

• 제어로봇시스템학회논문지
• /
• 제15권8호
• /
• pp.867-875
• /
• 2009

A wireless sensor network inherently comprises a plurality of sensor nodes widely deployed for sensing environmental information. To add new functions or to correct some faulty functions of an existing wireless sensor network, the firmware for each sensor node needs to be updated. Firmware update would be quite troublesome if it requires the gathering, reprogramming, and redeploy of all of already deployed sensor nodes. Over-the-air programming (OTA) facilitates the firmware update process, thereby allowing convenient maintenance of an already-deployed sensor network. This paper proposes and implements a remote firmware update mechanism for a TDMA-based wireless sensor network, in which the firmware for sensor nodes constituting the TDMA-based sensor network can be easily updated and the update process can be conveniently monitored from a remote site. We verify the validity of the proposed firmware update method via experiments and introduce three wireless sensor networks installed in outdoor sites in which the proposed firmware update mechanism has been exploited.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.682-684
• /
• 2007

본 논문은 USN 구현을 위한 무선 노드를 실제로 제작하여 센서 네트워크 시스템을 구성하는데 그 목적이 있다. 노드는 Xilinx사의 CPLD와 FPGA, UHF RF 송수신모듈(Bim-433-F), Micronas사의 Hall Sensor로 구현하였으며 CPLD와 FPGA는 ISE를 사용하여 Verilog-HDL로 설계하였다. 네트워크는 PC와 게이트웨이 역할을 하는 싱크노드 1대 그리고 센서 노드 3대로 구성하였다. 개발된 노드들은 다중경로 네트워크를 통해 빌딩 내에서 40m까지 데이터전송이 가능하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.91-94
• /
• 2004

Ubiquitous sensor network is to manage and collect information autonomously by communicating user around device. Security requirements in Ubiquitous based on sensor network are as follows: a location of sensor, a restriction of performance by low electric power, communication by broadcasting, etc. We propose new mutual authentication protocol using a low power of sensor node. This protocol solved a low power problem by reducing calculation overload of sensor node using two steps, RM(Register Manager) and AM(Authentication Manager). Many operations performing the sensor node itself have a big overload in low power node. Our protocol reduces the operation number from sensor node. Also it is mutual authentication protocol in Ubiquitous network, which satisfies mutual authentication, session key establishment, user and device authentication, MITM attack, confidentiality, integrity, and is safe the security enemy with solving low electric power problem.

• 디지털산업정보학회논문지
• /
• 제10권1호
• /
• pp.39-45
• /
• 2014

This paper proposes an architecture of a sensor network for gathering data under a powerful beam cluster tree architecture. This architecture is used when there is a need to gather data from sensor node where there is no sink node connected to an existing network, or it is required to get a series of data specific to an event or time. The transmit distance of the beam signal is longer than that of the usual sensor node. The nodes of the network make a tree network when receiving a beam message transmitting from the powerful root node. All sensor nodes in a sink tree network synchronize to the superframe and know exactly the sequence value of the current superframe. When there is data to send to the sink node, the sensor node sends data at the corresponding allocated channel. Data sending schemes under the guaranteed time slot are tested and the delay and jitter performance is explained.

• Journal of Communications and Networks
• /
• 제11권4호
• /
• pp.406-415
• /
• 2009

In this work, we consider performance modeling of a wireless sensor network with a time division multiple access (TDMA) media access protocol with slot reuse. It is assumed that all the nodes are peers of each other and they have two modes of operation, active and sleep modes. We model the sensor network as a Jackson network with unreliable nodes with on and off states. Active and sleep modes of sensor nodes are modeled with on and off states of unreliable nodes. We determine the joint distribution of the sensor node queue lengths in the network. From this result, we derive the probability distribution of the number of active nodes and blocking probability of node activation. Then, we present the mean packet delay, average sleep period of a node and the network throughput. We present numerical results as well as simulation results to verify the analysis. Finally, we discuss how the derived results may be used in the design of sensor networks.