• 전력전자학회논문지
• /
• 제11권5호
• /
• pp.404-408
• /
• 2006

본 논문에서는 복소 벡터 동기 좌표계 비례 적분(PI) 전류 제어기의 안티 와인드업(anti-windup)이득 설정에 대해 논의한다. 복소 벡터 동기 좌표계 비례 적분 전류 제어기는 시스템 제정수 변동에 기존의 비례 적분 전류 제어기 보다 더 강인한 특성을 보인다. 복소 벡터 전류 제어기 역시 적분기를 포함하고 있으며, 엑츄에이터(actuator)의 물리적인 한계로 전압이 포화되는 경우에는 안티 와인드업이 필요하게 되고, 적절치 못한 안티 와인드업 이득 설정은 제어 시스템의 동특성을 저하시킬 수 있다. 따라서 복소 벡터 동기 좌표계 비례 적분 전류 제어기에 적합한 안티 와인드업 이득을 제안하였고, 제안된 알고리즘의 유효성은 실험을 통하여 검증하였다.

• 대한기계학회논문집A
• /
• 제29권5호
• /
• pp.777-785
• /
• 2005

The swing motion control problem of a container hanging on the trolly is considered in the paper. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration, deceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, many trolley motion control strategies are introduced and applied. In this paper, we introduce and synthesize a swing motion control system in which a small auxiliary mass is installed on the spreader made by ourselves. In this control system, the actuator reacting against the auxiliary mass applies inertial control forces to the container to reduce the swing motion in the desired manner. In many studies, the controllers used to suppress the vibration have been synthesized for the given mathematical model of plants. And, the designers have not been able to utilize the degree of freedom to adjust the structural parameters for the control object. To overcome this problem, so called 'Structure/control Simultaneous Method' is used. In this paper, the simultaneous design method is used to determine the optimum weight of moving mass such that the optimal system performance would be achieved. And the experimental result shows that the proposed control strategy is useful to the case of that the controlled system is exposed to the uncertainties and, robust to the unexpected disturbance inputs.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.263-270
• /
• 1996

본 연구에서는 여러개의 원판형 압전소자가 부착된 판구조물의 소음제어를 다루었다. 판재의 아래에는 소음원이 위치하고 이 소음원은 판재를 가진한다. 구조물 및 압전소자는 3차원 요소, 구조물 요소 및 천이요소의 조화로 이루어지는 유한요소로 모델링 되었다. 최적화 과정의 목적함수는 구조물로부터 복사되는 소음 에너지이고 설계변수는 원판형 압전소자의 위치, 크기 및 인가되는 전압이 사용되었다. 최적설계과정에서 요구되는 자동격자형성이 언급되었다. 구조물의 공진 및 비공진 주파수에서 최적설계가 행해졌으며 괄목할 만한 소음감소를 얻었다. 이 결고는 음향 하중의 형태가 다르게 변하더라도 크게 변하지 않는 것이 밝혀졌다. 또한 한 주파수 뿐 아니라 넓은 주파수 영역에서도 압전가진기의 전압을 조정함으로써 좋은감소를 얻을 수 있다.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.45-53
• /
• 2009

Today, reduction of $CO_2$ exhaustion gas for global-warming prevention becomes important issues in all industrial fields. Hydraulic systems have been widely used in industrial applications due to high power density and so on. However hydraulic pump is always being operated by engine or electric motor in the conventional hydraulic system. Therefore most of the conventional hydraulic system is not efficient system. Recently, an electro-hydraulic hybrid system, which combines electric and hydraulic technology in a compact unit, can be adapted to a wide variety of force, speed and torque requirements. In the electro-hydraulic hybrid system, hydraulic pump is operated by electric motor only when hydraulic power is needed. Therefore the electro-hydraulic system can reduce the energy consumption drastically when compared to the conventional hydraulic systems. This paper presents a new kind of hydraulic load simulator which is composed of electro-hydraulic hybrid system. Disturbances in the real working condition make the control performance decrease or go bad. QFT controller is designed to eliminate or reduce the disturbance and improve the control performance of the electro-hydraulic load simulator. Experimental results show that the proposed controller is verified to apply for electro-hydraulic hybrid system with varied external disturbances.

• 동력기계공학회지
• /
• 제16권2호
• /
• pp.66-74
• /
• 2012

In this paper, the authors propose a new approach to control a barge type surface vessel. It is based on the Dynamic Positioning System(DPS) design. The main role of barge ship is to carry and supply the materials to the floating units and other places. To carry out this job, it should be positioned in the specified area. However sometimes the thrust systems are installed on it, and in general the rope control by mooring winch system is used. It may be difficult to compare the control performances of two types. If we consider this problem in point of usefulness, we can easily find out that the winch control system is more useful and applicable to the real field than the thrust control system except a special use. Therefore, in this paper we consider a DPS design problem which can be extended to the many application fields. The goal of this paper is twofold. First, the sliding mode controller (SMC) for positioning the our vessel is proposed. Especially, in this paper, a robust stability condition is given based on descriptor system representation. In the result, the sliding mode control law guarantees to keep the vessel in the defined area in the presence of environmental disturbances. And second, the thrust allocation problem is solved by using redistributed pseudo-inverse (RPI) algorithm to determine the thrust force and direction of each individual actuator. The proposed approach has been simulated with a supply vessel model and found work well.

• 한국해양공학회지
• /
• 제19권3호
• /
• pp.66-73
• /
• 2005

The sway motion control problem of a container hanging on the trolley is considered in this paper. In the container crane control problem, the main issue involves suppressing the residual swing motion of the container at the end of acceleration, during deceleration, or for an unexpected disturbance input. For this problem, in general, many trolley motion control strategies are introduced and applied. In this paper, we introduce and synthesize a swing motion control system, in which a small auxiliary mass is installed on the spreader. In this control system, the actuator reacting against the auxiliary mass applies inertial control forces to the container to reduce the swing motion in the desired manner. In many studies, the controllers used to suppress the vibration have been synthesized for the given mathematical model of plants. In many cases, the designers have not been able to utilize the degree of freedom to adjust the structural parameters for the control object. To overcome this problem, so called "Structure/Control Simultaneous Method" is used. From this, in this paper the simultaneous design method is used to achieve optimal system performance. And the experimental result shows that the proposed control strategy is useful, to the case of that the controlled system is exposed to the uncertainties and, robust to disturbances like wind.

• 한국항공우주학회지
• /
• 제41권5호
• /
• pp.342-349
• /
• 2013

무인항공기가 외형손상을 입는 경우, 비행역학 특성이 변하기 때문에 손상 이전 설계된 제어기는 더 이상 안정적인 제어성능을 보장하지 않는다. 본 논문에서는 주익의 손상이 일어난 무인항공기에 대해서도 강건한 제어성능을 보장하는 신경회로망 적응제어기법을 소개한다. 구동기의 특성에 의한 제어기의 성능저하를 방지하기 위해 Pseudo Control Hedging (PCH)를 추가적으로 사용하였다. 기체고정좌표계의 중심이 항공기의 무게중심에 위치하지 않는 비대칭 동역학을 사용하였으며, 전익형 무인기를 대상 비행체로 하였다. 날개가 손상되지 않은 모델과 손상된 모델의 풍동시험을 통해 얻은 공력데이터를 이용하여 시뮬레이션을 수행하였다. 시뮬레이션의 결과를 통해 제안된 제어기법이 주익의 손상이 발생한 항공기에 대해서도 여전히 안정적인 조종성능을 보장하는 제어기법임을 검증하였다.

• 대한기계학회논문집A
• /
• 제36권10호
• /
• pp.1171-1179
• /
• 2012

본 논문에서는 선박운동제어를 위한 제어시스템 설계문제에 대해 고찰한다. 특히 강인한 추종성능을 가진 2자유도 서보계 설계법을 이용하여 선박의 위치 및 자세제어를 위한 제어기를 설계하고, 실험 등의 실제적인 제어시스템 구축시 센서로부터 모든 정보를 획득할 수 없으므로 이에 필요한 상태를 추정하기 위한 관측기 설계 문제에 대해 고려하고 있다. 그래서 본 논문에서는 실제 상태정보와 추정된 상태정보와의 오차를 최소화하도록 $H_{\infty}$ 오차 바운드를 설정하는 기법으로 관측기의 이득을 구한다. 특히 $H_{\infty}$ 오차 바운드를 만족하는 관측기가 존재하기 위한 조건을 LMI형식으로 변환하여 표현함으로써 관측기 이득 계산을 효율적으로 수행하여 최적의 이득을 구할 수 있음을 보이고 시뮬레이션을 통해 그 유용성을 확인한다.

• 제어로봇시스템학회논문지
• /
• 제14권3호
• /
• pp.284-294
• /
• 2008

In this paper, we describe an implementation of small mobile robot that can be used at research and application of mobile sensor networking. This robot that will constitute the sensor network, as a platform of multi-robot system for each to be used as sensor node, has to satisfy restrictions in many aspects in order to perform sensing, communication protocol, and application algorithms. First, the platform must be designed with a robust structure and low power consumption since its maintenance after deployment is difficult. Second, it must have flexibility and modularity to be used effectively in any structure so that it can be used in various applications. Third, it must support the technique of wireless network for ubiquitous computing environment. At last, to let many nodes be scattered, it must be cost-effective and small. Considering the above restrictions of the mobile platform for sensor network, we designed and implemented robots control the current of actuator by using additional circuit for power efficiency. And we chose MSP430 as MCU, CC2420 as RF transceiver, and etc, that have the strength in the aspect of power. For flexibility and modularity, the platform has expansion ports. The results of experiments are described to show that this robot can act as sensor node by RF communication process with Zigbee standard protocol, execute the navigation process with simple obstacle avoidance and the moving action with RSSI(Received Signal Strength Indicator), operate at low-power, and be made with approx. $100.

• 제어로봇시스템학회논문지
• /
• 제12권9호
• /
• pp.926-934
• /
• 2006

This paper proposes intelligent control of a virtual walking machine that can generate infinite floor for various surfaces and can provide proprioceptive feedback of walking to a user. This machine allows users to participate in a life-like walking experience in virtual environments with various terrains. The controller of the machine is implemented hierarchically, at low-level for robust actuator control, at mid-level fur platform control to compensate the external forces by foot contact, and at high-level control for generating walking trajectory. The high level controller is suggested to generate continuous walking on an infinite floor for various terrains. For the high level control, each independent platform follows a man foot during the swing phase, while the other platform moves back during single stance phase. During double limb support, two platforms manipulate neutral positions to compensate the offset errors generated by velocity changes. This control can, therefore, satisfy natural walking conditions in any direction. Transition phase between the swing and the stance phases is detected by using simple switch sensor system, while human foot motions are sensed by careful calibration with a magnetic motion tracker attached to the shoe. Experimental results of walking simulations at level ground, slope, and stairs, show that with the proposed machine, a general person can walk naturally on various terrains with safety and without any considerable disturbances. This interface can be applied to various areas such as VR navigations, rehabilitation, and gait analysis.