• 한국산업융합학회 논문집
• /
• 제17권1호
• /
• pp.7-14
• /
• 2014

In this study, characteristic of elastic paving materials in bicycle road using polyurethane were studied experimentally. As a results, following their good result was obtained. Bicycle road packaging materials are flexural strength g test, ratio of mass change after freezing and thawing, repulsion elasticity test, water Permeation coefficient test and slip resistance test results showed good performance.

• 한국산업보건학회지
• /
• 제28권3호
• /
• pp.257-266
• /
• 2018

Objectives: The objective of this study was to evaluate asphalt fumes and PAHs exposure among asphalt road paving workers. Methods: Task-based personal air samplings(n=41) were carried out in 3 asphalt road paving construction sites using PTFE (polytetrafluorethylene) filters for asphalt fume and XAD-2 with glass fiber filters for PAHs. The concentration of fumes and PAHs were showed by four different job(paver finisher operator, paving laborer(raker), macadam roller operator and tire roller operator). Results: The geometric mean(GM) concentration of asphalt fumes as benzene soluble aerosol was highest at paving laborers($42.32{\mu}g/m^3$), followed by in order, paver finisher operators($41.57{\mu}g/m^3$), macadam roller operators($31.9{\mu}g/m^3$), and tire roller operators($30.31{\mu}g/m^3$). The GM of total PAHs concentration was highest at paver finisher operators($37.5{\mu}g/m^3$), followed by in order, paving laborers($20.13{\mu}g/m^3$), tire roller operators($8.66{\mu}g/m^3$), and macadam roller operators($6.23{\mu}g/m^3$). The results of the evaluation of 16 compounds of PAHs showed that the concentrations of naphthalene, achenaphthylene, achenaphthene, pyrene, fluorene and benz (a) anthracene was higher than those of other PAHs compounds and as the carcinogenic substances, benzo(a)pyrene, and debenz(a,h) anthracene were detected. The benzo(a)pyrene equivalent concentration(BaPeq) was $2.81{\mu}g/m^3$ at paver finisher operators, $2.07{\mu}g/m^3$ at paving laborers, $0.41{\mu}g/m^3$ at tire roller operators and $0.22{\mu}g/m^3$ at macadam roller operators. Asphalt road paving workers have higher benzo(a)pyrene equivalent(BaPeq) values even though at lower total PAHs concentration than workers in steel pipe coating and tar industry. Conclusions: Asphalt road paving workers were found to have risk of carcinogen exposure due to higher Benzo(a)pyrene equivalent concentration(BaPeq) than other PAHs exposure occupations. This study confirmed the carcinogenic hazards among asphalt paving workers.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.1-6
• /
• 2018

PURPOSES : The objective of this study is to evaluate of the effect of thermal segregation reduction in asphalt paving using material transfer vehicles (MTVs). METHODS : Asphalt paving using MTVs was carried out, and the paved surface temperature was measured using an infrared camera. The amount of thermal segregation was estimated from temperature variations. RESULTS : The transportation of hot mix asphalt (HMA) using dump trucks caused temperature segregation that persisted in the paving surface if an MTV was not used. The average temperature variation was 8.58% in paved surfaces where an MTV was not used. However, the temperature variation was 3.10%, 2.86%, and 4.53% for the base layer, inter-layer, and surface layer, respectively, when an MTV was used. CONCLUSIONS : The use of an MTV in asphalt paving reduces thermal segregation approximately 2.3 times in an asphalt mat via a remixing process and also allows for a smoother work process because the paver never needs to stop to receive HMA. However, MTV equipment without pre-heating devices requires careful temperature control during the warm up process at the MTV during construction in the winter.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.155-156
• /
• 2020

Unlike new construction projects, road paving maintenance work shows large productivity discrepancies depending on the conditions of the worksite. The current construction cost calculation scheme, however, only provides daily construction volume categorized by work scope and scale: There are no detailed standards that can be implemented on various types of worksites. To develop standards that enable the calculation of appropriate construction costs by taking into account worksite conditions, the current study conducted on-site surveys and interviews. The on-site research and analysis revealed that location, construction width, the day's worksite lot, work scope, and construction objectives were found to cause differences in construction volume. In addition to the existing work scope and work scape variables, the current study added weight constants reflecting the daily work volume based on movement conditions at site and the size of the worksite lot. In this process, the current study found that even one type of construction project can have fifteen different levels of daily construction volume. Such detailed classification was deemed to enable the proper calculation of construction costs based on worksite conditions.

• 한국산림과학회지
• /
• 제106권1호
• /
• pp.70-76
• /
• 2017

임도포장공법 중 현재 많이 시공되는 콘크리트 포장은 하부지반의 침식으로 인해 균열이 많이 발생하며, 경사가 급한 경우 결빙으로 인하여 임도로서 역할을 수행할 수 없으며, 그리고 콘크리트가 갖고 있는 유해성(6가 크롬 등) 때문에 산림을 건강의 목적으로 생각하는 국민정서에 반하는 단점이 있다. 이러한 측면에서 본 연구는 콘크리트 포장의 문제점을 보완하기 위해 친환경 고화재를 이용하여 경북 고령군 쌍림면에 시설된 임도 85 m에 시험포장을 실시하여 임도포장의 공정과 비용, 강도와 다짐도를 조사하였다. 임도포장공정은 요소작업별로 준비작업, 노면 터파기, 노면 고르기, 하부지반 다짐, 거푸집 설치, 유용토 채취 및 선별, 믹싱, 포설, 다짐, 양생으로 이루어지며, 일위대가를 통한 개략적인 단가산출을 한 결과 콘크리트 포장의 경우는 일반적으로 노무비, 재료비, 경비를 합한 총 38,681원/$m^3$, 친환경 고화재의 경우 총 합계 38,245원/$m^3$으로 시공비용은 비슷하게 나타났다. 또한 양생기간에 따른 강도 특성을 알아보기 위하여 비파괴시험인 슈미트 해머 시험을 실시한 결과 양생기간 7일은 10.5~13.5 MPa, 14일은 18.1~22.7 MPa, 28일은 20.8~23.0 MPa로 양생기간 14일에서 강도증가 폭이 가장 높게 나타났다.

• 한국전기전자재료학회논문지
• /
• 제29권5호
• /
• pp.274-278
• /
• 2016

A road energy harvester was designed and fabricated to convert mechanical energy from the vehicle load to electrical energy. The road energy harvester is composed of 20 piezoelectric materials. This study attempted to evaluate output depending on pavement materials when paving road piezoelectric energy harvester in the road. Harvester is the bender type and is the method of supporting the both ends of piezoelectric material and applying the load in the middle part. Harvester was paved in the type paved with asphalt, type paved with cement and in the exposed type not covering the top of harvester. The output characteristics were compared and evaluated depending on changes in vehicle load and vehicle speed changes. As vehicles, truck (11.9 ton), SUV(1.6 ton) and sedan (1.5 ton) were used and the output characteristics when driving at the interval of 10 km/h from 10 km/h to 100 km/h were evaluated.

• 한국도로학회논문집
• /
• 제13권3호
• /
• pp.31-38
• /
• 2011

주된 도시들의 불투수성 포장화에 따른 현상으로 토양의 사막화를 일으키고 있으며, 나아가, 도시 온난화 현상을 발생시켜 도시지역의 평균 온도를 올리는 원인이 되고 있다. 이로 인해 우수가 투수성 토양에 흡수되거나 잔류되어야 하는 양이 줄어듦에 따라 자주 도심지내에서 범람이 되는 현상을 보여주고 있다. 결국은 우수시스템이 제대로 작동하지 않고 침식이 발생하고 있다. 투수성 포장시스템과 관련해서는 블록 포장이 여러 군데서 수년 동안 사용되어 왔다. 또한 투수성 블록 포장은 전통적으로 사용된 아스팔트 포장 및 콘크리트 포장에 비해 다양한 형태로 사용될 수 있는 장점과 더불어 타 포장보다 미적으로 낳은 면을 보여 주고 있다. 따라서 도로의 현장 조건을 모사하기 위해 본 연구에서는 실험용 슬러지 및 휠 트래킹 장비를 이용한 블록 포장의 기능적인 투수성 평가를 실시하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.614-625
• /
• 2008

The project of Construction of Siem Reap bypass road in Cambodia consists of alignment improvement of existing route, extension of width of road and laterite paving. This project is carried out by fast-track method on the design and construction for bypass road of 15.2 km length and 8m width for five months. Though some difficulties for the construction works such as the location of borrow pit and rock source, rainy seasons etc, the construction could be completed successfully owing to the cooperation of related authorities, company and residents. This 2 way Angkor detouring road will function as industrial roads in Siemreap region. These new two roads will not only bring better logistics requirements and safety, but also impact to poverty alleviation and preservation the beauty of the ecological environment of Angkor region. The basic information related to geotechnical engineering of this project is introduced.

• 콘크리트학회지
• /
• 제28권4호
• /
• pp.46-50
• /
• 2016

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2010년 추계학술대회 논문집
• /
• pp.167-170
• /
• 2010