• 한국구조물진단유지관리공학회 논문집
• /
• 제19권4호
• /
• pp.101-108
• /
• 2015

급격한 산업화와 삶의 질의 변화로 인해 생산된 고밀도 폐유리의 양은 꾸준히 증가하고 있으나 대부분 재활용되지 못하고 있다. 특히 고밀도 폐유리의 경우 불법적으로 처리되거나 매립되는 실정이다. 한편, 원전구조물의 안전성 확보를 위해 차폐 성능이 우수한 재료가 사회적으로 요구되고 있다. 콘크리트는 가장 많이 사용되고 있는 건설재료이며, 많은 양의 자원들이 콘크리트를 생산하기 위해 사용되고 있다. 따라서 고밀도 폐유리를 차폐 콘크리트 재료로 재활용할 수 있는 방안에 대한 연구가 요구되어진다. 본 연구에서는 고밀도 폐유리를 차폐 콘크리트 잔골재로의 적용가능성을 평가하였다. 결과에 따르면, 폐유리를 혼입한 모르타르의 경우, 일반 모르타르에 비하여 단위용적질량이 증가하여 차폐 성능 개선이 가능할 것으로 판단된다. 폐유리 혼입에 의해 강도는 감소하는 것으로 나타났으며, 세척의 경우보다 비세척의 경우에 강도 발현이 유리한 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.428-431
• /
• 2004

Smart structural system is defined as structural system with a certain-level of autonomy relying on the embedded functions of sensors, actuators and processors, that can automatically adjust structural characteristics, in response to the change in external disturbance and environments, toward structural safety and serviceability as well as the extension of structural service life. In this study, carbon and glass hybrid fiber materials were investigated fundamentally for the applicability of self diagnosis in smart concrete structural system as embedded functions of sensors.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.206-206
• /
• 2017

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.755-761
• /
• 2009

The major advantage of transparent materials over traditional materials in noise barriers is aesthetics. The transparent panel materials such as clear plastic or glass are an ideal way of reducing or virtually eliminating the visual impact of a noise barrier. With the use of transparent materials, the drivers' view of the roadside and the sunlight penetration to the highway would not be blocked. With the use of transparent materials, the highway and barrier appear less imposing. Korean Industrial Standards for soundproof panels have been established. But, transparent soundproof panels are not included in this standards. And, some specifications provide only a few basic characteristics for transparent soundproof panels. To develop guidelines on quality criteria for transparent soundproof panel, their mechanical properties such as wind load resistance, safety under impact, and abrasion resistance were experimentally investigated.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2000년도 추계 학술논문발표회 논문집
• /
• pp.39-45
• /
• 2000

In recent years, composite materials such as fiber reinforced plastics (FRP) have gained considerable attention in the aircraft and automobile industries due to their light weight, high modulus and specific strength. In practice, control of chip formation appears to be the most serious problem since chip formation mechanism in composite machining has significant effects on the finished surface ［1,2,3,4,5］. Current study will discuss frequency analysis based on autoregressive (AR) time series model and process characterization in orthogonal cutting of a fiber-matrix composite materials. A sparsely distributed idealized model composite material, namely a glass reinforced polyester (GFRP) was used as workpiece. Analysis method employs a force sensor and the signals from the sensor are processed using AR time series model. The experimental correlation between the different chip formation mechanisms and model coefficients are established.(omitted)

• 한국안전학회지
• /
• 제13권1호
• /
• pp.85-91
• /
• 1998

Sol-gel derived silica films were prepared by dip-coating onto polymethylmethacylate with Tetraethoxysilane(TEOS) as starting materials. Film properties such as viscosity and thickness were investigated as a function of dip speed, waterprecursor ratio, sol aging time. IR spectra of the gel films prepared from TEOS at various R are given. At small values of R the absorption peaks assignable to C-H vibration in $-OC_2H_5$ groups are observed around 3000 and 1500-1300 $cm^{-1}$. These bands indicate that the -$-OC_2H_5$ groups are retained in the gel at small values of R because of incomplete hydrolysis of TEOS. Film behaviour was interpreted in terms of the dependence of hydrolysis and condensation rates on the interplay between sol pH and waterprecursor ratio. Film thickness was found to increase by approximately a factor of two as waterprecursor ratio increased from two to six. Film thickness also increased with sol prepolymerization time. Surface quality was correlated with processing conditions.

• 한국포장학회지
• /
• 제15권2호
• /
• pp.61-65
• /
• 2009

국내에서 불고기소스용 유리병을 수집하여 가스켓에 함유되어 있는 가소제 함량을 정량하고 소스로의 이행실험을 하였다. 가스켓에서의 가소제 함량은 DIDP만 34.6~35.9% 범위로 검출되었고, 소스에서의 가소제는 검출되지 않았다. 유럽연합과 국내외 관련 법규에서의 가소제 용출 기준을 감안할 때 조사된 모든 가스켓 시료들은 현행 기준 규격에 적합한 것으로 확인되었다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 춘계학술대회
• /
• pp.251-257
• /
• 2005

The purpose of this study is to execute the investigation of injurious factors causing muscle-skeletal diseases at an automotive glass manufacturing company and, on the basis of the results, to enhance productivity by the improvement of working environment. By using an survey and an ergonomic evaluation method, symptoms of muscle-skeletal diseases of workers and working postures at each process were analyzed, and quantitative evaluation of muscle-skeletal disease risk against each process was performed. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. Suggested improvement plan was applied to the workplace step by step and it is confirmed that improvement plan not only removes the injurious factors of muscle-skeletal diseases but also is effective to enhance productivity.

• 대한안전경영과학회지
• /
• 제7권2호
• /
• pp.85-94
• /
• 2005

The purpose of this study is to execute the investigation of injurious factors causing muscle-skeletal diseases at an automotive glass manufacturing company and, on the basis of the results, to enhance productivity by the improvement of working environment. By using an survey and an ergonomic evaluation method, symptoms of muscle-skeletal diseases of workers and working postures at each process were analyzed, and quantitative evaluation of muscle-skeletal disease risk against each process was performed. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. Suggested improvement plan was applied to the workplace step by step and it is confirmed that improvement plan not only removes the injurious factors of muscle-skeletal diseases but also is effective to enhance productivity.

• 한국안전학회지
• /
• 제8권4호
• /
• pp.127-132
• /
• 1993

Porphyrin-catalyzed reduction of TNT to triaminotoluene was performed in both batch reactions and a continuous process. Packed-bed reactors were used to study porphyrin-catalyzed reduction in a continuous process. A reactor was packed with DEAD(diethylaminoethyl)-substituted glass beads on which $Co^{+3}$_centered deuteroporpgyrin Ⅸ, -2, 4-disulfonic acid was immobilized, and another containing only DEAE glass beads was used as a control. The porphyrin exhibited catalytic activity in its immobilized state up to 100 hours of operation. Based on the successful abatement of nitrobodies by porphyrin-catalyzed reduction in both batch and continuous process, this process is recommended to be used as a pretreatment for biological treatment or carbon adsorption treatment of TNT wastes.