Transactions on Electrical and Electronic Materials
/
v.12
no.3
/
pp.106-109
/
2011
We investigated the etching characteristics of titanium nitride (TiN) thin film in $BCl_3$/Ar inductively coupled plasma. The etching parameters were the gas mixing ratio, radio frequency (RF) power, direct current (DC)-bias voltages and process pressures. The standard conditions were as follows: total flow rate = 20 sccm, RF power = 500 W, DC-bias voltage = -100 V, substrate temperature = $40^{\circ}C$, and process pressure = 15 mTorr. The maximum etch rate of TiN thin film and the selectivity of TiN to $Al_2O_3$ thin film were 54 nm/min and 0.79. The results of X-ray photoelectron spectroscopy showed no accumulation of etch byproducts from the etched surface of TiN thin film. The TiN film etch was dominated by the chemical etching with assistance by Ar sputtering in reactive ion etching mechanism, based on the experimental results.
Kim, Gwan-Ha;Kim, Kyoung-Tae;Kim, Jong-Gyu;Woo, Jong-Chang;Kang, Chan-Min;Kim, Chang-Il
The Transactions of The Korean Institute of Electrical Engineers
/
v.56
no.2
/
pp.349-354
/
2007
In this work, we investigated etching characteristics of $HfO_2$ thin film and Si using inductive coupled plasma(ICP) system. The ion energy distribution functions in an ICP system was analyzed by quadrupole mass spectrometer(QMS) with an electrostatic ion energy analyzer. The maximum etch rate of $HfO_2$ thin film is 85.5 nm/min at a $BCl_3/(BCl_3+Ar)$ of 20 % and decreased with further addition of $BCl_3$ gas. From the QMS measurements, the most dominant positive ion energy distributions(IEDS) showed a maximum at 20 % of $BCl_3$. These tendency was very similar to the etch characteristics. This result agreed with the universal energy dependency of ion enhanced chemical etching yields. And the maximum selectivity of $HfO_2$ over Si is 3.05 at a $O_2$ addition of 2 sccm into the $BCl_3/(BCl_3+Ar)$ of 20 % plasma.
Kim, Gi-Taek;Lee, Seung-Hun;Gang, Yong-Jin;Kim, Jong-Guk
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.216.1-216.1
/
2014
Closed drift ion source는 그 특성으로 인하여 강판 표면처리, 금속 표면 산화막 형성, 폴리머 혹은 기타 표면 개질 등 다양한 분야에서 사용이 되고 있다. 다양한 환경에서 사용 되는 소스의 특성으로 인하여 각기 다른 공정에 대한 최적의 특성이 요구 되며, 이러한 공정 환경에 맞춘 소스를 설계하기 위해서 ion source내 전극의 구조 및 자기장 세기 등 이온소스의 구조적 특성에 대한 연구가 필요하게 된다. 본 연구에서는 선형 이온소스의 구조 설계를 위한 실험을 소형(이온빔 인출 슬릿 직경: 60 mm) 이온빔 인출 장치를 제작하여 전극 구조에 따른 방전 특성을 우선적으로 평가를 실시하여 소형 이온빔 인출 장치에서 도출된 결과를 바탕으로 0.3 m급 linear closed drift ion source 설계에 대한 변수를 조사 하였다. 실험은 양극-음극(C-A) 간 간격 및 음극 슬릿(C-C) 간격 그리고 자기장 세기 조건에서 방전 전류 및 인출 이온빔 전류량 측정하였으며, 이 결과를 전산모사 결과와 비교 하였다. 방전전압 1~5 kV, 가스유량 10~50 sccm 조건에서 Ar 이온빔 방전 특성을 평가한 결과, 양극-음극(C-A) 간격이 넓을수록, 음극-음극(C-C) 간격이 좁을수록 방전 전류량이 증가함을 확인 하였다. 또한, 공정 가스 압력 및 자기장 세기 변화에 따른 1~5 kV의 방전 전압에 대한 방전 특성의 관찰 결과, 압력 및 자기장 변화에 따라서 방전 전류의 변화를 관찰 할 수 있었으며, 이에 대한 결과를 통하여 이온 소스 구조 내부에서의 방전 영역에 대한 압력과 자기장 세기에 대한 영향을 분석 할 수 있었다.
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.247.2-247.2
/
2014
플라즈마 전파 속도와 전자 온도를 조사하기 위해 ICCD카메라(Intensified Charge-Coupled Device Camera, 이하 ICCD)를 이용하여 대기압 저온 플라즈마제트의 방전 이미지를 촬영하였다. 사용된 플라즈마 제트 장치는 유리관 안에 주사기 바늘형 전극이 들어있는 형태이다. 전극의 내경은 1.3 mm, 외경은 1.8 mm, 총 길이는 39.0 mm이며 재질은 스테인레스강이다. 유리관의 내경은 2.0 mm, 외경은 2.4 mm, 총 길이는 80.0 mm이다. 입력 전압은 3.0 kV이며 구동 주파수는 40 kHz이다. 아르곤과 질소의 혼합가스 비율은 각각 100:1, 98:2, 95:5을 사용하였으며 총 가스유량은 400 sccm이다. 각각의 비율별로 군속도는 267 km/s, 305 km/s, 313 km/s이며 이온 음향 속도는 1.16 km/s, 1.24 km/s, 1.25 km/s이고, 전자 온도는 0.55 eV, 0.63 eV, 0.65 eV로 관찰되었다.
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.338.1-338.1
/
2014
비정질 산화물 반도체(Amorphous Oxide Smeiconcuctor)를 이용하여 투명 박막 트랜지스터의 채널층으로 많은 연구가 진행되고 있다. 투명 박막 트랜지스터의 채널층으로 사용되고 있는 IGZO박막은 비정질임에도 불구하고 높은 이동도와 넓은 밴드갭을 갖고 있는 것으로 알려져 있다. 본 연구는 RF magnetron sputtering법으로 유리기판 위에 IGZO박막을 증착시켰으며 소결된 타겟으로는 In:Ga:ZnO를 각각 1:1:2mol%의 조성비로 혼합하여 이용하였으며, $30{\times}30mm$의 XG Glass 유리기판에 sputtering 방식으로 증착하였다. 박막 증착 조건은 초기압력 $3.0{\times}10^{-6}Torr$, 증착 압력 20mTorr, 반응가스 Ar 25sccm, 공정 변수로는 RF Power 25W, 50W, 75W, 100W 각각 변화를 주어 실험을 진행 하였으며, 증착온도는 실온으로 고정 하였다. 분석 결과로 RF Power 25W 일 때 XRD 분석결과 Bragg's 법칙을 만족하는 피크가 나타나지 않는 비정질 구조임을 확인하였으며, AFM 분석결과 0.5 mm 이하의 Roughness를 가졌다. UV-Visible-NIR 측정 결과 가시광선 영역에서 87%이상의 투과도를 나타냈으며, Hall 측정 결과 Carrier concentration $3.31{\times}10^{19}$, Mobility $10.9cm^2/V.s$, Resistivity $1.8{\times}10^{-2}$, 투명 박막 트랜지스터의 채널층으로 사용 가능함을 확인 할 수 있었다.
Park, Myeong-Jun;Kim, Seong-Jun;Kim, Su-In;Lee, Chang-U
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.354.2-354.2
/
2014
최근 반도체 산업의 발전에 따라 반도체 소자 내 배선재료로 사용되던 Aluminium (Al)의 대체물로 Copper (Cu)가 사용되고 있다. Cu는 Al보다 우수한 전도성과 비용이 저렴하다는 장점이 있으나 반도체 기판과의 확산으로 이를 해결해야만 하는 문제점이 있다. 이는 Si와 Cu사이에 확산방지막을 사용하여 해결할 수 있는데 Hafnium Nitride (HfN) 박막은 다른 물질과 비교해 고온에서의 안정성과 낮은 비저항을 가지고 있어 주목을 받고 있다. 본 연구에서는 rf magnetron sputter 방법으로 박막 증착 시에 인가하는 rf power가 박막의 표면 특성에 어떠한 영향을 미치는지 nano-indenter를 사용해 surface hardness와 elastic modulus의 변화를 중심으로 알아보았다. 시료는 rf magnetron sputter로 증착 시 인가하는 plasma power를 60W와 80W로 달리하여 증착하였다. 증착가스는 Ar과 $N_2$를 조절하여 사용하였고 총 유량을 40 sccm 으로 고정하였으며, 이 때 압력은 3mTorr로 유지하였다. 실험결과 plasma power를 80W로 인가하여 증착한 시료의 surface hardness (18.48 GPa)가 60W로 증착한 시료의 surface hardness (12.03 GPa)보다 큰 값을 나타내었다. 이와 마찬가지로 80W로 증착한 시료의 elastic modulus(187.16 GPa)도 60W로 증착한 시료의 탄성계수 (141.15 GPa)보다 큰 값을 나타내었다. 이는 증착 시 인가하는 plasma power의 크기가 증가하면 박막표면에 compressive stress가 생성되어 박막의 surface hardness와 elastic modulus가 상대적으로 높게 측정되는 것으로 생각된다.
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.230.2-230.2
/
2014
스퍼터링 공정은 보통 수백 eV로 가속된 이온에 의한 고체 타겟으로부터 입자의 방출로서 정의할 수 있다. 스퍼터된 입자는 열에너지보다 운동에너지가 크며 박막성장은 저에너지의 입자충격, 불활성 가스이온, 타겟부터 산란된 입자에 의하여 지배된다. 본 연구는 직경 2인치의 원형 Cr 타겟을 셔터를 닫고 예비 스퍼터링 할 때 셔터(SUS 304 0.1t)가 전자기력을 받아서 기계적으로 진동하는 현상을 규명하고자 하였다. 셔터의 하단부를 챔버의 중심축에 고정시켜서 타겟과 평행하도록 수 cm 떨어뜨려서 위치한 뒤 직류 마그네트론 플라즈마를 발생시켰을 때 DC power에 따라서 각각 움직임을 동영상촬영을 진행하였고, 셔터의 중심을 실로 매달아서 자유롭게 움직일 수 있도록 한 뒤 플라즈마가 발생했을 때 기계적인 움직임을 중점적으로 관찰했다. 움직임의 차이를 비교하기 위해서 셔터의 크기를 줄여가며 일정한 DC power에서 실험을 진행했고, 자세한 관찰을 위해서 초고속카메라(210 fps)로 짧은 순간의 변화를 비교했다. 실험조건은 5, 10 mTorr, DC power 30, 40, 50, 70, 100 W, Ar 30 sccm, 셔터의 크기 10, 20, 30, 40, 50, 60 mm로 실시했다. 압력이 낮아질수록, 셔터의 크기가 작을수록, DC power가 커질수록 움직임변화가 커졌고, 진동수가 빨라지는 것을 확인했다. F=qE=ma를 통해서 실험에서 촬영한 동영상을 근거로 거리측정을 통해 실험에서 얼마의 전기장이 인가되어 있는지 예측하였다.
Park, Ju-Yeong;Im, Yu-Bong;Kim, Ho-Rak;Kim, Jong-Guk;Lee, Seung-Hun;Choe, Won-Ho
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.226.1-226.1
/
2014
이온빔 소스는 반도체 및 디스플레이 공정에 있어, 표면 에칭 및 증착 등 여러 응용 분야에 활발히 이용되고 있다. 본 연구에 사용된 원형 이온빔 소스는 선형 이온빔 소스의 가장자리에서의 특성 분석을 위해 제작되었으며, 높은 직류전압과 자기장 공간에서 플라즈마를 방전시키고 발생된 이온들을 가속시켜 높은 에너지의 이온빔을 발생시킨다. 이온빔 특성 분석을 위해 전위지연 탐침과 패러데이 탐침을 개발하였다. 전위지연 탐침은 격자판에 전압을 인가하여 선택적으로 이온을 수집하고, 이온의 에너지분포함수를 측정한다. 패러데이 탐침은 이온 수집기와 가드링으로 구성되어 수집기 표면에 일정한 플라즈마 쉬스를 형성하여 정확한 이온전류밀도를 측정한다. 본 연구에서는, 아르곤 기체를 이용하여 기체유량(8~12 sccm) 및 방전전압(1~2 kV)에 따라 방전전류 16~54 mA, 소모전력 16~108 mW의 특성을 보였다. 운전압력은 0.4~0.54 mTorr이며, 이온소스로부터 18 cm 거리에서 이온전류밀도와 이온에너지분포를 측정하였다. 또한, 중공음극선을 이용하여 인위적으로 전자를 이온 소스에서 발생된 플라즈마에 공급하고 이온빔 및 플라즈마의 특성 변화를 위 시스템에서 분석하였다.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2001.11b
/
pp.533-536
/
2001
Single crystal cubic silicon carbide(3C-SiC) thin film were deposited on Si(100) substrate up to a thickness of $4.3{\mu}m$ by APCVD(atmospheric pressure chemical vapor deposition) method using hexamethyildisilane(HMDS) at $1350^{\circ}C$. The HMDS flow rate was 0.5 sccm and the carrier gas flow rate was 2.5 slm. The HMDS flow rate was important to get a mirror-like. The growth rate of the 3C-SiC films was $4.3{\mu}m/hr$. The 3C-SiC epitaxical layers on Si(100) were characterized by XRD(X-ray diffraction), raman scattering and RHEED(reflection high-energy electron diffraction), respectively. The 3C-SiC distinct phonons of TO(transverse optical) near $796cm^{-1}$ and LO(longitudinal optical) near $974{\pm}1cm^{-1}$ were recorded by raman scattering measurement. The deposition films were identified as the single crystal 3C-SiC phase by XRD spectra($2{\theta}=41.5^{\circ}$). Also, with increase of films thickness, RHEED patterns gradually changed from a spot pattern to a streak pattern.
Journal of the Korean Institute of Electrical and Electronic Material Engineers
/
v.17
no.5
/
pp.515-520
/
2004
We report on the development of a Piezoelectric valvc that is designed to have a high reliability for fluid control systems, such as mass flow control, transportation and chemical analysis. The valve was fabricated using a MCA(multilayer ceramic actuator), which has a low consumption power, high resolution and accurate control. The fabricated valve is composed of MCA, a valve actuator die and an seat die. The design of the actuator dic was done by FEM(finite element method) modeling, respectively. And, the valve seat die with 6 trenches was made. and the actuator die, which possible to optimize control to MCA, was fabricated. After Si-wafer direct bonding between the seat die and the actuator die, MCA was also anodic bonded to the scat/actuator die structure. PDMS(poly dimethylsiloxane) sealing pad was fabricated to minimize a leak-rate. It was also bonded to scat die and stainless steel package. The flow rate was 9.13 sccm at a supplied voltage of 100 V with a 50 % duty ratio and non-linearity was 2.24 % FS. From these results, the fabricated MCA valve is suitable for a variety of flow control equipments, a medical bio-system, semiconductor fabrication process, automobile and air transportation industry with low cost, batch recess and mass production.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.