• Journal of the Korean Society of Food Culture
• /
• v.37 no.1
• /
• pp.26-38
• /
• 2022

This study used the big data method to analyze the chronological frequency of seafood appearance and variety mentioned by the veritable records of the Joseon dynasty. The findings will be used as a basis for Joseon Period's food cultural research. The web-crawling method was used to digitally scrap from the veritable records of the Joseon dynasty of Joseon's first to the twenty-seventh king. A total of 9,536 cases indicated the appearance of seafood out of the 384,582 articles. Seafood were termed "seafood" as a collective noun 107 times (1.12%), 27 types of fish 8,372 times (87.79%), 3 types of mollusca (1.28%), 18 types of shellfish 213 times (2.23%), 6 types of crustacean 188 times (1.97%), 9 types of seaweed 534 times (5.60%). Fish appeared most frequently out of all the recorded seafood. Sea fish appeared more frequently than the freshwater fish. Kings that showed the most Strong Interest Inventory (SII) were: Sungjong from the 15^thcentury, Sehjo from the 15^th, Youngjo from the 18^th, Sehjong from the 15^th, and Jungjo from the 18^th respectively. Kings of Chosen were most interested in seafood in the 15^th and 18^th centuries.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.2
• /
• pp.61-67
• /
• 2022

A metal salt solution was prepared from valuable metals (Ni, Co, Mn) recovered from a scrap of waste lithium secondary batteries, and an NCM811 precursor was synthesized from the solution. The effect on precursor formation according to reaction time was confirmed by SEM, PSA, and ICP analysis. Based on the analysis results, the electrochemical properties of the synthesized NCM811 precursor and the commercial NCM811 precursor were investigated. The Galvano charge-discharge cycle, rate performance, and Cycle performance were compared, and as a result, there was no significant difference from commercial precursors.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.219-230
• /
• 2023

Marine waste is classified according to its location into coastal waste, floating waste, and submerged waste. As awareness of environmental issues increases, research on marine submerged waste in addition to visible trash is needed. In Korea, which is surrounded by the sea on three sides, this is a study on the distribution of marine sedimentary waste by type in the West Sea of Korea. Through the study, waste synthetic resin, scrap metal, waste tires, and others appeared in the order of large amounts. As a result showing the seriousness of waste synthetic resin among sediments deposited in the West Sea, it is expected to have a huge impact not only on the marine ecosystem but also on our lives in the near future. Through this study, it is judged that it will be helpful for future collection activities by recognizing marine submerged waste that was not known because it was invisible.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.3
• /
• pp.371-381
• /
• 2023

Evaluating the effectiveness of the radiation protection measures deployed at the Centralized Radioactive Waste Management Facility in Ghana is pivotal to guaranteeing the safety of personnel, public and the environment, thus the need for this study. Radiagem^TM 2000 was used in measuring the dose rate of the facility whilst the personal radiation exposure of the personnel from 2011 to 2022 was measured from the thermoluminescent dosimeter badges using Harshaw 6600 Plus Automated TLD Reader. The decay store containing scrap metals from dismantled disused sealed radioactive sources (DSRS), and low-level wastes measured the highest dose rate of 1.06 ± 0.92 µSv·h^-1. The range of the mean annual average personnel dose equivalent is 0.41-2.07 mSv. The annual effective doses are below the ICRP limit of 20 mSv. From the multivariate principal component analysis biplot, all the personal dose equivalent formed a cluster, and the cluster is mostly influenced by the radiological data from the outer wall surface of the facility where no DSRS are stored. The personal dose equivalents are not primarily due to the radiation exposures of staff during operations with DSRS at the facility but can be attributed to environmental radiation, thus the current radiation protection measures at the Facility can be deemed as effective.

• The Research Journal of the Costume Culture
• /
• v.31 no.6
• /
• pp.720-737
• /
• 2023

This study aims to merge Picasso's expressive elements and deconstructive fashion's formative traits, proposing an upcycle fashion design that fuses artistic and philoso-phical aspects. The analysis of Picasso's Cubism identified qualities like liberating revolution, fluidity of vision, geometric reducibility, complex symbolism, and creative imitation. The analysis of Derrida's deconstructionism revealed expressive traits: uncertainty, intertextuality, différance, and dis-de phenomenon. An upscale fashion design was developed based on six Picasso works featuring women. The design was created using the fashion design software CLO 3D and integrated clothing waste and scrap fabrics as materials.The results are as follows. First, upcycle fashion was viewed from a new perspective based on Picasso and Derrida's values. This perspective suggested creating better ethical values by upholding environmental protection in novel ways that overcome limitations rather than destroy existing values indiscriminately. Second, upcycle fashion design methodologies were derived from various perspectives utilizing formative features of Picasso's works and specific expressive features of deconstructed fashion. Third, the direction of mitigating waste and pollution from clothing production and transportation was revealed by making clothes in a virtual space using the CLO 3D program. This study contributed to obtaining various methods for developing upcycle fashion designs using own methods of Picasso and Derrida to diversify the approaches of upcycling, which is relatively stagnant in disassembling.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.15-20
• /
• 2023

In the fine blanking process, which is a press operation known for producing parts with narrow clearances and high precision through the application of high pressure, die roll often occurs during the shearing process when the punch penetrates the material. This die roll phenomenon can significantly reduce the functional surface of the parts, leading to decreased product performance, strength, and fatigue life. In this research, we conducted an in-depth analysis of the factors influencing die roll in the curvature area of the fine blanking process and identified its root causes. Subsequently, we designed and experimentally verified a die roll reduction process specifically tailored for the door latch manufacturing process. Our findings indicate that die roll tends to increase as the curvature radius decreases, primarily due to the heightened bending moment resulting from reduced shape width-length. Additionally, die roll is triggered by the absorption of initial punch energy by scrap material during the early shearing phase, resulting in lower speed compared to the product area. To mitigate the occurrence of die roll, we strategically selected the Shaving process and carefully determined the shaving direction and clearance area length. Our experiments demonstrated a promising trend of up to 75% reduction in die roll when applying the Shaving process in the opposite direction of pre-cutting, with the minimum die roll observed at a clearance area length of 0.2 mm. Furthermore, we successfully implemented this approach in the production of door latch products, confirming a significant reduction in die roll. This research contributes valuable insights and practical solutions for addressing die roll issues in fine blanking processes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.13 no.2
• /
• pp.65-80
• /
• 1980

Processing conditions of the krill products such as paste food, krill protein concentrate, seasoned dried krill, powdered seasoning, meat ball, and snack have been examined and the quality was evaluated chemically and organoleptically. In the processing of paste food, krill juice was yielded $71\%$ and krill scrap $29\%$. The yields of paste and broth from the krill juice showed $53\%$ and $43\%$, respectively. In amino acid composition of the krill paste, proline, glutamic acid, aspartic acid, lysine, and leucine were abundant, while histidine, methionine, tyrosine, serine and threonine were poor. The optimum condition for solvent extraction in the processing of krill protein concentrate was the 5 times repetitive extraction using isopropyl alcohol at $80^{\circ}C$ for 5 mins. The yield of krill protein concentrate when used fresh frozen materials was $10.2\%$ in isopropyl alcohol solvent and $8.8\% in ethyl alcohol, and when used preboiled frozen materials, the yield was $13.0\%$ in isopropyl alcohol and $11.8\%$ in ethyl alcohol. Amino acid composition of krill protein concentrate showed a resemblance to that of fresh frozen krill meat. In quality comparison of the seasoned dried krill, hot air dried krill was excellent as raw materials and sun dried krill was slightly inferior to hot air dried krill, but preboiled frozen krill showed the poorest quality. The result of quality evaluation for seasoning made by combination of dried powdered krill, parched powdered sesame, salt, powdered beef extract, monosodium glutamate, powdered red pepper and ground pepper showed that the hot air dried krill was good in color and sundried krill was favorable in flavor. When krill meat ball was prepared using wheat flour, monosodium glutamate and salt as side materials, the quality of the products added up to $52\%$ of krill meat was good and the difference in quality upon the results of the organoleptic test for raw materials was not recognizable between fresh frozen and preboiled frozen krill. In the experiment for determining the proper amount of materials such as dried Powdered krill, $\alpha-starch$, sweet potato starch, sugar, salt, monosodium glutamate, glycine, potassium tartarate, ammonium bicarbonate, and sodium bicarbonate in processing krill snack, sample B(containing $7.7\%$ of dried powdered krill) and sampleC (containing $10.8\%$ of dried powdered krill) showed the most palatable taste from the view point of organoleptic test. Sweet potato starch in testing side materials was good in the comparison of suitability for processing krill snack. Corn starch and kudzu starch were slightly inferior to sweet potato starch, while wheat flour was not proper for processing the snack. In the experiment on frying method, oil frying showed better effect than salt frying and the suitable range of frying temperature was $210-215^{\circ}C$.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.1
• /
• pp.53-59
• /
• 2013

Since 1990s, the major recycling methods for mechanical recycling of FRP(Fiber Reinforced Plastics)boats has involved shredding and grinding of the scrap FRP in a new recycled product. But still it leads to secondary problem such as air pollution, unacceptable shredding noise level and few limited applications. This study is to propose a newly advanced method which is more efficient and environment friendly waste FRP regenerating system. As extracting FRP layer and making the recycled fiber for recycled-fiber reinforced concrete(RFRC) from waste FRP, the recycling process has some merits in a sense of the recycling energy and the environmental effects. In this study, for those tasks, spectro-chemical differentiation method and coloring water-soluble dye treatment makes the roving layer more distinguishable photophysically. Also that has remarkably reduced safety hazards and energy. Using the mechanical properties of polymers and composite, FRP with the orthotropic and laminated plastic structure has been easily separated in the new extracting system. Also the new method has introduced five kind of separating manuals for the some different compositions of FRP boats. The roving fiber of laminated glass-fiber layer is as good as the polyvinyl fiber which is cost-high commercial fiber to increasing strength of concrete products. The early study has shown the effectiveness of laminated glass-fiber layer which also is chemical-resistant due to the resin coating. These results imply that more efficient and environment friendly recycled glass fiber can be better applied to the fiber reinforced concrete(FRC) substitute and this study also has shown wide concrete applications with RFRC from the waste FRP boat.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.119-133
• /
• 2012

Recent rise of social media channel is changing social and economic paradigm and is being used as an effective communication in marketing. The following research analyzes the most employed social marketing tools such as portal advertisement, blogs, and SNS channels to effectively execute social media marketing from performance indicator and ICSI perspective, analyzes each channel's characteristics and results based on Korea distribution companies' case studies and suggests a framework to effectively use each channel. Portal site advertisements are the most effective channel to draw customers with new information and are thus linked to profit by corporations with excessive budget and workforce. Blogs target a specific range of customers providing quality information and knowledge thus improving a corporation's and its product's trustworthiness, spread the word by allowing customers to scrap the information, form social groups and synthesize ideas, events, new contents and social involvement with loyal customers. SNS channels allow customers to get involved in real time information and events, grow through network by the power of customers, react immediately to customers' needs, and execute real-time market and customer reports. Though national corporations currently rely heavily on portal site advertisements, insightful marketing professionals are showing financial results with blog and SNS. In the future, based on a precise understanding of each channel's benefits and expected results, and with a focus on flexibility, timeliness and integrated use of each channel, a portfolio of dynamic marketing as a maximizing strategy could be synthesized.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.2
• /
• pp.15-21
• /
• 2012

MTBE (Methyl tertiary-butyl ether) has been commonly used as an octane enhancer to replace tetraethyl lead in gasoline, because MTBE increases the efficiency of combustion and decreases the emission of carbon monoxide. However, MTBE has been found in groundwater from the fuel spills and leaks in the UST (Underground Storage Tank). Fenton's oxidation, an advanced oxidation catalyzed with ferrous iron, is successful in removing MTBE in groundwater. However, Fenton's oxidation requires the continuous addition of dissolved $Fe^{2+}$. Zero-valent iron is available as a source of catalytic ferrous iron of MFO (Modified Fenton's Oxidation) and has been studied for use in PRBs (Permeable Reactive Barriers) as a reactive material. Therefore, this study investigated the condition of optimization in MFO-PRBs using waste zero-valent iron (ZVI) with the waste steel scrap to treat MTBE contaminated groundwater. Batch tests were examined to find optimal molar ratio of MTBE : $H_2O_2$ on extent to degradation of MTBE in groundwater at pH 7 with 10% waste ZVI. As the results, the ratio of optimization of MTBE to hydrogen peroxide for MFO was determined to be 1:300[mM]. The column experiment was conducted to know applicability of MFO-PRBs for MTBE remediation in groundwater. As the results of column test, MTBE was removed 87% of the initial concentration during 120days of operational period. Interestingly, MTBE was degraded not only within waste ZVI column but also within sand column. It means the aquifer may affect continuously the MTBE contaminated groundwater after throughout the waste ZVI barrier. The residual products showed acetone, TBF (Tert-butyl formate) and TBA (Tert-butyl acetate) during this test. The results of the present study showed that the recycled materials can be effectively used for not only a source of catalytic ferrous iron but also a reactive material of the MFO-PRBs to remove MTBE in groundwater.