• Water Engineering Research
• /
• 제3권1호
• /
• pp.31-44
• /
• 2002

The effect of diurnal cycle, intermittent visit of observation satellite, sensor installation, partial coverage of remote sensing, heterogeneity of soil properties and precipitation to the soil moisture estimation error were analyzed to present the global sampling strategy of soil moisture. Three models, the theoretical soil moisture model, WGR model proposed Waymire of at. (1984) to generate rainfall, and Turning Band Method to generate two dimensional soil porosity, active soil depth and loss coefficient field were used to construct sufficient two-dimensional soil moisture data based on different scenarios. The sampling error is dominated by sampling interval and design scheme. The effect of heterogeneity of soil properties and rainfall to sampling error is smaller than that of temporal gap and spatial gap. Selecting a small sampling interval can dramatically reduce the sampling error generated by other factors such as heterogeneity of rainfall, soil properties, topography, and climatic conditions. If the annual mean of coverage portion is about 90%, the effect of partial coverage to sampling error can be disregarded. The water retention capacity of fields is very important in the sampling error. The smaller the water retention capacity of the field (small soil porosity and thin active soil depth), the greater the sampling error. These results indicate that the sampling error is very sensitive to water retention capacity. Block random installation gets more accurate data than random installation of soil moisture gages. The Walnut Gulch soil moisture data show that the diurnal variation of soil moisture causes sampling error between 1 and 4 % in daily estimation.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1330-1335
• /
• 2012

This paper proposes an automatic measurement sampling method for the semiconductor manufacturing process. The method recommends sampling rates using information of process capability indexes and production scheduling plan within the restricted metrology capacity. In addition, it automatically controls the measurement WIP (Work In Process) using measurement priority values to minimize the measurement risks and optimize the measurement capacity. The proposed sampling method minimizes measurement controls in the semiconductor manufacturing process and improves the fabrication productivity via reducing measurement TAT (Turn Around Time), while guaranteeing the level of process quality.

• 보건교육건강증진학회지
• /
• 제29권1호
• /
• pp.39-57
• /
• 2012

Objectives: This study was to measure community capacity using individual-level and organizational-level capacity indicators and illuminated the relationship of community capacity and self-rated health status in two regions in Seoul, Korea. Methods: The data from individual surveys were obtained by quota sampling the residents of two autonomous gu in Seoul (N=1,000). The data from organizational surveys were obtained by snowball sampling lists of organizations in the possession of gu offices with a sampling frame (N=153). The survey tools were 6 indicators regarding residents' social capital and a sense of community and 5 indicators regarding community-based organizations and their networks. The analysis methods consisted of the effect of the components of capacity on health status and social network analysis. Results: As for capacity on individual levels, while D-gu was mainly developed inn individual capacity in terms of social interaction, Y-gu was stronger in a sense of community and cohesion among residents. As for capacity on organizational levels, Y-gu was more developed than was D-gu in associational networks. Conclusion: It is necessary to develop health promotion program per community and to strengthen partnerships with and among grassroots organizations based in local communities through the measurement of community capacity.

• 한국경영과학회지
• /
• 제28권3호
• /
• pp.49-60
• /
• 2003

In this paper, we study the joint design of sampling inspections and service capacities for multi-products. Products of different defect rates which are either deterministic or random variables are supplied in batches after sampling inspection and rework. When supplied, all defective products that have not been inspected in batches are uncovered through total inspection and returned to service. We identify the optimal inspection policies and service capacities for multi-products reflecting the relationships between inspection rework costs and service provision costs. We also develope a marginal allocation algorithm for the optimal allocation of the limited total service capacity to products as well as inspection quantities.

• Journal of applied mathematics & informatics
• /
• 제42권1호
• /
• pp.179-187
• /
• 2024

In the Quality Control and inspection processes, the use of attribute sampling strategies is crucial. In this study, we incorporate the neutrosophic fuzzy acceptance sampling plan method to present a fresh approach to attribute sampling plans. Utilizing the benefits of neutrosophic fuzzy sets, the proposed sampling plan method models and assesses the acceptance standards for attribute sampling. We compare the suggested method to already-in-use attribute sampling techniques plans with new attribute six sigma sampling techniques plan is proposed in order to verified its efficacy. The outcomes show the neutrosophic fuzzy acceptance sampling plan's superiority in terms of its capacity to manage uncertainties, account for ambiguity, and produce more precise quality evaluation outputs.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.145-151
• /
• 2004

Reliability assurance problem is an important issue in advanced company with good R&D capacity. In Korea, long-term and large-scale project for reliability improvement and certification have been conducted from 2000, 4 years ago. Generally, assurance is composed of system assurance and lot assurance. For reliability lot assurance. it is prerequisite to development reliability sampling plan with time-saving and minimum cost. In this paper, we aim to investigate previous study on reliability lot assurance focused on reliability sampling plans and propose some suggestions for the future study.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.608-616
• /
• 2013

This paper presents an adaptive sampling method for electrocardiogram (ECG) signal detection. First, by employing the strings matching process with compression dictionary, we recognize each segment of ECG with different characteristics. Then, based on the non-uniform sampling strategy, the sampling rate is determined adaptively. As the results of simulation indicated, our approach reconstructed the ECG signal at an optimized sampling rate with the guarantee of ECG integrity. Compared with the existing adaptive sampling technique, our approach acquires an ECG signal at a 30% lower sampling rate. Finally, the experiment exhibits its superiority in terms of energy efficiency and memory capacity performance.

• 대한전자공학회논문지TC
• /
• 제45권6호
• /
• pp.34-51
• /
• 2008

인터넷이 일상생활에서 중요한 위치를 차지함에 따라 인터넷에서 발생되는 트래픽의 특성을 밝히는 것은 매우 중요한 연구과제로 주목을 받고 있다. 그러나 인터넷 트래픽은 대용량이므로 쉽게 다룰 수 없다. 이러한 문제는 인터넷 트래픽 측정 연구에 가장 큰 장애다 많은 연구자들은 다양한 샘플링 기법을 통해 트래픽을 다를 수 있는 양으로 샘플링하여 분석하고 있다. 본 연구에서는 기존의 인터넷 측정 연구에서 사용된 샘플링 기법을 비교 분석하고, 가장 효과적인 샘플링 방안을 제시하고자 한다. 연구에 비교 사용된 샘플링 기법은 규칙적 샘플링, 단순 랜덤 샘플링, 층화 샘플링이며, 샘플링 단위는 1/10, 1/100, 1/1000을 사용하였다. 분석한 항목은 트래픽 크기 분석, 엔트로피 분석, 패킷 크기 분석이다. 단순 랜덤 샘플링은 무난한 결과를 보였고, (간격을 패킷 개수로 설정한) 규칙적 샘플링은 대상과 샘플링 강도에 상관없이 고른 결과를 보였다. 한편, 간격을 시간으로 설정한 규칙적 샘플링은 매우 좋지 않을 결과를 나타내었다. 전송층 프로토콜을 기준으로 층화 샘플링 수행할 경우 더욱 좋은 결과를 얻을 수 있었다. 연구 결과를 통해 샘플링 기법이 시간에 따른 트래픽의 흐름을 얼마나 잘 유지하는가가 샘플링 성능을 좌우함을 알 수 있었다. 또한 엔트로피 분석은 샘플링에 강하고, 이상 트래픽 탐지에 매우 적절함이 확인되었다. 그러나 병목 현상에 의한 트래픽 크기 감소는 잘못된 엔트로피 분석 결과를 유발할 수 있음을 발견하였다. 마지막으로, 패킷 크기 분포는 패킷 샘플링 방식이나 강도에 영향을 받지 않음을 발견하였다.

• 한국산업보건학회지
• /
• 제15권1호
• /
• pp.8-18
• /
• 2005

Adsorption capacity for the charcoal were tasted in this study to verify the performance of them for the use of the sampling media in industrial hygiene field. Two set of experiments were conducted. The first experiment was to test performance of the tested charcoal tube that were assembled in the laboratory with the use of the GR grade charcoal. The other tests were investigate the adsorption capacity of the charcoal tested in this study and charcoals embedded in the commercial charcoal tubes. Known air concentration samples for benzene, toluene, and o-xylene were prepared by the dynamic chamber. 1. At low air concentration levels (0.1${\times}$TLV), there was no significant differences between the tested charcoal tubes and the SKC charcoal tubes. This implies that there is no defect with the adsorption capacity of the charcoal. 2. At high concentration with 60 minutes sampling, the breakthrough were found only in the tested charcoal while no breakthrough were shown in the SKC charcoal. 3. From the breakthrough tests for the charcoal, the micropore volume(Wo) were calculated by the curve fitting with the use of Dubinin/Radushkevich(D/R) adsorption isotherm equation. The calculated values were 0.687cc/g for SKC, 0.504cc/g for Sensidyne, and 0.419cc/g for the tested charcoal(Aldrich). 4. Adsorption capacities were obtained from the isotherm curves shown adsorption capacities at several levels of the challenge concentration. All range of the air concentration concerned in industrial hygiene, the SKC charcoal showed approximately two times of adsorption capacity compared to the tested charcoal.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.65-70
• /
• 2008

The capacity spectrum method (CSM) is a deterministic seismic analysis approach wherein the expected seismic response of a structure is established as the intersection of the demand and capacity curves. Recently, there are a few studies about a probabilistic CSM where uncertainties in design factors such as material properties, loads, and ground motion are being considered. However, researches show that soil-structure interaction also affects the seismic responses of structures. Thus, their uncertainties should also be taken into account. Therefore, this paper presents a probabilistic approach of using the CSM for seismic analysis considering uncertainties in soil properties. For application, a reinforced concrete bridge column structure is employed as a test model. Considering the randomness of the various design parameters, the structure's probability of failure is obtained. Monte Carlo importance sampling is used as the tool to assess the structure's reliability when subjected to earthquakes. In this study, probabilistic CSM with and without consideration of soil uncertainties are compared and analyzed. Results show that the analysis considering soil structure interaction yields to a greater probability of failure, and thus can lead to a more conservative structural design.