• 대한수학회지
• /
• 제46권2호
• /
• pp.225-236
• /
• 2009

The equicontinuity and scattering properties of continuous semi-flows are studied on a compact metric space. The main results are obtained as follows: first, the complexity function defined by the spanning set is bounded if and only if the system is equicontinuous; secondly, if a continuous semi-flow is topologically weak mixing, then it is pointwise scattering; thirdly, several equivalent conditions for the time-one map of a continuous semi-flow to be scattering are presented; Finally, for a minimal continuous map it is shown that the "non-dense" requirement is unnecessary in the definition of scattering by using open covers.

• Structural Engineering and Mechanics
• /
• 제10권4호
• /
• pp.371-392
• /
• 2000

Application of "advanced analysis" methods suitable for non-linear analysis and design of steel frame structures permits direct and accurate determination of ultimate system strengths, without resort to simplified elastic methods of analysis and semi-empirical specification equations. However, the application of advanced analysis methods has previously been restricted to steel frames comprising only compact sections that are not influenced by the effects of local buckling. A concentrated plasticity method suitable for practical advanced analysis of steel frame structures comprising non-compact sections is presented in this paper. The pseudo plastic zone method implicitly accounts for the effects of gradual cross-sectional yielding, longitudinal spread of plasticity, initial geometric imperfections, residual stresses, and local buckling. The accuracy and precision of the method for the analysis of steel frames comprising non-compact sections is established by comparison with a comprehensive range of analytical benchmark frame solutions. The pseudo plastic zone method is shown to be more accurate and precise than the conventional individual member design methods based on elastic analysis and specification equations.

• 충청수학회지
• /
• 제28권3호
• /
• pp.377-384
• /
• 2015

It is well known that the entropy map is upper semi-continuous for expansive homeomorphisms on a compact metric space. Recently, Morales [3] introduced the notion of measure expansiveness which is general than that of expansiveness. In this paper, we prove that the entropy map is upper semi-continuous for measure expansive homeomorphisms.

• 대한수학회보
• /
• 제33권2호
• /
• pp.193-204
• /
• 1996

Let U and V be nonempty compact subsets of two Hausdorff topological vector spaces. Suppose that a function $J : U \times V \to R$ is such that for each $\upsilon \in V, J(\cdot, \upsilon)$ is lower semi-continuous and convex on U, and for each $ u \in U, J(u, \cdot)$ is upper semi-continuous and concave on V.

• 호남수학학술지
• /
• 제20권1호
• /
• pp.135-145
• /
• 1998

In this paper, we focus on the convex-valued selection theorem out of four main selection theorems; zero-dimensional, convex-valued, compact-valued, finite-dimensional theorems based on Michael's papers. We prove some theorems about lower semi-continuous set-valued mappings, and derive some applications to closed continuous set-valued mappings and to functional analysis. We also give a partial solution to the open problem posed by Engelking, Heath, and Michael.

• 대한수학회논문집
• /
• 제30권4호
• /
• pp.493-504
• /
• 2015

The aim of this paper is to present some properties of sT-continuous functions. Moreover, we obtain a characterization and preserving theorems of semi-compact, S-closed and s-closed spaces.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.258-259
• /
• 2006

New powder compaction process, in which a Bingham semi-solid/fluid mold is utilized, is developed to fabricate micro parts. In the present process, a powder material is filled as slurry in a solid wax mold, dried and compressed. The wax is heated during compaction and becomes semi-solid state, which can acts as a pressurized medium for isostatic compaction. Since the compacted micro parts are very fragile, the mold's temperature is controlled to higher than its melting point during unloading, to avoid breakage of the compacts. To demonstrate effectiveness of this process, some micro compacts of alumina are shown as examples.

• 천문학회지
• /
• 제40권4호
• /
• pp.187-188
• /
• 2007

This contribution to the IV Korea-Mexico meeting deals with the hydrodynamics of the matter reinserted within super star clusters (SSCs) by both stellar winds and supernova explosions, results recently printed in The Astrophysical Journal (Silich et al. 2007). The motivation of such a project arose from the persistent presence of the small mass and compact HII regions that sit right on top of many massive and compact SSCs, from which one expects a large mechanical energy power. The data used for our calculations appear only recently (see Smith et al. 2006) for the massive and compact SSC M82-A1. We presented in our paper the calculated flow, derived through analytical and semi-analytical methods, which led to almost identical results. We have found out that the only way of accommodating a compact HII region (4.5 pc in radius, in the case of M82-A1) on top of a 6.3 Myr old and massive (> $10^6M_{\bigodot}$) SSC with a half light radius of 3 pc, requires of two assumptions: a very low heating efficiency (< 10%) within the cluster, what leads to a bimodal solution (see Tenorio-Tagle et al. 2007) and a high pressure in the surrounding medium.

• 한국전자파학회논문지
• /
• 제23권12호
• /
• pp.1359-1364
• /
• 2012

칩 인덕터를 이용하여 넓은 저지 대역과 소형화 특성을 갖는 C-밴드 semi-lumped 저역 통과 여파기를 제안하였다. 칩 인덕터의 자기 공진 주파수(SRF: Self Resonance Frequency) 특성을 유지하기 위하여 추가된 분리형 인덕터와 SRF 특성으로 인해 발생되는 감쇠 폴을 이용하여 광대역 저지 대역과 높은 저지 특성을 얻을 수 있었다. 3차 elliptic function 여파기에 칩 인덕터(L: 9.1 nH, SRF: 5.5 GHz, Q: 25)를 적용한 결과, 마이크로스트립 라인 인덕터로 구현한 여파기보다 크기가 37.4 % 감소하였으며, 삽입 손실이 0.38 dB, 차단 주파수는 920 MHz, 1.43~7.8 GHz의 넓은 저지 대역(20 dB 이하) 특성을 가졌다.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.12-21
• /
• 1997

A model for analysis of the crushing mechanism of thin-walled rectangular tube is presented. The crushing modes of rectangular tubes may be characterized as either compact or noncompact and the model presented only considers compact modes. The unloading process in the crushing are categorized into three different stages where the distinction is based on the ratio of outward to inward fold length. Using the kinematic relations and the energy conservation principle, the instantaneous crush load is derived. An approximate equation that considers the rolling behavior is also given so that the crush load history may be established. The equation is experimentally proved.