• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.451-457
• /
• 2016

To improve security in the data communication field, many studies on the application of chaotic signals to encryption have been conducted in recent years. In this study, a new security protocol where the initial value sensitivity and noise similarity of chaotic signals have been applied to an RFID communication channel was designed. In the case of chaotic systems, if the initial values become identical, the same signals are generated at the same time after that point even though the two systems have been calculated independently. Therefore, an unpredictable security channel can be produced based on such characteristics. However, a security channel can be produced only when an initial value is shared in advance, and thus there is a potential problem of infringement during the transmission of the initial value. To resolve this problem, a method in which a certain proportion of new chaotic signals are applied to two chaotic systems for communication and are then synchronized after some time was proposed. This new method can conceal the initial value, and thus can resolve the problem of the existing communication method using chaotic signals. The designed method was verified with the encryption and decryption of images. It is expected that a more secure RFID system could be established by applying the communication protocol proposed in this study to insecure RFID communication channels.

• Microbiology and Biotechnology Letters
• /
• v.32 no.3
• /
• pp.256-264
• /
• 2004

A new primer set was developed for the detection and identification of Xanthomonas oryzae pv. oryzae, the bacterial leaf blight (BLB) pathogen in rice plant. The nucleotide sequence of hpaA gene was determined from X. o. pv. oryzae str. KACC10331, and the sequence information was used to design primers for the application of the polymerase chain reaction (PCR). The nucleotide sequence of hpaA from X. o. pv. oryzae str. KACC 10331 was aligned with those of X. campestris pv. vesicatoria, X. campestris pv. campestris, X. axonopodis pv. citri, and X. axonopodis pv. glycines. Based on these results, a primer set(XOF and XOR) was designed for the specific detection of hpaA in X. o. pv. oryzae. The length of PCR products amplified using the primer set was 534-bp. The PCR product was detected from only X. o. pv. oryzae among other Xanthomonas strains and reference bacteria. This product was used to confirm the conservation of hpaA among Xanthomonas strains by Southern-blotting. Furthermore, PCR amplification with XOF and XOR was used to detect the pathogen in an artificially infected leaf. The sensitivity of PCR detection in the pure culture suspension was also determined. This PCR-based detection methods will be a useful method for the detection and identification of X. o. pv. oryzae as well as disease forecasting.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.96-108
• /
• 2015

A passive containment cooling system has been designed to remove the heat inside a containment during accidents without external power supply. In this work, the PCCS was introduced in the APR1400 plant to replace the containment spray system and, then, the thermal-hydraulic performance of the PCCS was analyzed using the system thermal-hydraulic computer code, MARS. A double-ended cold-leg break accident, which is known to induce the maximum pressure in the containment, is simulated, where the thermal hydraulics of the PCCS, the reactor coolant system, and the containment are simultaneously simulated. The results of the calculations showed that the PCCS can replace the existing spray system and that the containment building and its internal structure also play a very important role for the heat removal during the accident. Some sensitivity calculations were carried out to evaluate the model uncertainty and the effects of design parameters. The limitations of the PCCS are also discussed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10143-10149
• /
• 2015

Background and Aim: No firm evidence of HPV infection in esophageal cancer has been established to date. The aim of this meta-analysis was to investigate the prevalence of HPV 16 in esophageal cancer in China, which had a high burden of the disease. Materials and Methods: Studies on HPV infection and esophageal cancer were identified and a random-effects model was used to pool the summary prevalence and corresponding 95% confidence intervals (CIs). Results: A total of 3,429 esophageal cancer cases were evaluated from 26 eligible studies in this meta-analysis. The summary estimate for HPV16 prevalence was 0.381 (95% CI: 0.283, 0.479). The prevalence varied by geographical areas of the study, publication year, HPV detection method and types of specimen. In sensitivity analysis, HPV 16 prevalence ranged from 0.368 (95% CI: 0.276, 0.460) to 0.397 (95% CI: 0.286, 0.508). Conclusions: The results indicate a relatively high level of HPV 16 prevalence in esophageal cancer among Chinese population, although there was variation between different variables. Further studies are needed to elucidate the role of HPV in esophageal carcinogenesis with careful consideration of study design and laboratory detection method, providing more accurate assessment of the HPV status in esophageal cancer.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.52-59
• /
• 2007

A field mill capable of measuring the magnitude and polarity of electric fields at the ground level was studied to apply to a lightning warning system as a sensor. We designed and fabricated a planar-shutter type field mill with a rotating-vanes. A calibration of the field mill was performed in a vertically symmetrical arrangement which consists of two equal size parallel round plates to form a homogeneous electrical fields. The sensitivity of the field mill was adjusted at 0.5[V/kV/m], and this covers a ranges from 200[V/m] to 20[kV/m]. After the calibration experiment, the field mill was installed on the roof of a building to measure the changes of electric field intensity caused by thunderclouds. During the period from July 1. 2006 to July 15. 2006, the electric field intensity was recorded a ranges of $+2[kV/m]{\sim}-6[kV/m]$ depending on generation, extinction and movement of thunderclouds. From the actual test on the ground it is confirmed that the field mill has a good performance necessary for the measurement of DC electric fields.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.2
• /
• pp.157-163
• /
• 2015

To establish National Reference Method (NRM) for $PM_{2.5}$, operational performance of 5 different commercial gravimetric-based $PM_{2.5}$ measuring instruments was assessed at Bulkwang monitoring station from January 23, 2014 to February 28, 2014. First, physical properties, design, and functional performance of the instruments were assessed. Evaluation was carried out to determine whether operating method for the instruments and levels of QA/QC activities meet the data quality objectives (DQOs). To verify whether DQOs were satisfied, reproducibility of QA/QC procedures, accuracy, relative sensitivity, limit of detection, margin of error, and coefficient of determination of the instruments were also evaluated. Results of flow rate measurement of 15 candidate instruments indicated that all the instruments met performance criteria with accuracy deviation of 4.0% and reproducibility of 0.6%. Comparison of final $PM_{2.5}$ mass concentrations showed that the coefficient of determination ($R^2$) values were greater than or equal to 0.9995, and concentration gradient ranged from 0.97 to 1.03. All the instruments satisfied criteria for NRM with the estimated precision of 1.47~2.60%, accuracy of -1.90~3.00%, and absolute accuracy of 1.02~3.12%. This study found that one particular type of measuring instrument was proved to be excellent, with overall evaluation criteria satisfied.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.10
• /
• pp.2627-2640
• /
• 1998

In this paper, we analyze the performance of the virtual cell system[1] for the transmission of IP datagrams in mobile computer communications. A virtual cell consistsof a group of physical cells shose base stationsl are implemented b recote bridges and interconnected via high speed datagram packet switched networks. Host mobility is supported at the data link layer using the distributed hierachical location information of mobile hosts. Given mobility and communication ptems among physical cells, the problem of deploying virtual cells is equivalent to the optimization cost for the entire system where interclster communication is more expesive than intracluster communication[2]. Once an iptimal partitionof disjoint clusters is obtained, we deploy the virtual cell system according to the topology of the optimal partition such that each virtual cell correspods to a cluser. To analyze the performance of the virtual cell system, we adopt a BCMP open multipel class queueing network model. In addition to mobility and communication patterns, among physical cells, the topology of the virtual cell system is used to determine service transition probabilities of the queueing network model. With various system parameters, we conduct interesting sensitivity analyses to determine network design tradeoffs. The first application of the proposed model is to determine an adequate network bandwidth for base station networking such that the networks would not become an bottleneck. We also evaluate the network vlilization and system response time due to various types of messages. For instance, when the mobile hosts begin moving fast, the migration rate will be increased. This results of the performance analysis provide a good evidence in demonsratc the sysem effciency under different assumptions of mobility and communication patterns.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.818-823
• /
• 2015

In this study, FT reaction in a microchannel was simulated using computational fluid dynamics(CFD), and sensitivity analyses conducted to see effects of channel geometry variables, namely, process channel width, height, gap between process channel and cooling channel, and gap between process channels on the channel temperature profile. Microchannel reactor considered in the study is composed of five reaction channels with height and width ranging from 0.5 mm to 5.0 mm. Cooling surfaces is assumed to be in isothermal condition to account for the heat exchange between the surface and process channels. A gas mixture of $H_2$ and CO($H_2/CO$ molar ratio = 2) is used as a reactant and operating conditions are the following: GHSV(gas hourly space velocity) = $10000h^{-1}$, pressure = 20 bar, and temperature = 483 K. From the simulation study, it was confirmed that heat removal in an FT microchannel reactor is affected channel geometry variables. Of the channel geometry variables considered, channel height and width have significant effect on the channel temperature profile. However, gap between cooling surface and process channel, and gap between process channels have little effect. Maximum temperature in the reaction channel was found to be proportional to channel height, and not affected by the width over a particular channel width size. Therefore, microchannels with smaller channel height(about less than 2 mm) and bigger channel width (about more than 4 mm), can be attractive design for better heat removal and higher production.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.103-115
• /
• 2011

Concrete slab curls and warps due to the uneven distribution of temperature and moisture and as the result, internal stress develops within the slab. Therefore, environmental loads must be considered in addition to the traffic loads to predict the lifespan of the concrete pavement more accurately. The strength of the concrete slab is gradually decreases to a certain level at which fatigue cracking is generated by the repetitive traffic and environmental loadings. In this study, a new fatigue regression model was developed based on the results from previously performed studies. To verify the model, another laboratory flexural fatigue test program which was not used in the model development, was conducted and compared with the predictions of other existing models. Each fatigue model was applied to analysis logic of cumulative fatigue damage of concrete pavement developed in the study. The sensitivity of cumulative fatigue damage calculated by each model was analyzed for the design factors such as slab thickness, joint spacing, complex modulus of subgrade reaction and the load transfer at joints. As the result, the model developed in this study could reflect environmental loading more reasonably by improving other existing models which consider R, minimum/maximum stress ratio.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.250-254
• /
• 2002

Intergranular corrosion of austenitic stainless steels is a conventional and momentous problem during welding and high temperature use. One of the major reasons for such intergranular corrosion is so-called sensitization, i.e., chromium depletion due to chromium carbide precipitation at grain boundaries. Conventional methods for preventing sensitization of austenitic stainless steels include reduction of carbon content in the material, stabilization of carbon atoms as non-chromium carbides by the addition of titanium, niobium or zirconium, local solution-heat-treatment by laser beam, etc. These methods, however, are not without drawbacks. Recent grain boundary structure studies have demonstrated that grain boundary phenomena strongly depend on the crystallographic nature and atomic structure of the grain boundary, and that grain boundaries with coincidence site lattices are immune to intergranular corrosion. The concept of "grain boundary design and control", which involves a desirable grain boundary character distribution, has been developed as grain boundary engineering. The feasibility of grain boundary engineering has been demonstrated mainly by thermomechanical treatments. In the present study, a thermomechanical treatment was tried to improve the resistance to the sensitization by grain boundary engineering. A type 304 austenitic stainless steel was pre-strained and heat-treated, and then sensitized, varying the parameters (pre-strain, temperature, time, etc.) during the thermomechanical treatment. The grain boundary character distribution was examined by orientation imaging microscopy. The intergranular corrosion resistance was evaluated by electrochemical potentiokinetic reactivation and ferric sulfate-sulfuric acid tests. The sensitivity to intergranular corrosion was reduced by the thermomechanical treatment and indicated a minimum at a small roll-reduction. The frequency of coincidence-site-lattice boundaries indicated a maximum at a small strain. The ferric sulfate-sulfuric acid test showed much smaller corrosion rate in the thermomechanically-treated specimen than in the base material. An excellent intergranular corrosion resistance was obtained by a small strain annealing at a relatively low temperature for long time. The optimum parameters created a uniform distribution of a high frequency of coincidence site lattice boundaries in the specimen where corrosive random boundaries were isolated. The results suggest that the thermomechanical treatment can introduce low energy segments in the grain boundary network by annealing twins and can arrest the percolation of intergranular corrosion from the surface.