• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.317-317
• /
• 2014

The structure performance of a sealed power facilities and the explosion simulation contains significant amounts of scatter, and variability has been characterized in material properties of the structure, a sealed space density, combustible gas volume, gas concentrativeness, ignition site, and gas volume. In order to deal with such uncertainties, structural reliability analysis calculates the failure probability and the reliability index relevant to selected limit states providing quantitative measures of these uncertainties. In this study, structure safety assessment method on the explosion of a sealed power facilities was proposed by using the response surface method (RSM).

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.309-310
• /
• 2016

Sealed flooded lead acid batteries are becoming popular in the industry because of their low cost as compared to their counterparts. State of Charge (SOC) estimation has always been an important factor in battery management systems. For the accurate SOC estimation, open circuit voltage (OCV) hysteresis should be modelled accurately. The hysteresis phenomenon of the sealed flooded lead acid battery is discussed in detail and its ultimate modeling is proposed based on the conventional parallelogram method. The SOC estimation is performed by using Unscented Kalman Filter (UKF) while the parameters of the battery are estimated using Auto Regressive with external input (ARX) method. The validity of the proposed method is verified by the experimental results. The SOC estimation error by the proposed method is less than 3 % all wing the 125hr test.

• Journal of the Korean Vacuum Society
• /
• v.21 no.1
• /
• pp.1-5
• /
• 2012

The measurement device of internal pressures of small components sealed hermetically was developed. The internal pressure of a sample measured with this device was 43.151 kPa, and the expanded uncertainty ($\kappa$=2) was 741 Pa. The resultant measurement ability of internal pressures in small vacuum components, which had been almost impossible previously, shows the possibility of internal vacuum detection of hermetically sealed parts.

• Carbon letters
• /
• v.10 no.3
• /
• pp.234-238
• /
• 2009

The field emitters were fabricated by screen-printing of carbon nanotube paste, and their emission stabilities were evaluated. It was found that the emission stability measured in a sealed device is much higher than that measured in a vacuum chamber in spite of similar pressure. This was because oxygen gas was scarcely remained in the sealed device, while the gas is continuously supplied into the vacuum chamber during the stability measurement. It was found that the plasma treatment etched the protruded CNTs, resulting in the uniform height of CNT tips. As a result, the stability was increased remarkably. It was also found that the stability of CNT paste emitter was improved by electrical aging and that the optimum condition for the aging was varied with the size of emitter.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.557-560
• /
• 2000

Combination of SDB(Si-wafer Direct Bonding) and electrochemical etch-stop in TMAH anisotropic etchant can be used to create a variety of MEMS(Micro Electro Mechanical System). Especially, fabrication of SDB SOI structures using electrochemical etch-stop is accurate method to fabrication of 3D(three-dimensional) microstructures. This paper describes on the fabrication of SDB SOI structures with sealed cavity for MEMS applications and thickness control of active layer on the SDB SOI structure by electrochemical etch-stop. The flatness of fabricated SDB SOI structure is very uniform and can be improved by addition of TMAH to IPA and pyrazine.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1629-1631
• /
• 2003

고전압 대전류 펄스파워에 사용되는 스위치는 여러 종류가 사용되고 있는데, 커페시터에 저장된 초기의 전자 에너지를 시공적으로 압축하여 수ns ${\sim}$ 수ms의 짧은 시간안에 고출력을 발생시키기 위해서는 펄스파워 장치에 사용되는 커패시터, 인덕터, 저항, 스위치등 회로 소자들의 임피이던스가 작아야 할 필요성이 대두 된다. 따라서 Inverse Pinch Switch(IPS)는 이런 조건을 만족시킬수 있는 스위치로서 각광을 받고 있다. 본 논문에서는 전기트리거형 IPS의 금속 전극부와 절연 ceramic를 brazing하여 sealed off type의 스위치의 제작 과정과 특성을 연구 하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.20-29
• /
• 2016

This study investigates the effect of the absorbent materials on the material properties(compressive strength and drying shrinkage) of natural hwangtoh mortar which is one of the traditional building material in Korea. The absorbent materials used are seaweed paste and Super-Absorbent Polymer(SAP). In addition to the absorbent materials, the initial sealed curing recommended by the standard specification of properties for Korean traditional building materials is also a main interest of this study. Based on the test results of 28 days compressive strength and converged drying shrinkage, it is confirmed that the initial sealed curing for 7 days is effective to reduce the drying shrinkage and to enhance the compressive strength. Thus, it is verified that the recommendation is reasonable and has positive effects on the properties of the mortar. Next, the test results show that the addition of absorbent materials into the mortar is also effective to the two properties depending on their absorption capacity. Thus, it is more effective to use SAP than the seaweed paste because of higher absorption capacity. However, both the initial sealed curing and keeping total water contents of the mortar are required to show this effectiveness. Lastly, the compressive strength is inversely proportional to the drying shrinkage. By using this relation, the reason of the increase of compressive strength due to the initial sealed curing or the addition of absorbent materials is quantitatively explained.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.9 no.2
• /
• pp.9-14
• /
• 1984

The competitive bidding model with the reserve price has been studied by Riley and Samuelson. We extend their studies to the competitive model with the reserve price and the entry fee. First we present the bidder's optimal strategy, the winner's expected profit, the auctioner's expected revenue in the first-price sealed bidding model, and next those in the second-price sealed bidding model.

• Journal of Korean Academy of Oral Health
• /
• v.42 no.4
• /
• pp.145-151
• /
• 2018

Objectives: The purpose of this study was to interpret regional disparities in the number of teeth sealed with pit and fissure sealants, identify the factors that affect these disparities and find solutions for the same. Methods: Data were collected from the National Health Insurance Service and Korean statistical information service using metropolis-city-rural area dental health infrastructure variables, regional health behavior variables, and local finance-related variables. Results: In 2015, the number of teeth sealed with pit and fissure sealants per 100 people was higher in the metropolis or city than in the rural area. There was a positive correlation between the number of teeth sealed with pit and fissure sealants and the number of dentists, dental hygienists, dental institutions, standardization rate of subjective awareness of well-being, standardization rate of brushing after lunch, and the proportion of welfare budget in the general budget. There was a negative correlation with the annual standardization rate of health institution use, the standardization rate of unused medical services, and the local government's financial independence. According to the final model of the multiple regression analysis, while the impact of infrastructure on dentistry was not statistically significant, the statistical significance of standardization rate of brushing after lunch, the local government's financial independence, and the proportion of welfare budget in the general budget were maintained. Conclusions: To reduce regional disparities in the volume of use of pit and fissure sealants, it was concluded that it may be effective to select regions with a consideration of the level of regional economic power, implement separate and appropriate policies and projects, and improve the awareness in residents.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.493-508
• /
• 2023

Round timber materials of 600 mm length, cut from large-cross-section round timber of red pine (Pinus densiflora S. et Z.) of 450 mm width and 4.2 m length, were prepared as the target of kiln drying in this study. After treating the target materials through end sealing (ES), end sealing - kerfing (ES-K), lateral sealing - end sealing - boring (LS-ES-B), or lateral sealing - partial end sealing (LS-PES), the effects of the treatment on the incidence of drying defects were determined. The target materials with exposed lateral surface and sealed cross surface were steamed at the initial temperature of 65℃ above the official pest control temperature of 56℃, followed by kiln drying toward the final temperature of 75℃. The target materials with sealed lateral surfaces, on the other hand, were dried at the initial temperature of 90℃ at almost the maximum temperature of conventional kiln drying, as there is no risk of early check formation caused by surface moisture evaporation. The final temperature was set at approximately 100℃. The drying time, taken for the target materials with initial moisture content of 70%-80% to reach the target moisture content of 19%, varied across treatment conditions. The measured drying time was 1,146 hours (approximately 48 days) for the timber with sealed cross surface and 745 hours (approximately 31 days) for the timber with sealed lateral surface, until the moisture content reached the target level. The formation of surface checks could not be prevented in the control and ES groups, but a definite preventive effect was obtained for the LS-ES-B and LS-PES groups.