• Journal of Animal Environmental Science
• /
• v.13 no.1
• /
• pp.21-28
• /
• 2007

This experiment was conducted to determine the effect of feed intake and water consumption on milk yield and manure production in milking cows. The average feed intake(dry matter) of milking cows were 19.5kg/hd/d. Spring(23.9kg) and fall(22.1kg) feed intake rates when higher than in the summer(17.0kg) and winter(15.3kg/hd/d). The average water consumption of milking cows were $77.2\ell/hd/d$. Summer showed the highest value$(85.5\ell/hd/d)$ and winter showed the lowest value$(62.2\ell/hd/d)$. The average milk yield during spring, summer, fall, and winter was 30.8, 24.0, 25.4, and 23.7kg/hd/d, respectively. Milk yield during spring was found to be statiscally greater than for the other seasons. Manure production of milking cows during spring, summer, fall, and winter was 64.4, 63.5, 60.4, and 51.0kg/hd/d, respectively. Consequently, a relatively high correlation between milk yield and water consumption$(R^2=0.7742)$, milk yield and feed intake$(R^2=0.7459)$, water, consumption and urine production$(R^2=0.7422)$, feed intake and feces production$(R^2=0.6044)$, and milk yield and feces production$(R^2=0.6920)$ were observed in milking cows. The other hand, correlation between water consumption and feces production$(R^2=0.2950)$, feed intake and urine production $(R^2=0.1985)$, and milk yield and urine production$(R^2=0.2335)$ were found to be relatively low. Therefore, correlation equation between milk yield and feed intake, milk yield and water consumption can be estimated from : $Y=0.1919X_1+11.181(R^2=0.7742),\;Y=0.8568X_2+9.3067(R^2=0.7459)$(Y=milk yield $X_1=water$ consumption, $X_2=feed$ intake).

• Journal of Wetlands Research
• /
• v.18 no.4
• /
• pp.394-403
• /
• 2016

This study was carried out to verify change and relationship between the concentration of chlorophyll-a and environmental factors including weather, water quality and discharge at before & after Gangcheon and Ipoh weir construction at Namhan river, based on the weather and water quality data provided by the measuring network. We classified the period of before & after weir construction by the cluster analysis with Ward's method, and also through the correlation analysis between the concentration of chlorophyll-a and environmental factors, the influence factors related with algae occurrence(Chlorophyll-a) were analyzed. The result by cluster analysis based on data of the total 12 factors (water temperature, rainfall, daylight, pH, DO, BOD, COD, T-N, $NH_3-N$, $NO_3-N$, T-P, $PO_4-P$) from 2005 to 2015 indicated a clear classification into two periods, before(2006-2007) & after (2012-2013) weir construction. After weir construction, class of BOD at Gangcheon weir was better than before, changed from II class to Ia class, and likewise class of BOD at Ipoh weir was improved from II-III class to Ia-IIclass. Also T-P and T-N concentration also were to be improved in general after weir construction. Concentraion of Chlorophyll-a afterGangcheon and Ipoh weir construction was to be decreased. However, frequency of algae warning was increased from 9 to 15 after Ipoh weir construction due to increasing of HRT and water temperature. After weirs construction, the result of correlation analysis between weather, water quality and discharge and concentration of chlorophyll-a indicated a positive correlation, order of BOD(0.579) > COD(0.413) > temperature(0.237), and a negative correlation, order of $NO_3-N$(-0.344) > T-N(-0.293) at Gangcheon weir. And there were likewise positive correlation, order of BOD(0.795) > pH(0.581) > Water temperature(0.422), and negative correlation, order of $NO_3-N$(-0.457) > T-N(-0.371) > $NH_3-N$(-0.326) > $PO_4-P$(-0.288) > Discharge(-0.213) after Ipoh weir construction. Although water quality after Ipoh weir construction was generally improved, increase of frequency of algae warning occurrence was influenced by change of water conditions such as reduction of the velocity, increase of HRT and water temperature, etc impacted strongly by change of the stream flow more than change of water environments after weir construction.

• Journal of Internet Computing and Services
• /
• v.16 no.2
• /
• pp.109-115
• /
• 2015

The new medical device technologies for bio-signal information and medical information which developed in various forms have been increasing. Information gathering techniques and the increasing of the bio-signal information device are being used as the main information of the medical service in everyday life. Hence, there is increasing in utilization of the various bio-signals, but it has a problem that does not account for security reasons. Furthermore, the medical image information and bio-signal of the patient in medical field is generated by the individual device, that make the situation cannot be managed and integrated. In order to solve that problem, in this paper we integrated the QR code signal associated with the medial image information including the finding of the doctor and the bio-signal information. bio-signal. System implementation environment for medical imaging devices and bio-signal acquisition was configured through bio-signal measurement, smart device and PC. For the ROI extraction of bio-signal and the receiving of image information that transfer from the medical equipment or bio-signal measurement, .NET Framework was used to operate the QR server module on Window Server 2008 operating system. The main function of the QR server module is to parse the DICOM file generated from the medical imaging device and extract the identified ROI information to store and manage in the database. Additionally, EMR, patient health information such as OCS, extracted ROI information needed for basic information and emergency situation is managed by QR code. QR code and ROI management and the bio-signal information file also store and manage depending on the size of receiving the bio-singnal information case with a PID (patient identification) to be used by the bio-signal device. If the receiving of information is not less than the maximum size to be converted into a QR code, the QR code and the URL information can access the bio-signal information through the server. Likewise, .Net Framework is installed to provide the information in the form of the QR code, so the client can check and find the relevant information through PC and android-based smart device. Finally, the existing medical imaging information, bio-signal information and the health information of the patient are integrated over the result of executing the application service in order to provide a medical information service which is suitable in medical field.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.2
• /
• pp.17-26
• /
• 2009

As the lifestyle of consumers changes and the need for various products increases, new products are being developed in the market. Each household owns various home appliances which are purchased through the choice of a decision maker. These appliances include not only large-sized products such as TV, refrigerator, and washing machine, but also small-sized products such as microwave oven and air cleaner. There exists latent correlation among possession of home appliances, even though they are purchased independently. The purpose of this research is to analyze the effect of demographic factors on the purchase and possession of each home appliances, and to derive some relationships among various appliances. To achieve this purpose, the present status on the possession of each home appliances are investigated through consumer survey data on the electric and energy product. And a multivariate probit(MVP) model is applied for the empirical analysis. From the estimation results, some appliances show a substitutive or complementary pattern as expected, while others which look apparently unrelated have correlation by co-incidence. This research has several advantages compared to previous literatures on home appliances. First, this research focuses on the various products which are purchased by each household, while previous researches such as Matsukawa and Ito(1998) and Yoon(2007) focus just on a particular product. Second, the methodology of this research can consider a choice process of each product and correlation among products simultaneously. Lastly, this research can analyze not only a substitutive or complementary relationship in the same category, but also the correlation among products in the different categories. As the data on the possession of home appliances in each household has a characteristic of multiple choice, not a single choice, a MVP model are used for the empirical analysis. A MVP model is derived from a random utility model, and has an advantage compared to a multinomial logit model in that correlation among error terms can be derive(Manchanda et al., 1999; Edwards and Allenby, 2003). It is assumed that the error term has a normal distribution with zero mean and variance-covariance matrix ${\Omega}$. Hence, the sign and value of correlation coefficients means the relationship between two alternatives(Manchanda et al., 1999). This research uses the data of 'TEMEP Household ICT/Energy Survey (THIES) 2008' which is conducted by Technology Management, Economics and Policy Program in Seoul National University. The empirical analysis of this research is accomplished in two steps. First, a MVP model with demographic variables is estimated to analyze the effect of the characteristics of household on the purchase of each home appliances. In this research, some variables such as education level, region, size of family, average income, type of house are considered. Second, a MVP model excluding demographic variables is estimated to analyze the correlation among each home appliances. According to the estimation results of variance-covariance matrix, each households tend to own some appliances such as washing machine-refrigerator-cleaner-microwave oven, and air conditioner-dish washer-washing machine and so on. On the other hand, several products such as analog braun tube TV-digital braun tube TV and desktop PC-portable PC show a substitutive pattern. Lastly, the correlation map of home appliances are derived using multi-dimensional scaling(MDS) method based on the result of variance-covariance matrix. This research can provide significant implications for the firm's marketing strategies such as bundling, pricing, display and so on. In addition, this research can provide significant information for the development of convergence products and related technologies. A convergence product can decrease its market uncertainty, if two products which consumers tend to purchase together are integrated into it. The results of this research are more meaningful because it is based on the possession status of each household through the survey data.

• Culinary science and hospitality research
• /
• v.21 no.1
• /
• pp.77-89
• /
• 2015

The objective of this study was to optimize processing conditions for the production of an instant puffed rice product using response surface methodology (RSM) and contour analysis. Sensory and texture qualities, and physical properties of the puffed rice were analyzed with various processing conditions related to drying and puffing temperature, and moisture content. Preference, color intensity, cohesiveness, rehydration ratio, density and lightness of the puffed rice product significantly varied depending on the processing conditions. The responses showed high $R^2$ values (0.623, 0.852, 0.735, 0.688, and 0.790) and lack-of-fit. Rehydration ratio was found to have a negative correlation with density in the condition of drying and puffing temperature. Lightness and preference scores of the puffed rice increased as the moisture content increased. According to RSM, the preference scores were very highly related to the moisture content, and the optimum processing conditions of the puffed rice product were at $40^{\circ}C$ of drying temperature, with 11.0% of moisture content, and at $232.7^{\circ}C$ of puffing temperature.

• Journal of Life Science
• /
• v.20 no.7
• /
• pp.1107-1112
• /
• 2010

In this study, the stable maintenance of bioactivity in alkaline ionized water (AIW) and antibacterial effects of AIW were evaluated to confirm benefits of AIW. As controls, purified water (PW) and tap drinking water (DW) were used. The pH and ORP (oxidation-reduction potential) of AIW, PW and DW used were 9.5 and 120 mV, 7.2 and 144 mV, and 7.3 and 564 mV, respectively. High level of minerals was observed in DW (DW>AIW>PW of mineral contents). Concentrations of $Ca^{++}$ and $Na^+$ in DW were 14.5, and 8.4 mg/l, respectively, while no $Ca^{++}$, $Mg^{++}$, $K^+$, and $Na^+$ were detected in PW. Evaluation of antioxidant activities for AIW, PW and DW showed that the waters did not act as antioxidants. However, the DPPH (1,1-diphenyl-2-picryl hydrazyl) or superoxide radical scavenging activities or reducing power of vitamin C were stably maintained in AIW and PW, though not in DW, against heat treatment ($60^{\circ}C$) or vigorous shaking (120 rpm) at $37^{\circ}C$. Similarly, after aspirin treatment at $60^{\circ}C$ for 1 hr, the antithrombosis activity in PW and AIW was 62.6% and 55.3%, while that of DW was 52.1%. Furthermore, cell growth analysis and viable cell count of Escherichia coli H7:O157 in PW, AIW and DW showed that AIW and DW, not DW, have antibacterial activities. Our results suggest that the state of water, for example pH, ORP and mineral contents of water, should be considered in medicine or food industries, and that AIW has high potential for utilization in various fields.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.3
• /
• pp.380-391
• /
• 2015

Objectives: The objective of this study is to assess airborne particulate matter pollution and its effect on health of residents living near Ansim Briquette Fuel Complex and its vicinities. Also, this study measured and analyzed the concentration of TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals which influences on the environmental and respiratory disease in Ansim Briquette Fuel Complex, Daegu, Korea. Methods: In this study, we analyzed various environmental pollutants such as particulate matter and heavy metals from Ansim Briquette Fuel Complex that adversely affected local residents's health. In particular, we verified the concentration distribution and characteristics of exposure for TSP, $PM_{10}$, and $PM_{2.5}$ among particulate matters, and heavy metals(Cd, Cr, Cu, Mn, Ni, Pb, Fe, Zn, and Mg). In that regard, the official test method on air pollution in Korea for analysis of particulate matter and heavy metal in atmosphere were conducted. The large capacity air sampling method by the official test method on air pollution in Korea were applied for sampling of heavy metals in atmosphere. In addition, we evaluated the concentration of seasonal environmental pollutants for each point of residence in Ansim Briquette Fuel Complex and surrounding area. The sampling measured periods for air pollutants were from August 11, 2013 to February 21, 2014. Furthermore, we measured and analyzed the seasonal concentrations(summer, autumn and winter). Results: The average concentration for TSP, $PM_{10}$, and $PM_{2.5}$ by direct influence area at Ansim Briquette Fuel Complex were 1.7, 1.4 and 1.9 times higher than reference region. In analysis results of seasonal concentrations for particulate matter in four direct influence and reference area, concentration levels for winter were generally somewhat higher than concentrations for summer and autumn. The average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were $0.0008{\pm}0.0004{\mu}g/Sm^3$, $0.0141{\pm}0.0163{\mu}g/Sm^3$, $0.0248{\pm}0.0059{\mu}g/Sm^3$, $0.0026{\pm}0.0011{\mu}g/Sm^3$, $0.0272{\pm}0.0084{\mu}g/Sm^3$, $0.4855{\pm}0.1862{\mu}g/Sm^3$, and $0.3068{\pm}0.0631{\mu}g/Sm^3$, respectively. In particularly, the average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were 1.9, 3.6, 2.1, 1.9, 1.4, 2.6, and 1.2 times higher than reference area, respectively. The continuous monitoring and management were required for some heavy metals such as Cr and Ni. Moreover, the average concentration in winter for particulate matter in direct influence area at Ansim Briquette Fuel Complex were generally higher than concentrations in summer and autumn. Also, average concentrations for TSP, $PM_{10}$, and $PM_{2.5}$ were from 1.5 to 2.0 times, 1.2 to 1.8 times, and 1.1 to 2.3 times higher than reference area, respectively. In results for seasonal atmospheric environment, TSP, $PM_{10}$, $PM_{2.5}$, and heavy metal concentrations in direct influence area were higher than reference area. Especially, the concentrations in C station were a high level in comparison with other area. Conclusions: In the results, some particulate matters and heavy metals were relatively high concentration, in order to understand the environmental pollution level and health effect in surrounding area at Ansim Briquette Fuel Complex. The concentration of some heavy metals emitted from direct influence area at Ansim Briquette Fuel Complex were relatively higher than reference area. In particular, average concentration for heavy metals in this study were higher than average concentrations in air quality monitoring station for heavy metal for 7 years in Deagu metropolitan region. Especially, the residents near Ansim Briquette Fuel Complex may be exposed to the pollutants(TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals, etc) emitted from the factories in Ansim Briquette Fuel Complex.

• Journal of Environmental Impact Assessment
• /
• v.26 no.6
• /
• pp.470-478
• /
• 2017

This study was classified into two groups, normal season group and drought season group, by the cluster analysis using the weather and water quality data from 2012 to 2015, using SPSS 18 version. Also each cluster was classified into three spaces, Gangcheon, Yeoju and Ipoh weir. We performed the multiple regression analysis with each monthly data that concentration of Chl-a was more than algae warming level. 6 groups classified in time and space were analyzed by the correlation analysis between concentration of Chl-a and 3 weather, 11 water quality and discharge factors. We developed Chl-a prediction equations of each group with independent variables of the multiple regression analysis applying to the correlation result. The result of cluster analysis was that the period was divided into two groups, normal group(2012-2013) that total annual precipitation rate was normal and drought group(2014-2015) that total annual precipitation rate was less than 1,000 mm/hr, in time. The months that concentration of Chl-a was more than algae warming level in each group classified by cluster analysis were that the normal group was 3~8 and drought group was 3 and 6~10. The correlation result between Chl-a and weather, water quality and discharge factors for each 6 group was that relationships between Chl-a and water, discharge factors were high in the drought group more than in normal group at all weirs. This was influenced by velocity reduction and increasing HRT according to the intense drought. Weather, water quality and discharge factors that were high correlation with Chl-a were applied to independent variables of Chl-a prediction equations and each equations were developed. Among them, Each adjusted R square of Prediction equations for Chl-a in each group at Ipoh weir where is located in Namhan river downstream and is directly connected to Paldang dam were normal group = 0.920 and drought group = 0.818. It's showed the high linear.

• Science of Emotion and Sensibility
• /
• v.19 no.2
• /
• pp.101-112
• /
• 2016

Selecting appropriate materials can be significantly important to make different image in the product and also give distinguished express to the users. A material for the ceramic product surface consists of the combination between a glaze and a body, and each attribution of materials and the way of the combination creates different texture and color. This study analyzes the difference between visually and tactually sensibility of ceramic surface to through the simulating both visual and tactual stimulation by verbal evaluation method. Totally 13 adjectives are selected from homepage of local and global ceramic product brand. And totally 12 ceramic samples are created with the consideration of color, glossiness and roughness. These 12 samples are the combination between four ceramic bodies (White porcelain, Celadon_c, Sancheong and Black soil) and three glazes (Transparent, Celadon_g, Black glaze). The respondents of first survey were asked to rub, touch and hold before evaluating the sensibility of ceramic surface and other respondents of second survey were asked to evaluate visual images of 9 samples which showed meaningfully difference from first survey. The surface which scored the highest sensibility with the first survey was 'pure' on a surface of White porcelain body with Transparent glaze, and the lowest was also 'pure' on a surface of Black soil body with Transparent glaze. The highest score in the second survey was the same result as the first survey, but the lowest scored 'casual' and the surface was Black soil body with Celadon glaze. By the comparison with two survey results, not every sensibility is same result shown as the first survey and the second survey, but the tactile sensibilities such as 'artistic', 'luxurious', 'sensuous', 'romantic' and 'mysterious' can be experienced by via visual materials of ceramic surfaces.

• Korean Journal of Food Science and Technology
• /
• v.50 no.4
• /
• pp.383-390
• /
• 2018

Most neurodegenerative diseases are known to be influenced by oxidative stress. We investigated the anti-oxidative activity of the concentrate of fermented wild ginseng root culture (HLJG0701) containing ginsenosides Rg5 and Rk1. HLJG0701 showed effective DPPH and ABTS radical scavenging ability ($IC_{50}$: 16- and 4-fold dilution, respectively) and was inhibited dose-dependently by the $FeSO_4$-induced lipid peroxidation group (8- and 4-fold dilution: 2.3 and 1.5 nM, respectively). In MTT and LDH assays, 8-, 16-, 32- and 64-fold diluted HLJG0701 significantly increased cell viability by 70, 53, 35, and 26%, respectively. LDH released by HLJG0701 was reduced 1.3-fold with 8-fold diluted HLJG0701 compared to the $H_2O_2$-treated control. In addition, the inhibitory effect of HLJG0701 on oxidative stress in PC12 cells was confirmed by DCF-DA analysis (16-, 4-fold diluted HLJG0701: 50 and 68% ROS inhibition, respectively), TBARS (16- and 4-fold diluted HLJG0701: 50.7 and 46.5% inhibition, respectively), GPx (16- and 4-fold diluted HLJG0701: 133.3 and 227.3% release, respectively), and SOD analysis (16- and 4-fold diluted HLJG0701: 118.2 and 218.2% release, respectively). These results suggested that HLJG0701 protects neuronal cells by its anti-oxidative effects and hence can be a potential preventive material against neurodegenerative diseases.