• Journal of The Korea Institute of Healthcare Architecture
• /
• v.14 no.1
• /
• pp.7-20
• /
• 2008

This study is an analysis of the characteristics between the remodeling of an existing hospital and the remodeling of an existing hospital with the addition of a new annex. The comparison of the two remodeling methods focused on the difference of gross area, circulation system, improvement of hospital function, profitability of remodeling construction, and so on. The result of this study can be summed up as follows. The remodeling of an existing hospital with a new annex has the merit of enlarging new areas, promoting the function of the hospital, changing the inner circulation system, and facilitating the construction. However, it has the demerit of requiring too much money and expanded space for the construction. Therefore, it is possible to use the existing hospital remodeling method for small scale hospitals that do not have many patients, but it would be necessary for big scale hospitals with many patients to adopt the method of remodeling the existing hospital with the addition of an annex.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.92-97
• /
• 2016

This paper presents design and simulation of wide band RF microswitch that uses electrostatic actuation for its operation. RF MEMS devices exhibit superior high frequency performance in comparison to conventional devices. Similar techniques that are used in Very Large Scale Integration (VLSI) can be employed to design and fabricate MEMS devices and traditional batch-processing methods can be used for its manufacturing. The proposed switch presents a novel design approach to handle reliability concerns in MEMS switches like dielectric charging effect, micro welding and stiction. The shape has been optimized at actuation voltage of 14-16 V. The switch has an improved restoring force of 20.8 μN. The design of the proposed switch is very elemental and primarily composed of electrostatic actuator, a bridge membrane and coplanar waveguide which are suspended over the substrate. The simple design of the switch makes it easy for fabrication. Typical insertion and isolation of the switch at 1 GHz is -0.03 dB and -71 dB and at 85 GHz it is -0.24 dB and -29.8 dB respectively. The isolation remains more than - 20 db even after 120 GHz. To our knowledge this is the first demonstration of a metal contact switch that shows such a high and sustained isolation and performance at W-band frequencies with an excellent figure-of merit (fc=1/2.pi.Ron.Cu =1,900 GHz). This figure of merit is significantly greater than electronic switching devices. The switch would find extensive application in wideband operations and areas where reliability is a major concern.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.57-64
• /
• 1998

A neutralized fabric filter of which major raw materials were polyester and stainless steel fibers was developed and its physiochemical properties and basic filter characteristics were investigated. Four finds of dusts generated in the typical domestic industry were used, which were coke dust from a steel manufacturing process, cement dust from a cement manufacturing process, flu ash from a fluidized-bed combustor, and incinerator ash from a waste plastics incinerator. The physicochemical properties of the neutralized fabric filter were analyzed in terms of changes in tensile strength and initial elastic modulus under $SO_2$ and $NO_2$ atmospheres, mean flow pore pressure, bubble point pore diameter, mean flow pore diameter, and pore size distribution. In addition, the pressure drop, dust penetration, and figure of merit for the fabric filter were investigated in a bench-scale filter testing unit. The pressure drop increased as the filtration velocity and dust loading increased, and its increasing shape depended on the type of dust. The dust penetration rapidly decreased as the dust loading increased irrespective of the type of dust. The figures of merit for the fabric filters increased in the early stage of filtration and then showed rapid decreases followed maintaining a constant level.

• Journal of the military operations research society of Korea
• /
• v.8 no.1
• /
• pp.53-70
• /
• 1982

This thesis develops a more realistic and applicable new set covering model that is adjusted and supplied by the existing set covering models, and induces an algorithm for solving the new set covering model, and applies the new model and the algorithm to an actual set covering problems. The new set covering model introduces a probabilistic covering aistance ($0{\eqslantless}p{\eqslantless}1$)or time($0{\eqslantless}p{\eqslantless}1$) instead of a deterministic covering distance(0 or 1) or time (0 or 1) of the existing set covering model. The existing set covering model has not considered the merit of the overcover of customers. But this new set covering model leads a concept of this overcover to a concept of the parallel system reliability. The algorithm has been programmed on the UNIVAC 9030 for solving large-scale covering problems. An application of the new set covering model is presented in order to determine the locations of the air surveillance radars as a set covering problem for a case-study.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.89-97
• /
• 1998

In this study, under large scale yielding conditions crack propagation is found to governed by parameters based on the J-integral or on the crack opening displacement. But initiation of crack propagation of ductile material seems to be controlled by just on parameter that is the strain. The relationship between the critical value of J-integral and the local fracture strain in uniaxial tensile test in the region of maximum reduction in area. Therefore, the fundamental theorectical equation by the proposed elastic-plastic fracture toughness and the local fracture strain has a merit. in comparison with the ASTM method, which can measure by using the load-displacement curve and the specimens in tenslie test.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.25-33
• /
• 1998

In this study, under large scale yielding conditions crack propagation is found to governed by parameters based on the J-integral or on the crack opening displacement. But initiation of crack propagation of ductile material seems to be controlled by just on parameter that is the strain. The relationship between the critical value of J-integral and the local fracture strain in uniaxial tensile test in the region of maximum reduction in area. Therefore, the fundamental theoretical equation by the proposed elastic-plastic fracture toughness and the local fracture strain has a merit, in comparison with the ASTM method, which can measure by using the load-displacement curve and the specimens in tensile test.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.9
• /
• pp.631-636
• /
• 2008

Solar thermal systems are recently refocused by higher oil prices, but did not completely restore the people's confidence owing to the past bad systems. Several types of solar water heating systems were analyzed in characteristics and some proper systems were proposed under Korean climates and system scale. As a small system, natural circulation system should be installed only in a southern region of Korea, with a freeze protection valve instead of heating coil for freeze protection. In most area of Korea, the forced circulation type with a heat exchange coil inside a thermal storage tank or with a spiral-jacketed storage tank, proposed and verified by the authors, has a merit of stable performance and freeze protection.

• Journal of Navigation and Port Research
• /
• v.29 no.4
• /
• pp.335-339
• /
• 2005

The superconducting electromagnetic propulsion system has been proposed as one of new alternative propulsion systems. Especially, the helical-type propulsion system has the greatest merit that is able to use the solenoid-type superconducting magnets with high magnetic fields. In this study, calculations of characteristics of the large scale helical-type thruster are carried out on the basis of our experimental results. As a couple of results of calculations, it is found that the thruster efficiency quickly increases with the length of electrode up to about 5 m and then goes up to about 0.9. The thruster efficiency peaks at a certain point ($^{\sim}0.6\;m$) and then falls as length of pitch increases.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.45-50
• /
• 2017

Micro-service Architecture is a service architecture optimized for large-scale distributed systems such as real-time realistic broadcasting systems, so that are fiercely adopted by Global leading service platform vendors such as Netflix and Twitter due to the merit of horizontal performance scalability enabling the scale-out technique. In addition, micro-service architecture makes it possible to execute image processing and real-time data analysis using an asynchronous-based processing that are difficult to handle in Web API such as REST. In this paper, an event stream processing framework applicable to asynchronous based micro services is proposed in the sense that the accountability of event processing order is not guaranteed in the events such as IoT sensor data analysis or cloud-based image editing because these are the situations where the real-time media editing generates multiple event streams and asynchronous processes in the platform.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.55-66
• /
• 2015

In the perspective of industrial health management, it is important for the employee to decrease their job stress, to improve their productivity and quality of labor. In this study, the job stress, and it's influence on PWI(Psychosocial Wellbeing Index) were investigated by the questionnaire survey of 138 industrial workers who had studied assistive technology in college. The contents of questionnaire consist of the demographic characteristics, job-related characteristics, job stress and psycho-social stress. We evaluated job stress by KOSS-SF(Korean Occupational Stress Scale-Sort Form) and psychosocial stress by PWI-SF(Psychosocial Well-being Index-Short Form). To analyze the results, we evaluated the exposure level of KOSS and PWI by demographic characteristics and job-related characteristics using significance tests. Also, we estimated the relationship among demographic characteristics, job-related characteristics, job stress and psychosocial stress, using correlation analysis. As a results, all workers were found to be in a group under the high risky stress. It showed that the scale index of female's job non-autonomy and pwi were much larger than those of male's. Therefore, to guarantee job autonomy of female workers should be more emphasized, to improve their working environment. Job type had significant relationships with many job stress category; physical environment, job demand, job instability and organization culture. Regarding pwi, the scale index of the workers who is in charge of the civil service such as contacting the disabled and the aged in person, were much larger than that of the other workers. Accordingly, the job stress management program including physical environment, job demand, job instability and organization culture, should be suggested, to decrease the stress of the workers in charge of the disabled and the elders service. The strongest predictors of pwi was organization system through maximum positive relations between organization system and pwi. Therefore, it indicates that improvement of organization system such as a fair merit rating, a manpower supply, demand plan and department cooperation is urgently needed to reduce pwi.