• Journal of Broadcast Engineering
• /
• v.19 no.3
• /
• pp.342-354
• /
• 2014

This paper deals with digital watermarking methods to protect ownership of image with targeting the ultra-high multi-view or free-view image service in which an arbitrary viewpoint image should be rendered at the user side. The main purpose of it is not to propose a superior method to the previous methods but to show how difficult to construct a watermarking scheme to overcome the viewpoint translation attack. Therefore we target the images with various attacks including viewpoint translation. This paper first shows how high the error rate of the extracted watermark data from viewpoint-translated image by basic schemes of the method using 2DDCT(2D discrete cosine transform) and the one using 2DDWT(2D discrete wavelet transform), which are for 2D image. Because the difficulty in watermarking for the viewpoint-translated image comes from the fact that we don't know the translated viewpoint, we propose a scheme to find the translated viewpoint, which uses the image and the corresponding depth information at the original viewpoint. This method is used to construct the two non-blind watermarking methods to be proposed. They are used to show that recovery of the viewpoint affect a great deal of the error rate of the extracted watermark. Also by comparing the performances of the proposed methods and the previous ones, we show that the proposed ones are better in invisibility and robustness, even if they are non-blind.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.805-811
• /
• 2012

The reliability based design optimization (RBDO) approach requires high computing cost to consider uncertainties. In order to reduce the design cost, the single loop single vector (SLSV) approach has been developed for RBDO. This method can reduce the cost in calculating deign sensitivity by elimination of the nested optimization process. However, this process causes the increment of the instability or inaccuracy of the method according to the problem characteristics. Therefore, the method may not give accurate solution or the robustness of the solution is not guaranteed. Especially, when the function is concave, the process frequently diverges. In this research, the concept of the conjugate gradient method for unconstrained optimization is utilized to develop a new single loop single vector method. The conjugate gradient is calculated with gradient directions at the most probable points (MPP) of previous cycles. Mathematical examples are solved for the verification of the proposed method. The numeri cal performances of the obtained results are compared to those of other RBDO methods. The SLSV approach using conjugate gradient is not greatly influenced by the problem characteristics and improves its convergence capability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.435-442
• /
• 2017

A catadioptric optical system produces images by refraction and reflection. To improve the image quality, the shape of the secondary mirror supporters should be determined to ensure that the centering error and tilt of secondary mirror are very small, and the main mirror receives the maximum amount of light. Furthermore, random acceleration vibration has a severe effect on the optical system for observation reconnaissance. In order to obtain the best design under these circumstances, the volume of the secondary mirror supporter must be minimized while satisfying the constraints expressed in standard deviations of the centering error and tilt. It is difficult to analytically calculate the design sensitivities of the standard deviations, because they are statistically defined. Hence, after their second-order regression equations were determined using a response surface methodology, an optimal geometric design was obtained. As a result, it was found that the method proposed in this paper, which included a random vibration analysis, was effective in obtaining the optimal design for a secondary mirror supporter with robustness.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.86-92
• /
• 1993

자동차의 현가장치에 대한 능동제어연구는 국내외적으로 활발히 진행되어 왔다. 수동식현가장치는 단순히 스프링과 감쇠기로 차체의 진동을 수동 제어 하므로 성능 향상에 한계가 존재하게 된다. 수동식 현가장치가 강성계수와 감쇠계수를 조절함으로써 차체로 들어오는 진동을 억제하는 반면, 능동식제 어는 보통 유압을 이용하여 효율적으로 차체에 들어오는 진동을 억제시키게 된다. 일반적으로 자동차가 능동현가장치 설계시 요구되는 사항은 탑승자의 승차감, 조종성, 현가장치의 공간확보 문제, 경제성(제어력), 실제적으로 자동 차에 적용할 수 있는 능동제어기법인가 하는 문제이다. 자동차 능동식 현가 장치는 보통 1/4 car (2자유도계), Full-car 모델 (7자유도계) 등으로 모델링 을 하여 능동제어기를 설계한다. 1/4 car 모델의 특징은 해석이 비교적 단순 하고 현가장치의 동적거동을 이해하는데 유용하고 실험을 하거나 실제 자동 차에 적용하기 쉬운 반면에 Full-car 모델에 비해 제어력의 효율이 떨어진다 는 단점이 있다. 그 이유는 1/4 car 모델은 차체의 동역학적 특성을 고려하 여 설계하지 않았기 때문에 4개의 독립현가차축에서는 오직 그 현가축방향 으로 발생하는 수직방향의 진동만을 제어하기 때문이다. 따라서 동역학적 역 성에 기인하는 운동을 제어하는 비효율적인 제어력이 공급된다는 단점을 갖 는다. 이에 비해 full-car 모델은 주행모드(수직, 롤링, 피칭운동)간의 연성을 고려하여 제어기를 설계할 수 있기 때문에 1/4 car 모델에 비해 제어력의 효 율이 높다는 장점이 있는 반면에 모델이 수학적으로 복잡하므로 제어력을 구하는데 계산량이 많고, 실제 자동차에 적용하기에 복잡하다는 단점을 갖고 있다. 따라서 본 논문에서는 쉽게 실험할 수 있고, 실용화할 수 있는 1/4 car 모델에 대하여 능동제어기를 설계하여 실제자동차에 능동제어기를 적용할 때 참고가 될 수 있도록 하였다. 자동차는 저주파영역의 밴드통과필터 역할 을 하므로 저주파에서의 성능, 특히 탑승자가 민감하게 느끼는 0.5Hz - 10Hz 부근의 주파수성능은 승차감, 조종성에 상당히 중요하다. 이에 본 논문 에서는 0.5Hz - 10Hz 부근의 승차감, 조종성의 향상에 초점을 두고 차체의 속도를 출력변수로 한 LQG/LTR 제어기를 설계하였다. LQG/LTR 설계기법 은 안정도-강인성이 좋은 체계적인 설계기법으로서 전 상태를 측정할 필요 가 없으므로 실제 적용시 효과적이다. 또한 자동차의 제원의 변화에 대한 고 유치의 민감도해석과 새로운 개념으로 안정도-강인성(Robustness)해석을 하 여 수동시스템과 능동시스템의 강인성을 비교하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6299-6303
• /
• 2012

Insulin-like growth factor-binding protein-3 (IGFBP3) has been identified as a putative tumor suppressor with multifunctional roles in the IGF axis. Recently, there have been a growing body of studies investigating the relation between the IGFBP3 A-202C polymorphism, circulating IGFBP3 and prostate cancer risk, but their outcomes varied leading to controversy. Hence, it is necessary to perform a meta-analysis covering all eligible studies to shed a light on the association of IGFBP3 A-202C and cancer risk. Finally, we included a total of 11 relevant articles between 2003 and 2010 covering 14 case-control studies including 9,238 cases and 8,741 controls for our analysis. Our results showed that A-202C was a marginal risk factor of prostate cancer (allele contrast: OR=1.08, 95% CI :1.01-1.16; dominant model: OR=1.11, 95% CI :1.01-1.22; heterozygote codominant model: OR=1.11, 95% CI :1.03-1.18; homozygote contrast: OR=1.19, 95% CI :1.03-1.37). Stratification analysis revealed that sample size and control source were two major heterogeneous meta-factors especially in the recessive model (source: Population-based control group :p=0.30,I2=16.7%, Hospital-based control group: p=0.20, I2=30.3%; sample size: Small: p=0.22,I2= 32.8%, Medium: p=0.09,I2=48%, Large p=0.60,I2=0.0%); However, contrary to previous findings, no significance was found in racial subgroups. No significant publication bias was found in our analysis. Considering the robustness of the results and the discrepancy among some studies, there might be some unsolved confounding factors, and further more critical large studies are needed for confirmation.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.378-384
• /
• 2013

We have investigated the electrical characteristics of SCR(Silicon Controlled Rectifier)-based ESD power clamp circuit with high holding voltage and dual-directional ESD protection cells for a whole-chip ESD protection. The measurement results indicate that the dimension of n/p-well and p-drift has a great effect on holding voltage (2V-5V). Also A dual-directional ESD protection circuit is designed for I/O ESD protection application. The trigger voltage and the holding voltage are measured to 5V and 3V respectively. In comparison with typical ESD protection schemes for whole-chip ESD protection, this ESD protection device can provide an effective protection for ICs against ESD pulses in the two opposite directions, so this design scheme for whole-chip ESD protection can be discharged in ESD-stress mode (PD, ND, PS, NS) as well as VDD-VSS mode. Finally, a whole-chip ESD protection can be applied to 2.5~3.3V VDD applications. The robustness of the novel ESD protection cells are measured to HBM 8kV and MM 400V.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.97-102
• /
• 2020

This paper relates with the Hybrid-SE-MMA (Signed-Error MMA) that is possible to improving the equalization performance by using the adaptive modulus and adaptive step size in SE-MMA adaptive equalizer for the minimizing the intersymbol interference. The equalizer tap coefficient is updatted use the error signal in MMA algorithm for adaptive equalizer. But the sign of error signal is used for the simplification of arithmetic operation in SE-MMA algorithm in order to updating the coefficient. By this simplification, we get the fast convergence speed and the reduce the algorithm processing speed, but not in the equalization performance. In this paper, it is possible to improve the equalization performance by computer simulation applying the adaptive modulus to the SE-MMA which is proposional to the power of equalizer output signal. In order to compare the improved equalization performance compared to the present SE-MMA, the recovered signal constellation that is the output of the equalizer, residual isi, MD(maximum distortion), MSE and the SER perfomance that means the robustness to the external noise were used. As a result of computer simulation, the Hybrid-SE-MMA improve equalization performance in the residual isi and MD, MSE, SER than the SE-MMA.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.29-45
• /
• 2017

Ad hoc sensor network is characterized by decentralized structure and ad hoc deployment. Sensor networks have all basic features of ad hoc network except different degrees such as lower mobility and more stringent energy requirements. Existing protocols provide different tradeoffs among some desirable characteristics such as fault tolerance, distributed computation, robustness, scalability and reliability. wireless protocols suggested so far are very limited, generally focusing on communication to a single base station or on aggregating sensor data. The main reason having such restrictions is due to maximum lifetime to maintain network activities. The network lifetime is an important design metric in ad hoc networks. Since every node does a router role, it is not possible for other nodes to communicate with each other if some nodes do not work due to energy lack. In this paper, we suggest an experimental ad-hoc on-demand distance vector routing protocol to optimize the communication of energy of the network nodes.The load distribution avoids the choice of exhausted nodes at the route selection phase, thus balances the use of energy among nodes and maximizing the network lifetime. In transmission control phase, there is a balance between the choice of a high transmission power that lead to increase in the range of signal transmission thus reducing the number of hops and lower power levels that reduces the interference on the expense of network connectivity.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.2
• /
• pp.45-53
• /
• 2002

A wavelet-based digital watermarking algorithm is proposed that uses the successive subband quantization and human visual system (HVS). After an original image is decomposed into 4-level by the discrete wavelet transform, perceptually significant coefficients (PSC) of each subband excluding the lowest level subband are utilized to embed the watermark. PSC of the baseband ate chosen according to their amplitude and they are slightly modified to embed the watermark by a conventional embedding method. By the successive subband quantization, PSC of the high frequency subband are chosen and slightly modified according to the HVS. We tested the performance of the proposed algorithm compared with the conventional watermarking algorithm by computer simulation. Experimental results show that the proposed watermarking algorithm produces a better invisibility and robustness than the conventional algorithm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.75-87
• /
• 2010

For two input-protection schemes suitable for RF ICs utilizing the thyristor and diode protection devices, which can be fabricated in standard CMOS processes, we attempt an in-depth comparison on HBM ESD robustness in terms of lattice heating inside protection devices and peak voltages developed across gate oxides in input buffers, based on DC, mixed-mode transient, and AC analyses utilizing a 2-dimensional device simulator. For this purpose, we construct an equivalent circuit for an input HBM test environment of a CMOS chip equipped with the input ESD protection circuits, which allows mixed-mode transient simulations for various HBM test modes. By executing mixed-mode simulations including up to six active protection devices in a circuit, we attempt a detailed analysis on the problems, which can occur in real tests. In the procedure, we suggest to a recipe to ease the bipolar trigger in the protection devices and figure out that oxide failure in internal circuits is determined by the junction breakdown voltage of the NMOS structure residing in the protection devices. We explain the characteristic differences of two protection schemes as an input ESD protection circuit for RF ICs, and suggest valuable guidelines relating design of the protection devices and circuits.