• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.495-502
• /
• 2005

Copper was plated on the tungsten substrate by use of a direct copper electroless plating. The optimum deposition conditions were found to be with a concentration of $CuSO_4$ 7.615 g/L, EDTA of 10.258 g/L, and glyoxylic acid of 7 g/L, respectively. The solution temperature was maintained at $60^{\circ}C$. The pH was varied from 11.0 to 12.8. After the deposition, the properties of the copper film were investigated with X-ray diffractometer (XRD), Field emission secondary electron microscope (FESEM), Atomic force microscope (AFM), X-ray photoelectron spectroscope (XPS), and Rutherford backscattering spectroscope (RBS). The best deposition condition was founded to be the solution pH of 11.8. In the case of 10 min deposition at the pH of 11.8, the grain shape was spherical, Cu phase was pure without impurity peak ($Cu_2O$ peak), and the surface root mean square roughness was about 11 nm. The thickness of the film turned out to be 140 nm after deposition for 12 min and the deposition rate was found to be about 12 nm/min. Increase in pH induced a formation of $Cu_2O$ phase with a long rectangular grain shape. The pH control seems to play an important role for the orientation of Cu in electroless deposition. The deposited copper concentration was 99 atomic percent according to RBS. The resulting Cu/W film yielded a good adhesive strength, because Cu/W alloy forms during electroless deposition.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.486-491
• /
• 2008

This paper describes a model identification method that has been applied to a commercial 12-inch RTP (rapid thermal processing) equipment with an ultimate aim to develop a high-performance advanced controller. Seven thermocouples are attached on the wafer surface and twelve tungsten-halogen lamp groups are used to heat up the wafer. To obtain a MIMO balanced state space model, multiple SIMO (single-input multiple-output) identification with highorder ARX models have been conducted and the resulting models have been combined, transformed and reduced to a MIMO balanced state space model through a balanced truncation technique. The identification experiments were designed to minimize the wafer warpage and an output linearization block has been proposed for compensation of the nonlinearity from the radiation-dominant heat transfer. As a result from the identification at around 600, 700, and $800^{\circ}C$, respectively, it was found that $y=T(K)^2$ and the state dimension of 80-100 are most desirable. With this choice the root-mean-square value of the one-step-ahead temperature prediction error was found to be in the range of 0.125-0.135 K.

• Journal of Environmental Science International
• /
• v.26 no.5
• /
• pp.573-584
• /
• 2017

In order to simulate a typhoon precisely, the satellite observation data has been assimilated using WRF (Weather Research and Forecasting model) three-Dimensional Variational (3DVAR) data assimilation system. The observation data used in 3DVAR was GPS Radio Occultation (GPS-RO) data which is loaded on Low-Earth Orbit (LEO) satellite. The refractivity of Earth is deduced by temperature, pressure, and water vapor. GPS-RO data can be obtained with this refractivity when the satellite passes the limb position with respect to its original orbit. In this paper, two typhoon cases were simulated to examine the characteristics of data assimilation. One had been occurred in the Western Pacific from 16 to 25 October, 2015, and the other had affected Korean Peninsula from 22 to 29 August, 2012. In the simulation results, the typhoon track between background (BGR) and assimilation (3DV) run were significantly different when the track appeared to be rapidly change. The surface wind speed showed large difference for the long forecasting time because the GPS-RO data contained much information in the upper level, and it took a time to impact on the surface wind. Along with the modified typhoon track, the differences in the horizontal distribution of accumulated rain rate was remarkable with the range of -600~500 mm. During 7 days, we estimated the characteristics between daily assimilated simulation (3DV) and initial time assimilation (3DV_7). Because 3DV_7 demonstrated the accurate track of typhoon and its meteorological variables, the differences in two experiments have found to be insignificant. Using observed rain rate data at 79 surface observatories, the statistical analysis has been carried on for the evaluation of quantitative improvement. Although all experiments showed underestimated rain amount because of low model resolution (27 km), the reduced Mean Bias and Root-Mean-Square Error were found to be 2.92 mm and 4.53 mm, respectively.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.255-261
• /
• 2016

The present study was conducted to characterize physiological responses of aerial part according to soil water stresses in 'Mihong' peach trees. Discolorations, wilting and falling of leaves were observed in chronological order as response for waterlogging and no irrigation and the phenomena started from basal to end of shoots. Shoot growth in elongation and thickness decreased and fallen leaves were severe in waterlogged trees. Function of water uptake by roots and photosynthesis and leaf respiration decreased by waterlogging. Leaf chlorophyll contents decreased in both treatments. In waterlogging treatment, decrease of chlorophyll was observed in normal leaves with waterlogging using light microscopy. Starch content was lower in both treatment and carbohydrate content was lower in root with waterlogging. These results demonstrated that waterlogging weakened the function of soil water uptake and movement and decreased photosynthesis and fallen leaves. Finally the peach trees would wither or suffer low temperature damage through the shortage of reserve accumulations. We suggested that waterlogging damage in peach trees could be reduced to take notice of irrigation and install drainage facility to improve soil condition.

• Journal of Forest and Environmental Science
• /
• v.15 no.1
• /
• pp.77-88
• /
• 1999

This experiment was carried out to compare the cultural characteristics of mycorrizal fungi associated with Pinus species, and to form mycorrhizal association with Pinus thunbergii by artificial inoculation of these fungi. Mycorrhizal fungi tested showed great variations in cultural characteristics. Most fungal isolates was best grown on MP medium, except PDA for Lepista sp.(Ln73/92). Hagem for Rhizopogon rubescens(FRI91017), and FDA for Paxillus sp.(Pa60/92). Optimum temperature for these fungi was $25^{\circ}C$, except $30^{\circ}C$ for Pisolithus tinctorius(FRI91004 and Pt1). The range of pH conditions favorable for these fungal isolates were also variable from weak acidic(pH5) to weak alkalic(pH8). Utilization of the carbon sources for these mycorrhizal fungi was different. Fructose, glucose, and maltose were all utilized well, while xylose was not utilized generally. Mycelial growth on the media supplemented with potassium nitrate was better than those on other media with urea, asparagine, or peptone as a nitrogen source, and the poor growth was observed on the media with urea. Pisolithus tinctorius(Pt1) among 7 mycorrhizal fungi artificially inoculated for the mycorrhizal synthesis on pinus thunbergii seedlings in the test tube containing a mixture of peat moss-vermiculite(2:1, v/v) formed mycorrhizae successfully after 3 months. P. tinctorius formed branched and unbranched roots covered with thick fungal mantle and radiating extemal hyphae. Mycorrhizal root cross-sectioned by hand, stained, and observed by Nomarski interference microscope showed typical characteristics of ectomycorrhizae: fungal mantle on epidermal cells and thick Hartig net hyphae around cortex cells.

• The Plant Pathology Journal
• /
• v.23 no.3
• /
• pp.174-179
• /
• 2007

Seedlot disinfection techniques to control mung bean sprout rot caused by Colletoricum acutatum and C. gloeosporioides were evaluated for commercial production scheme. Soaking seedlots in propolis (100 X) and ethanol (20% for 30 min) appeared promising with control values of 85.5 and 80.8 respectively, but still resulted in up to 20% rot incidence. None of the C. acutatum conidia survived through hot water immersion treatment (HWT) for 10 min at temperatures of 55, 60 and $65^{\circ}C$, whereas the effective range of the dry heat treatment (DHT) was $60-65^{\circ}C$. Tolerance of mung bean seedlot, as estimated by hypocotyl elongation and root growth, was lower for HWT than for DHT. Germination and growth of sprouts were excellent over the range of $55-65^{\circ}C\;at\;5^{\circ}C$ intervals, except for HWT at $65^{\circ}C$ for 5 min. At this marginal condition, heat damage appeared so that approximately 2% of seeds failed to sprout to normal germling and retarded sprouts were less than 5% with coarse wrinkled hypocotyls. These results suggested that DHT would be more feasible to disinfect mung bean seedlots for commercial sprout production. Heat treatment at above ranges was highly effective in eliminating the epiphytic bacterial strains associated with marketed sprout rot samples. HWT of seedlot at 55 and $60^{\circ}C$ for 5 min resulted in successful control of mung bean sprout rot incidence with marketable sprout quality. DHT at 60 and $65^{\circ}C$ for 30 min also gave good results through the small-scale sprouting system. Therefore, we optimized DHT scheme at 60 and $65^{\circ}C$ for 30 min, considering the practical value of seedlot disinfection with high precision and accuracy. This was further proved to be a feasible and reliable method against anthracnose incidence and those bacterial strains associated with marketed sprout rot samples as well, through factory scale mung bean sprout production system.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.774-779
• /
• 2013

We synthesized the solution processible monodispersed $TiO_2$ crystalline nano-sol with ~ 5 nm in size by sol-gel method. Through the spin-coating of crystalline $TiO_2$ nano-sol at low processing temperature, we could make even blocking interlayer on the rough FTO transparent electrode substrate. The rough FTO surface could be gradually smoothed by the spin-coating of nano-crystalline $TiO_2$ sol based blocking interlayer. The 1, 2.5, 5, and 10 wt% of nanocrystalline $TiO_2$ sol formed 29, 38, 62, and 226 nm-thick of blocking interlayer in present experimental condition, respectively. The 5 and 10 wt% of $TiO_2$ nano-sol could effectively fill up the valley part of bare FTO with 48.7 nm of rms (root mean square) roughness and consequently enabled the ZnO to be grown to vertically aligned one dimensional nanorods on the flattened blocking interlayer/FTO substrate.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.205-210
• /
• 1994

This study was conducted to develop a method of mass production by cutting of superior genotypes of Larix leptolepis and to examine the effects of ortet age, clone, crown position, and an applied plant growth substance upon the rooting of cuttings. Four different ortet ages, 2, 8, 16 and 30 years and three levels of root-promoting substances, indole butyric acid(IBA), at 1000, 2000, and 5000ppm were employed. Greenwood cuttings were taken from mother trees in late July and rooted for three months in rooting medium containing peatmoss : vermiculite : perlite(1 : 1 : 1 by volume). with temperature controlled at $20-25^{\circ}C$, humidity by intermittent misting and light by partial shading in the greenhouse. Cuttings treated with 1000ppm IBA showed highest rooting, with 80%, 71%, 52%, 25% for 2-, 8-, 16-. 30-year-old ortet, respectively. Untreated cuttings showed rooting of 52%, 48%, 36%, 20% for the ortet age of 2, 8, 16, 30 years, respectively. The average number of adventitious roots decreased with increasing ortet age from 2 to 30 years, whereas IBA treatment increased the number of roots in all ages. A variation in rooting among 20 clones tested was observed. The 4 clones, Chungnam 6, and 7 and Chonbuk 1, and 9 showed good rooting of about 67%, while Kangwon 49 showed boor rooting of 40% at 1000ppm IBA treatment. When crown position was compared, cuttings taken from middle crown showed highest rooting of 60%, while cuttings from upper crown showed lowest rooting of 53%.

• The Journal of Korean Medicine
• /
• v.31 no.1
• /
• pp.138-152
• /
• 2010

Objective: Yikgeebohyul-tang (Yiqib$\check{u}$xu$\grave{e}$-t$\bar{a}$ng) is one of the representative prescriptions for invigoration of vitality and nourishing of the blood. This study was carried out to investigate the effects of Yikgeebohyul-tang (Yiqib$\check{u}$xu$\grave{e}$-t$\bar{a}$ng) on hair regrowth and cytokine changes in a shaving model of C57BL6 mice. Method: Five-week-old mice were acclimated for 1 week at a temperature between $21-23^{\circ}C{\acute{E}}$, 40-60% relative humidity, and 12h of a light/dark cycle before beginning of the experiment. There were two groups including normal saline (control) and a positive control of oral intake of Yikgeebohyul-tang (Yiqib$\check{u}$xu$\grave{e}$-t$\bar{a}$ng) extract (sample) in 18 female mice. The test compounds were topically treated once a day over 14 days. The hair regrowth was photographically and histologically determined during the experimental period of 14 days. Revelation of TGF-${\beta}1$ and EGF were also determined using immunohistochemistry. In addition to that, IFN-$\gamma$, IL-4 and IL-10 were determined in serum. Results: Hair regrowth in the sample group was promoted earlier and faster than the control group, as shown by concentrations of hairs and thick-hair ratio in the sample group. TGF-${\beta}1$ was not revealed in either control or sample group. EGF was strongly positive in out root sheath of some thick hair of the sample group. Serum IFN-$\gamma$ was significantly decreased in the sample group compared with the control group at 7 experimental days. However, it was not significantly decreased at 14 experimental days. Serum IL-4 was significantly increased in the sample group compared with the control group at 7 experimental days. However, it was not significantly decreased at 14 experimental days. Serum IL-10 was decreased in the sample group compared with the control group, but with no real statistical significance. Conclusion: These results suggest that Yikgeebohyul-tang (Yiqib$\check{u}$xu$\grave{e}$-t$\bar{a}$ng) has hair growth promoting activity and it can be used for treatment of alopecia. Also, these effects relate to EGF revelation of hair roots, a decrease in serum IFN-$\gamma$, and an increase of serum IL-4.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.s02
• /
• pp.66-80
• /
• 1989

Salt injury in rice is caused mainly by the salinity in soil and in the irrigated water, and occasionaly by salinity delivered through typhoon from the sea. The salt concentration of rice plants increased with higher salinity in the soil of the rice growing. The climatic conditions, high temperature and solar radiation and dry conditions promote the salt absorption of rice plant in saline soil. The higher salt accumulation in the rice plant generally reduces the root activity and inhibits the absorption of minerals of rice plant, resulting the reduction of photosynthesis. The salt damages of rice plant, however, are different from different growth stage of rice plants as follows: 1. Germination of rice seed was slightly delayed up to 1.0％ of salt concentration and remarkably at 1. 5％, but none of rice seeds were germinated at 2.5％. This may be due to the delayed water uptake of rice seeds and the inhibition of enzyme activity, 2. It was enable to establish rice seedlings at seed bed by 0.2％ of salt concentration with some reduction of leaf elongation. The increasing of 0.3％ salt concentration caused to the seedling death with varietal differences, but most of seedlings were death at 0.4％ with no varietal differences. 3. Seedlings grown at the nursery over 0.1％ salt, gradually reduced in rooting activity after transplanting according to increasing the salt concentration from 0.1％ up to 0.3％ of paddy field. However, the seedlings grown in normal seed bed showed no difference in rooting between varieties up to 0.1％ but significantly different at 0.3％ between varieties, but greatly reduced at 0.5％ and died at last in paddy after transplanting. 4. At panicle initiation stage, rice plant delayed in heading by salt damage, at meiotic stage reduced in grains and its filling rate due to inhibition of glume and pollen developing, and salt damage at heading stage and till 3 weeks after heading caused to reduction of fertilization and ripening rate. In viewpoint of agricultural policy the overcoming strategy for salt injury is to secure sufficient water source. Irrigation and drainage systems as well as underground drainage is necessary to desalinize more effectively. This must be the most effective and positive way except cost. By cultural practice, growing the salt tolerant variety with high population could increase yield. The intermittent irrigation and fresh water flooding especially at transplanting and from panicle initiation to heading stage, the most sensitive to salt injury, is important to reduce the salt content in saline soil. During the off-cropping season, plough and rotavation with flooding followed by drainage, or submersion and drainage with groove could improve the desalinization. Increase of nitrogen fertilizer with more split application, and soil improvement by lime, organic matter and forign soil addition, could increase the rice yield. Shift of trans-planting is one of the way to escape from the salt injury.