• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.2
• /
• pp.64-71
• /
• 2012

This is a basic study for recovering original form of Nongsanbyeoleop(農山別業) in Gangjin, Jeonnam, created in the latter part of Joseon period and the estimation of originla form at the time of creation was conducted by analyzing related literature and inspecting the actual site. "Joseokruki(朝夕樓記)" of Dasan Jung, Yak Yong could estimate spatial structure and using form of Nongsanbyeoleop and the arrangement of spatial structure in literature could be confirm by on-the-site inspection. The results of this study are as follows. The first, Nongsanbyeoleop managed spatial factors applying natural topography. For the spatial characteristics of Nongsanbyeoleop, the location of ancestral ritual space including deceased father's tomb and tomb house far from the main levee of Yun, Kwang Taek, a father of Yun, Seo Yu by 1.9km and housekeeping could be confirmed. The second, spatial estimation by "Joseokruki" could be possible. "Joseokruki" describes Joseokru.Youngmojae.Hanokkwan.Cheokyunjung.Sangam as construction factors, Wundang.Kookdan.Nokwunoh. as plant factors, Sookyunggan.Keumkoji.Nokeumjung.Uijanghae as hydroponic factors and Pyoeunkok.Aengjakang as natural topography factors. However, most of them were disappeared and at present, only Youngmojae, Keumgoji, Kukdan and Wundang show the past trace. The third is for the changed space of Nongsanbyeoleop and its reason. The surrounding space of Nongsanbyeoleop was planated by land arrangement in 1960s and it played a role of topographical damage because it's recognized as the plane factor including Nongsanbyeoleop's surrounding landscape rather than dotted factor. The forth, the actual measurement of Nongsanbyeoleop and digitalization of manual map of numerical value are judged to be sufficient to apply as the basic material for recovering garden in the future. Because of the diatahce changing method applied at that time, the garden recovery of Nongsanbyeoleop intended to be concreted and 3D model established by digitalized basic materials is considered to apply for multilateral studying. Thus, Nongsanbyeoleop which is byeolseo including the tomb of deceased father based on the conceptual hyo thought shows clear differences from the organized factors of Byolseowonrim of precedent studies and the importance of Byolseowonrim is sufficient. But, the constructional factors which cannot know disappeared spatial factors and accurate location became the limitation of this study. In the future, clear verification of original form must be progressed by excavation which can confirm the location of construction factors.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1182-1187
• /
• 2005

This study was designed to investigate the supplementary effects of Lentinus edodes which were harvested at different time period and part on acetylcholine content and its related enzyme activities in the brain of diabetic mouse model (KK mouse). We fed mice with standard diet (Control diet; CON) or 4 different kinds of experimental diets (DGC: on time harvested, cap of Dong Go; DGS: on time harvested, stipe of Dong Go; HSC: late harvested, cap of Hyang Sin: HSS: late harvested, stipe of Hyang Sin) to KK mouse for 8 weeks. Neurotransmitter such as acetylcholine contents, acetylcholinesterase activities, monoamine oxidase-B ac-tivities and lipid peroxide contents in the brain were measured. The results showed that acetylcholine content was significantly higher in DGC and HSC groups than CON group. The activities of acetylcholinesterase and monoamine oxidase-B enzyme were significantly inhibited in the brain of DGC and HSC groups compared with CON group. Lipid peroxide content was lower in DGC group than CON group. These results suggested that the cap of Lentinus edodes which were harvested on time and late time contain increased acetylcholine content and decreased acetylcholinesterase activities, monoamine oxidase-B activities and lipid peroxide contents. Thus the cap of Lentinus edodes which were harvested at different time periods may play an effective role in enhancing cognitive function.

• Journal of East-West Nursing Research
• /
• v.10 no.1
• /
• pp.11-26
• /
• 2004

The purpose of this study is to investigate the present conditions of nursing investment contents, its conversion process, and output in Oriental University Medical Center, Korea to get good qualified Oriental nursing result which is the ultimate purpose of the Oriental nursing management, and to develope a matrix of Oriental nursing management system on the basis of that project. The subjects for nursing investment and output contents were eighteen nursing directors in eleven Oriental University Medical Center and two hundred thirty-nine nurses with three years and over experience in Oriental medical center. The subjects for Oriental nursing organization, human affair management, and control function were nineteen Oriental medical center in Oriental University Medical Center, Korea. Data were collected from November, 2002 to February, 2003 with questionnaire. Data analysis was done by SPSS PC+ 12 program. Frequency, percentage, and minimum/maximum values were used for investment contents, and frequency and percentage were used for conversion process and output contents. 1. The input factors of oriental nursing management system The objective's western hospital career was over five years of one hundred and seventy-five(73.2%) persons. Nursing in-service education was performed in fourteen hospitals(77.8%). Two hundreds(83.7%) were pro to oriental nurse system. Only four hospitals(22.2%) had independent budget in nursing division. Nursing staff allocation to the bed was from 2.8:1 to 9.06:1 respectively, with a big gap of the rate following the hospitals. 2. The conversion factors of oriental nursing system 1) Oriental nursing system Oriental hospital nursing system was organized independently in ten hospitals among eighteen hospitals. The recruitment of nurses which was a vital role of the nursing division of the hospital was mostly(79%) opened. The education to develope nursing personnels was through in-service one in 97.4%. Education for oriental nursing and management was performed in 42.1%(eight hospitals) and that for reserves was done in 36.8%(seven hospitals). Administration for nursing education by nursing division was 68.5%(thirteen hospitals). The post education evaluation was performed by report submission in 36.8%(seven hospitals), by written examination in 26.3%, by questionnaires in 21.1%, and by lecture presentation in 15.8% subsequently. The directorial meeting for the nursing directors was attended by 84.2%(sixteen hospitals), and the meeting type was the medical executive and support division executive meeting in 55.6%(ten hospitals) and the personnel management in 39.6%(seven hospitals). 2) The actual conditions of oriental nursing personnel management The reason of working in oriental hospital was by voluntary in 67.1%(a hundred and sixty persons), by nursing department order in 28.0%(sixty-seven persons), and by others in 5.0%(twelve persons) respectively. The shift form was a three-shifts one in 94.7%(eighteen hospitals), a two-shift one in only one hospital. Duty assignment was functional in 52.6%(ten hospitals), team and functional in 26.3%(five hospitals) and no team alone. Promotion manual was present at 68.4%(thirteen hospitals) and the competency essentials comprised of performance evaluation in 79%, interview, written examination, training result, study result subsequently. No labor union existed in 79%(fifteen hospitals) 3) Oriental nursing preceptor system There were five oriental hospitals(27.7%) administering the preceptor utilization model, which showed lower rate than the twenty-two medical university hospitals in Seoul in which fifteen hospitals (72.7%) were having the system. To the question of necessity of oriental nurse system asked to the objectives of two hundred and thirty-nine with more than three year-experience in oriental hospital, two hundred persons(83.7%) answered positively. 4) The control of oriental nursing The evaluation results from the target hospitals were mostly not opened in 89.4% of oriental hospitals. Thirteen hospitals(68.3%) had evaluation system of direct managers and the next were three hospitals(15.8%) of direct managers and selves. There was one hospital(5.3% each) where fellows and superiors, fellows, and inferiors' evaluation was performed and no hospital where superiors, fellows, inferiors and selves, and superiors, fellows and selves' evaluation was performed. The QI activity of nursing was 42.1%(eight hospitals) for nursing service evaluation, 36.8% for survey of ECSI, 26.3% for survey of ICSI, 15.8% for medical visit rate, 10% for hospital standardization inspection in sequence. 3. The output factors of oriental nursing management system The job satisfaction appeared good in general, indicating very good in thirty-seven persons (15.7%), good in one hundred and fourteen persons (48.3%) and fair in eighty-five persons(36.0%).

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.61-66
• /
• 2012

Chemical Mechanical Planarization (CMP) is a polishing process used in the microelectronic fabrication industries to achieve a globally planar wafer surface for the manufacturing of integrated circuits. Pad conditioning plays an important role in the CMP process to maintain a material removal rate (MRR) and its uniformity. For metal CMP process, highly acidic slurry containing strong oxidizer is being used. It would affect the conditioner surface which normally made of metal such as Nickel and its alloy. If conditioner surface is corroded, diamonds on the conditioner surface would be fallen out from the surface. Because of this phenomenon, not only life time of conditioners is decreased, but also more scratches are generated. To protect the conditioners from corrosion, thin organic film deposition on the metal surface is suggested without requiring current conditioner manufacturing process. To prepare the anti-corrosion film on metal conditioner surface, vapor SAM (self-assembled monolayer) and FC (Fluorocarbon) -CVD (SRN-504, Sorona, Korea) films were prepared on both nickel and nickel alloy surfaces. Vapor SAM method was used for SAM deposition using both Dodecanethiol (DT) and Perfluoroctyltrichloro silane (FOTS). FC films were prepared in different thickness of 10 nm, 50 nm and 100 nm on conditioner surfaces. Electrochemical analysis such as potentiodynamic polarization and impedance, and contact angle measurements were carried out to evaluate the coating characteristics. Impedance data was analyzed by an electrical equivalent circuit model. The observed contact angle is higher than 90o after thin film deposition, which confirms that the coatings deposited on the surfaces are densely packed. The results of potentiodynamic polarization and the impedance show that modified surfaces have better performance than bare metal surfaces which could be applied to increase the life time and reliability of conditioner during W CMP.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

• The korean journal of orthodontics
• /
• v.24 no.2
• /
• pp.303-317
• /
• 1994

This study was designed to measure the changes in the titer of tooth root antibodies accompanying root resorption associated with orthodontic tooth movement in dogs to explore a role of the specific immune response in root resorption during orthodontic tooth movement. Five adult mongrel dogs, 2 years of age, were used in the study. Six lower incisors were extracted as sources of homologous antigen in the dogs. Tooth root antigen preparations were made from a 6M Guanidine-HCl-10% EDTA(pH5.0) extract of these root dentins. Root resorption was elicited by intrusion of six maxillary incisors with 200-250gm intrusive force. In 9th week, resorbing six maxillary anterior teeth were extracted. Serum samples were taken from each dog prior to intrusion and weekly for 11 consecutive weeks. Serum autoantibody titers were determined with an enzyme-linked immunosorbent assay. As controls for antibody specificity, sera which were previously incubated with tooth root antigen as well as sera to an unrelated bacterial antigen (Porphyromonas gingivalis 33277) for 3 hours at 25 were measured in all runs. Root resorption was monitored monthly using occlusal radiographs. And then root resorption patterns were observed with a zoom stereo microscope (Model SZH-121, Olympus optical Co. Ltd.). Incisors did not show clear radiographic evidence of significant and progressive root resorption, but periodontal ligament space had widened. But root resorption was observed on the apical regions of the maxillary incisors with a zoom stereo microscope. Teeth showed the shallow depression generally accompanying deep resorption. These demonstrate a slight tendency for an immediate decrease followed by rebound to levels above the pre-treatment baseline. A peak titer of autoantibody to dentin antigen occurred on day 28, then steadily decreased during the 9th week period as the roots resorbed and then rapidly spiked in animals when the resorbing teeth were extracted. When sera is incubated with tooth root antigen, serum activity in the ELISA was almost absent. This is because serum activity in the ELISA could be removed by absorption of the serum with dog dentin antigen. Serum ELISA activity to the unrelated bacterial antigen remained essentially unchanged in all animals throughout the experimental period. When the time course of changes in autoantibody to homologous tooth root antigen prepatration and unrelated bacterial antigen was compared, no significant differences were found(${\alpha}=0.05$). In general, the overall pattern of changes in autoantibody was similar to the two antigens. These findings suggest the possibility that these immunologic changes precede a significant development of root resorption lesions rather than merely reflecting their presence. Therefore, this suggests that the changes of antibody levels may have some predictive value for root resorption.

• Journal of The Korean Association For Science Education
• /
• v.33 no.2
• /
• pp.478-485
• /
• 2013

"GukMinSoHakDokBon", published in 1895, is the first national textbook designated by the Education Institute. Ten of the 41 chapters consist of scientific contents. In this thesis, some the contents are reviewed in detail and studied to see what significance it has in view of science education. The scientific contents described in "GukMinSoHakDokBon" include Plants Change, Clock, Camels, Wind, Hive, Respiration, Crocodiles, Nature of Animals, and Chemical Elements. For that kind of diversity, it was told that "GukMinSoHakDokBon" was not considered for normal students, and there were many ambiguities due to in sufficient explanations. Some of the contents were even technically wrong. So it has been noted that the scientific contents of "GukMinSoHakDokBon" have more significance in providing new information at that time but not in understanding newly-organized scientific knowledge. However, it is obvious that the early science education in Korea is composed of the methods of reading "GukMinSoHakDokBon". This is a common figure, which can be found in "Willson's Reader", the elementary reading textbook in the U.S. in the 1860's or "小學讀本" by the Ministry of Education in Japan. One thing remarkable is "GukMinSoHakDokBon" induced students' interests through the use of storytelling method for introducing some unfamiliar scientific knowledge. There is no doubt that "GukMinSoHakDokBon" has a very positive role in increasing students interest and intelligence. These advantages are being actively applied in the present model of storytelling education these days. Therefore, "GukMinSoHakDokBon" can be regarded as both a language textbook and an early figure in science education, and it can be also considered that "GukMinSoHakDokBon" has a significance not only in approaching scientific substances theoretically but in using storytelling methods to deliver unfamiliar and strange knowledges to students.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.4
• /
• pp.697-704
• /
• 1998

Background: Asthma is a chronic inflammatory disease of the airways characterized by a marked infiltration of eosinophils in the bronchial mucosa. Asthmatic bronchial mucosa produces many factors described as being chemotactic for inflammatory cells. IL-5, RANTES, and MCP-1 alpha are the chemotactic factors for eosinophils, but their roles are controversial. Recently eotaxin that is a potent eosinophil chemoattractant cytokine was detected in a guinea-pig model of allergic airway inflammation, and human eotaxin was cloned. Eotaxin is a specific chemoattractant for eosinophils, but its role in asthma is not confirmed. We examined the in vivo expression of eotaxin in bronchi of asthmatic patients. Methods : 11 asthmatics and 2 normal controls were enrolled. All subjects were underwent bronchoscopy with bronchial biopsies in 2nd or 3rd carina. RNA extraction from biopsy samples was done by acid-guanidium method. Semi-quantitaive RT-PCR was done for evaluation of eotaxin mRNA expression The extent of eosinophil infiltration was evaluated by counting the eosinophils in submucosa in HPF of microscope. Results : Eotaxin mRNA expressed in symptomatic, uncontrolled asthma. Steroid inhibited expression of eotaxin mRNA in asthma. Expression of eotaxin mRNA correlated with eosinophil infiltration in bronchial tissues. Conclusion: Expression of eotaxin mRNA increases in uncontrolled asthma and eotaxin is involved in the recruitment of eosinophils.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.206-214
• /
• 2005

Heterogeneously-catalyzed oxidation of aqueous phase trichloroethylene (TCE) over supported metal oxides has been conducted to establish an approach to eliminate ppm levels of organic compounds in water. A continuous flow reactor system was designed to effect predominant reaction parameters in determining catalytic activity of the catalysts for wet TCE decomposition as a model reaction. 5 wt.% $CoO_x/TiO_2$ catalyst exhibited a transient period in activity vs. on-stream time behavior, suggesting that the surface structure of the $CoO_x$ might be altered with on-stream hours; regardless, it is probable to be the most promising catalyst. Not only could the bare support be inactive for the wet decomposition reaction at $36^{\circ}C$, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. Very low TCE conversion appeared for $TiO_2$-supported $NiO_x$ and $CrO_x$ catalysts. Wet oxidation performance of supported Cu and Fe catalysts, obtained through an incipient wetness and ion exchange technique, was dependent primarily on the kinds of the metal oxides, in addition to the acidic solid supports and the preparation routes. 5 wt.% $FeO_x/TiO_2$ catalyst gave no activity in the oxidation reaction at $36^{\circ}C$, while 1.2 wt.% Fe-MFI was active for the wet decomposition depending on time on-stream. The noticeable difference in activity of the both catalysts suggests that the Fe oxidation states involved to catalytic redox cycle during the course of reaction play a significant role in catalyzing the wet decomposition as well as in maintaining the time on-stream activity. Based on the results of different $CoO_x$ loadings and reaction temperatures for the decomposition reaction at $36^{\circ}C$ with $CoO_x/TiO_2$, the catalyst possessed an optimal $CoO_x$ amount at which higher reaction temperatures facilitated the catalytic TCE conversion. Small amounts of the active ingredient could be dissolved by acidic leaching but such a process gave no appreciable activity loss of the $CoO_x$ catalyst.

• Management & Information Systems Review
• /
• v.36 no.3
• /
• pp.219-237
• /
• 2017

Looking into the top-five innovative sectors in Korea's manufacturing and service industries, this study empirically analyzes the effect of innovation performance on R&D investment, which is one of the most important strategic decisions for corporate management. In the midst of an uncertain business environment, R&D investment has been regarded as the most important strategic decision making in corporate management related to innovation. Corporate management, however, tend to be reluctant to make sufficient R&D investment due to the risk of an investment failure. Therefore, having R&D investment by offsetting this risk has been deemed as a key task for corporate management. However, prior studies have failed to identify which factors affect companies' strategic decision making on R&D investment. This study is to remedy this weakness of prior study. Relying on path dependency theory at organization-level and dominant logic at individual-level, this study empirically examines the multiple regression model, which sees entrepreneurial orientation as a positive mediator between innovation performance and R&D investment. The results found in the analysis of 242 local companies in the manufacturing and service sectors represent that innovation performance has a direct and positive effect on R&D investment, while it indirectly affects R&D investment through the mediating roles of entrepreneurial orientation. They also revealed that innovation performance had a meaningful impact on entrepreneurial orientation, which is an inclination to seek innovation, led to R&D investment. The founding of this study imply that innovation performance in the past affects innovation strategies in the future, and such a relationship could be strengthened by entrepreneurial orientation as the dominant logic of corporate management.