• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.145.1-145.1
• /
• 2011

We present results of two-color VR photometry of the intermediate polar RXS J1803. The data were aquired using the Korean 1-m telescope located at Mt. Lemmon, USA. Different "high" and "low" luminosity states, similar to other intermediate polars, were discovered. No statistically significant variability of the color index with varying luminosity was detected. The orbital variability was found to be not statistically significant. Spin maxima timings were determined, as well as the photometric ephemeris for the time interval of our observations. The spin period variations, caused by interaction of the accretion structure with the rotating magnetic white dwarf, were also detected. These variations are of complicated character, and their study requires further observations. We determine the color transformation coefficients for our photometric systems, and improve on the secondary photometric standards.

• Journal of the Korean Chemical Society
• /
• v.62 no.2
• /
• pp.106-112
• /
• 2018

Ice-binding proteins have an affinity for ice. They create a gap between the melting and freezing points by inhibiting the growth of ice, known as thermal hysteresis (TH). Interestingly, moderately active LeIBP and hyperactive FfIBP are almost identical in primary and tertiary structures, but differ in TH activity. The TH of FfIBP is tenfold higher than that of LeIBP, due to a subtle difference in their ice-binding motifs. To further evaluate the difference in TH, the interactions were investigated by ice-etching and molecular docking. Ice-etching showed that FfIBP binds to the primary and secondary prism, pyramidal, and basal planes; previously, LeIBP was found to bind to the basal and primary prism planes. Docking analysis using shape complementarity (Sc) showed that the hyperactive FfIBP had higher Sc values for all four ice planes than LeIBP, which is comparable with TH. Docking can be used to describe the hyperactivity of IBPs.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.4
• /
• pp.169-173
• /
• 2011

In this study, Al-N codoped p-type zinc oxide (ZnO) thin films were deposited on Si and homo-buffer layer templates in a mixture of $N_2$ and $O_2$ gas with ceramic ZnO:(2 wt% $Al_2O_3$) as a sputtering target using DC- magnetron sputtering. X-ray diffraction spectra of two-theta diffraction showed that all films have a predominant (002) peak of ZnO Wurtzite structure. As the $N_2$ fraction in the mixed $N_2$ and $O_2$ gases increased, field emission secondary electron microscopy revealed that the surface appearance of codoped films on Si varied from smooth to textured structure. The p-type ZnO thin films showed carrier concentration in the range of $1.5{\times}10^{15}-2.93{\times}10^{17}\;cm^{-3}$, resistivity in the range of 131.2-2.864 ${\Omega}cm$, and mobility in the range of $3.99-31.6\;cm^2V^{-1}s^{-1}$ respectively.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3521-3524
• /
• 2010

MTH1880 is a hypothetical protein derived from Methanobacterium thermoautotrophicum, thermophilic methanogen. The solution structure determined by NMR spectroscopy showed that it has a novel $\alpha+\beta$-fold with a highly acidic ligand binding pocket. Since MTH1880 maintains its ultra-stable structural characteristics at both high temperature and pressure, it has been considered as an excellent model for studying protein folding. To initiate the structural and folding study of MTH1880 in proving its unusual stability, we performed the site directed mutagenesis and biochemical analysis of MTH1880 mutants. Data from circular dichroism and NMR spectroscopy suggest that the point mutations perturbed the structural stability of protein even though the secondary structure is retained. This study will provide the useful information in understanding the role of participating residues during folding-unfolding process and our result will be used in designing further folding experiments for hyper-thermopile proteins like MTH1880.

• Journal of The Korean Association For Science Education
• /
• v.4 no.2
• /
• pp.74-81
• /
• 1984

중등 과학교사 양상에 있어서 기초 교양 과목과 교육 일반론 및 과학 과목은 중요한 부분이지만 가장 핵심적이고 특유해야할 과목은 과학교육 관계 과목이다. 많은 경우 $2{\sim}3$학점의 한 과목을 필수로 제시되는 "물리교육", "화학교재", "생물교수법" 등의 분야별 과목이 안이하고 무의미하게 제시되는 것이 아닌가 하는 직관적 판단으로부터 우선 한국의 실태를 조사하고 장기적이고 포괄적인 연구 개발의 기본적 모형을 구안하려는 것이 본 연구의 목적이다. 연구의 한 단계로 전국 사범대학 과학교육 관계과나 전공을 대상으로 설문지 방법과 면담을 통해 학사 학위 및 중등 과학교사 자격을 위한 취소 이수학점 그리고 일반 및 과학 교육 관계 과목에 대해 조사하였다. 특별히 과학교육관계 과목에 대해서는 상세하게 필수 및 선택 과목 수와 학점, 대상 학생과 교수, 과목의 목표, 내용, 교육 자료와 평가 방법 등을 조사 분석하였다. 또한 설문의 두 번째 범주인 과학교육 과목 담당 교수의 중등 과학 교사 양성 교육과정에 대한 일반적인 의견과 과학 교육 과목에 대한 구체적 의견을 종합 분석하였다. 이러한 실태 조사와 의견 분석을 바탕으로 과학 교육 과목의 총 이수 학점에 대한 비율, 과목수와 명칭 그리고 교육 내용의 기본적 사항을 제시함으로써 자료개발과 실제 지도를 위한 모형적 연구를 수행하였다.

• Current Optics and Photonics
• /
• v.6 no.6
• /
• pp.627-633
• /
• 2022

To realize uniform side pumping of solar lasers and improve their output power, a solar concentrating system based on off-axis parabolic mirrors is proposed. Four identical off-axis parabolic mirrors with focal length of 1,000 mm are toroidally arranged as the primary concentrator. Four two-dimensional compound parabolic concentrators (2D-CPCs) are designed as a secondary concentrator to further compress the focused spot induced by the parabolic mirrors, and the focused light is then homogenized by four rectangular diffusers and provides uniform pumping for a laser-crystal rod to achieve solar laser emission. Simulation results show that the solar power received by the laser rod, uniformity of the light spot, and output power of the solar laser are 7,872.7 W, 98%, and 351.8 W respectively. This uniform pumping configuration and concentrator design thus provide a new means for developing high-power side-pumped solid-state solar lasers.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1679-1683
• /
• 2018

Polycrystalline $BaSrCo_2(Fe_{1-x}Al_x)_{12}O_{22}$ (x = 0.00, 0.01, 0.05, and 0.10) samples were synthesized by polymerizable complex method. Based on the Rietveld refinement, crystal structures of the samples were found to be single-phased and determined to be rhombohedral with space group of R-3m. The hysteresis curves of the samples were measured under 15 kOe at various temperatures ranging from 4.2 and 295 K. It shows that they were not saturated with increasing Al ion contents due to the reduction of magnetic anisotropy. $M_{15kOe}$ was decreased with increasing Al ions contents. We expect that non-magnetic Al ions preferentially occupy the up-spin site of $18h_{VI}$, $3b_{VI}$, and $3a_{VI}$. The $M{\ddot{o}}ssbauer$ spectra of the samples were obtained at 295 K, and analyzed with sixsextets for Fe sites corresponding to the Y-type hexaferrite crystallography sites. The <$E_Q$> shows abrupt changes, and the <$H_{hf}$> shows abrupt decreases around x = 0.05 due to the coexistence of magnetic secondary phases.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.5
• /
• pp.392-409
• /
• 2023

The amount of wood waste from furniture production is increasing. Wood waste is diverse and ranges from wood-splitting residues to leftovers from furniture production. Wood waste occurs in companies, household-based industries, and other forms of business where waste accumulates; therefore, an environmental and ethical policy is needed. The aim of this study was to identify products created using wood waste and describe government regulations related to environmental policies. We analyzed the management of wood waste for use as a new product so that it is useful, does not become waste, and complies with policies related to environmental ethics. A case study design using qualitative methods was used. This research focused on managing wood waste in Jepara's furniture and crafts industry for the 2010-2021 period, using 23 sources from primary, secondary, and other supporting documents. Data were collected through observation or gathering information related to research needs, conducting closed-door interviews with research sources, documenting data to strengthen research findings, and using online questionnaires to corroborate information related to wood waste management. This article presents wood waste products designed with optimized environmental ethics and awareness of environmental laws in wood-based industries.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4209-4214
• /
• 2022

Precise modelling of the interaction of ions with materials is important for many applications including material characterization, ion implantation in devices, thermonuclear fusion, hadron therapy, secondary particle production (e.g. neutron), etc. In this study, a new approach using the Geant4 toolkit in combination with the Bayesian regularization (BR) learning algorithm of the feed-forward neural network (FFNN) is developed to estimate the range of ions in materials accurately and quickly. The different incident ions at different energies are interacted with the target materials. The Geant4 is utilized to model the interactions and to calculate the range of the ions. Afterward, the appropriate architecture of the FFNN-BR with the relevant input features is utilized to learn the modelled ranges and to estimate the new ranges for the new cases. The notable achievements of the proposed approach are: 1- The range of ions in different materials is given as quickly as possible and the time required for estimating the ranges can be neglected (i.e. less than 0.01 s by a typical personal computer). 2- The proposed approach can generalize its ability for estimating the new untrained cases. 3- There is no need for a pre-made lookup table for the estimation of the range values.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.215-221
• /
• 2023

Proton treatment may deliver a larger dose to a patient's skin than traditional photon therapy, especially when a range shifter (RS) is inserted in the beam path. This study investigated the effects of an RS on skin dose while considering RS with different thicknesses, airgaps and materials. First, the physical model of the scanning nozzle with RS was established in the TOol for PArticle Simulation (TOPAS) code, and the effects of the RS on the skin dose were studied. Second, the variations in the skin dose and isocenter beam size were examined by reducing the air gap. Finally, the effects of different RS materials, such as polymethylmethacrylate (PMMA), Lexan, polyethylene and polystyrene, on the skin dose were analysed. The results demonstrated that the current RS design had a negligible effect on the skin dose, whereas the RS significantly impacted the isocenter beam size. The skin dose was increased considerably when the RS was placed close to the phantom. Moreover, the magnitude of the increase was related to the thickness of the inserted RS. Meanwhile, the results also revealed that the secondary proton primarily contributed to the increased skin dose.