• Journal of Hospice and Palliative Care
• /
• 제19권2호
• /
• pp.109-118
• /
• 2016

The purpose of this study was to evaluate Korean advance directives (K-AD) by examining the degree of adults' acceptance and reliability of the directive itself. Methods: Survey was performed with 181 adults aged 20 or older who were recruited from three regions. A questionnaire used to examine the participants' acceptance of their K-AD in terms of visual analogue scale score of complexity, difficulty, necessity, satisfaction, recommendation. Then, a retest was carried out by asking participants to write up a K-AD again to confirm the reliability of the directives. Results: On a scale of 100, the average acceptance score was 70 or above, which represents rather high level of acceptance in all five categories. The test-retest reliability kappa values ranged from 0.592 to 0.950, and the conformity degree was moderate or high. Regarding K-AD components such as values, treatment preference, proxy appointment, differences among age groups were observed in each component. Conclusion: The results of this study suggest that K-AD is a feasible instrument to analyze its acceptability and reliability for adult population. K-AD could be utilized to help people make their own decision on their end-of-life care. Further studies are needed to confirm this study results and promote widespread use of K-AD.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제18권1호
• /
• pp.31-41
• /
• 2020

We studied the anisotropic shrinkage and deformation characteristics of large size sintered bodies in the manufacturing of glass-ceramic composite wasteform. We used uranium-bearing waste, generated from the treatment of spent uranium catalyst. Sintered specimens were prepared in several forms, comprising a circular disk, and a quarter disk in several diameters of up to 40 cm. Regardless of form or size, the sintered bodies had high isotropic shrinkage when they were fabricated using green bodies prepared at 60 MPa. The average anisotropy rate and average shrinkage rate were 1.6%, and 37.4%, respectively. We confirmed that the glass-ceramic composite wasteform in a large scale disk-type for packing in a 200 L drum could be fabricated with a tolerable anisotropy shrinkage. This has resulted in a significant reduction in the volume of radioactive waste to be disposed of with highly stable wasteform.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제12권1호
• /
• pp.7-17
• /
• 2014

Molten salt electrorefining process achieves uranium deposits at cathode using an electrochemical processing of spent nuclear fuel. In order to recover pure uranium from cathode deposit containing about 30wt% salt, the adhered salt should be removed by cathode process (CP). The CP has been regarded as one of the bottle-neck of the pyroprocess as the large amount of uranium is treated in this step and the operation parameters are crucial to determine the final purity of the product. Currently, related research activities are mainly based on experiments consequently it is hard to observe processing variables such as temperature, pressure and salt gas behavior during the operation of the cathode process. Hence, in this study operation procedure of cathode process is numerically described by using appropriate mathematical model. The key parameters of this research are the amount of evaporation at the distillation part, diffusion coefficient of gas phase salt in cathode processor and phase change rate at condensation part. Each of these conditions were composed by Hertz-Langmuir equation, Chapman-Enskog theory, and interphase mass flow application in ANSYS-CFX. And physical properties of salt were taken from the data base in HSC Chemistry. In this study, calculation results on the salt gas behavior and optimal operating condition are discussed. The numerical analysis results could be used to closely understand the physical phenomenon during CP and for further scale up to commercial level.

• Journal of radiological science and technology
• /
• 제11권2호
• /
• pp.27-64
• /
• 1988

Most hospital administrators in our country have doubted whether or not the size of their hospital personnel staffs, and the personnel management styles implemented are efficient or not. Actually, increased personnel expenditures due to sophisticated specialization of medical practices has become the biggest hospital expense. Therefore, it is said that hospitals can be run move efficiently by implementing reasonable management strategies for hospital personnel management. In this paper, the departments of diagnostic radiography in 16 general hospitals in Seoul, which were classified into 4 groups by the scale of hospital beds, were used as sample cases. Then, the data for the number of X-ray examination by diagnostic item was collected from sample hospitals. The unit hour spent on X-ray examinations in each diagnostic service was quoted from "A Study on setting-up of the relative value units of medical services and on the structure of current fee schedules" written by Mr. Ik Je Seong. The data analysis results are as follows; First, the number of hours per day spent on X-ray examinations in 13 hospitals out of 16 hospitals, was shorter than the general daily working hours (8 hours). Second, in the morning there was not enough time to work for X-ray examinations required, with the available manpower. In the afternoon, however, the situation was diametrically opposed to that in the morning. Third, in light of above results, though most hospitals employ sufficient personnel for the quantity of the actural work, they were always short-handed where their works were performed Fourth, this study tells us that there is a maldistribution of the work in the schedule : too much work for the available personnel in the morning. The following recommendations are resulted from the data analysis described above. First, it is recommended that all out-patients coming again, except specific patients(G. B. or I.V.P. etc) who have to have their X-ray examinations on an empty stomach in the morning among out-patients, be required to visit the hospital in the afternoon. Second, it is recommended that all new out-patients be required to make a reservation in order to equalize the number of patients throughout the day. Third, it is recommended that all in-patients, except specified patients, be arranged to have their X-ray examinations in the afternoon. Fourth, it is recommended that part time workers be employed during peak hours. This recommendation, if applied in a wider scale, would allow hospitals to overcome the problem of the maldistribution of work and personnel, and then more efficient hospital management through the appropirate personnel management procedures could be expected.

• FLOWER RESEARCH JOURNAL
• /
• 제16권3호
• /
• pp.211-217
• /
• 2008

To build up data for mutation breeding of lily, sensitivity to irradiation of bulb, seed and pollen was investigated. The bulbs of seven cultivars including 'New Wave' were very sensitive to gamma rays. Non-irradiated bulbs produced plants with bloom as normal. However, irradiated bulbs showed retarded growth and did not flower. Bulbs of 'New Wave' and 'Tiny Dino' irradiated with 125Gy gamma rays survived, but their growth rate dropped considerably. Part or whole leaves of the other cultivars except 'New Wave' and 'Tiny Dino' withered. Moisture content of individual scale was 72~78% depending on cultivar. Bulblet formation from untreated scales was 100%. Among all irradiated scales only 'Siberia' scales showed 8.5% bulblet formation when irradiated with 50Gy gamma rays. Pollen germination as affected by gamma ray irradiation had no consistent tendency. When dosage of $F_1$ 'Augusta' seeds reached 300Gy, their survival ratio was drastically decreased. Bulblet formation in vitro was observed only in non-irradiated seeds. Lethal dose ($LD_{50}$) of seed was less than 100Gy. Height and width of $F_1$ 'Augusta' bulblets in vitro irradiated with gamma rays decreased as dosage increased regardless of the culture method. The percentage shoot formation was 100% in non-irradiated bulblets and 15~60% in irradiated ones.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• 제27권2호
• /
• pp.82-96
• /
• 2018

3D printing is a process of producing 3d object from a digital file in STL format by joining, bonding, sintering or polymerizing small volume elements by layer. The various type of 3d printing is classified according to the additive manufacturing strategies. Among the types of 3D printer, SLA(StereoLithography Apparatus) and DLP(Digital Light Processing) 3D printer which use polymerization by light source are widely used in dental office. In the previous study, a full-arch scale 3d printed model is less precise than a conventional stone model. However, in scale of quadrant arch, a 3d printed model is significantly precise than a five-axis milled model. Using $3^{rd}$ Party dental CAD program, full denture, provisional crowns and diagnostic wax-up model are fabricated by 3d printer in dental office. In Orthodontics, based on virtual setup model, indirect bracket bonding tray can be generated by 3d printer. And thermoforming clear aligner can be fabricated on the 3d printed model. 3D printed individual drilling guide enable the clinician to place the dental implant on the proper position. The development of layer additive technology enhance the quality of 3d printing object and shorten the operating time of 3D printing. In the near future, traditional dental laboratory process such as casting, denture curing will be replaced by digital 3D printing.

• Journal of the Korean Geotechnical Society
• /
• 제26권10호
• /
• pp.61-68
• /
• 2010

A pilot-scale model test was performed to estimate the availability of new material, Fe-loaded zeolite, as the filling material in permeable reactive barrier (PRB) against the contaminated groundwater with both Cd and Cr(VI). Aquifer was simulated by filling up a large scale soil tank with sands, and mobilizing the water flow by the head difference of water level in both ends of the tank. Then, the mixture of concentrated Cd and Cr(VI) solution was injected into the aquifer to form a contaminant plume, and its behavior through Fe-loaded zeolite barrier was monitored. The test results showed that Fe-loaded zeolite barrier successfully treated the contaminant plume containing both Cd and Cr(VI) and that the immobilized contaminants in the barrier were not desorbed or released. The results indicated that the Fe-loaded zeolite could be a promising material in PRBs against the multiple contaminants with different ionic forms like Cr(VI) and Cd.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제35권2호
• /
• pp.93-101
• /
• 1999

A simple experimental method was used in an attempt to realize the elevation of the fishing ability of purse seine in the sea area of Cheju Island, the changes of seine volume and tension in the purseline during pursing. Experiments carried out on the six types simplified reduced model seines which were made of knotless nettings. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two-ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cmfor seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. These model purse seines were made of the scale of 1/200 of its full scale, a 120 ton in the near sea of Cheju Island. Designing and testing for the model purse seines were based on the Tauti's law. Experiments were measured in the observation channel of a flume tank at the static conditions set up shooting and pursing equipments. Motion of purse seine during purse line was recorded by the two sets video camera for VTR which were placed in top and front of the model seine. The reading coordinate of seine volume carried out by the video digitization system, disk data for the purseline tension. An analysis were performed on the changes seine volume and tension in the purseline during pursing. The results obtained were as follows: 1. The seine volume during pursing was largest for Ⅵ seine with smallest d/l followed by V, IV, III, II and I seines, and tension in the purseline was small. 2. Seine volume during pursing can be expressed by the following equation; CVt=l-EXP[｛2.79 (d/l）＋0.35｝t-33.37 (d/l) ＋ 0.57] Where CVt is volume ratio, d is twine diameter, l is leg length and t is pursing time (sec). 3. Tension in the purse line during pursing can be expressed by the following equation; T= 1- EXP ｛0.57t ＋ 13.36 (d/l)+2.97｝ Where T is tension (kg) in the purseline during pursing.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• 제33권4호
• /
• pp.112-128
• /
• 2015

To consider an identity about traditional folk village, this study analyzes color characteristic of traditional folk village by targeting Cuandixia folk village in China. For method of study, color is analyzed by KSCA(Korea Standard Color Analysis) program and images of color are drawn by I.R.I. Based on these, four results are came out. First, color distribution of Cuandixia is appeared in YR, R, Y, GY order. Furthermore, there are no affiliation of BG, and B but a lot of affiliation of YR. Second, the whole is made up of color that is applied to mist gray/low chroma in the value and chroma stakes. Especially, high chroma is extracted by only commercial old house, the rest is made up of middle and low chroma color. Third, dark color is the most by KS Color System and dark reddish gray and medium gray are occupied most part. Fourth, the whole atmosphere of village is static and hard, and the image is researched as gentle. Through the research, It applies extracted color palette for plan and preservation of traditional folk village. As using the color that is reflected in national and local distinct characteristic, preserving the color reflected in history and culture of the village, and applying color planning considered harmony with surrounding environment, it is expected that it can help to direct the color involved traditional and cultural meaning.

• Journal of the Economic Geographical Society of Korea
• /
• 제19권4호
• /
• pp.597-615
• /
• 2016

Since 1997 the United Kingdom has pursued creative industry and creative city development in accordance with the New Labor Party policy, strengthening its cluster policy by assigning creative city policies to traditional manufacturing-oriented regions. Tech City in London, one of the most successful examples of digital clusters, is an area in which diverse ecosystems for venture business integration have been established, as the once barren space began to spontaneously develop. For this region, systematic linkages including universities, private companies, start-ups, and accelerators have been added, along with the UK government's active support system. As a result of this opportunity, the scale of the UK start-up ecosystem has significantly grown, the number of local companies has surged, and brand effect has greatly improved. Tech City is an example of a well-balanced combination of public effort and private governance, based on the region's historical background and its potential for growth. It is an effective coordination of public policy and private active investment, services, research, and education. The market platform for institutional technology and commercialization, and aggressive investment shares in the risk, have lead to its growth as a start-up and an innovative city. Britain's efforts to expand the nationwide cluster for the future-oriented digital economy is most noteworthy.