• Journal of Forest and Environmental Science
• /
• 제30권1호
• /
• pp.56-61
• /
• 2014

Macroscopic and microscopic characteristics of Yellow-hearted pine and Red pine were investigated. Wood color, annual ring width and latewood percentage were observed by the naked eye. Anatomical properties as the structure of three sections and cell dimensions were examined by an optical microscopy. As a result, the color of bark in Yellow-hearted pine was Reddish-grey, and Red pine showed brown or gray. The color of heartwood and sapwood in Yellow-hearted pine was deep-yellow to brown and creamy-white. And the color of heartwood and sapwood in Red pine was light-brown and light-yellow. The annual ring width of Yellow-hearted pine was narrower than that of Red pine, and the latewood percentage of Yellow-hearted pine was a little higher than that of Red pine. There was no significant difference in the anatomical characteristics between Yellow-hearted pine and Red pine.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.161-164
• /
• 2002

This paper presents an 1-D substrate resistance value expression and compares the measured wave-form data with the calculated 1-D resistance network model. The remaining part is devoted to the effectiveness of guard ring varying its width and number.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1275-1277
• /
• 1995

We designed and constructed an extremly high power s-band traveling wave resonator for the test of high power microwave components using 80MW pulsed klystron with $4{\mu}s$ pulse width. The 10dB directional coupler for the input power coupling was used, and the ring consists of phase shifter, tuner, H-band, and other microwave components. The designed total electrical length of the system is 10 times of the waveguide wavelength, ${\lambda}_g$=15.3cm, and the measured total insertion loss is 0.15dB. The low power test measurment showed the power multiplication of 14.69. The design goal is to achieve the peak power of 300MW, pulse width $4{\mu}s$ with 30 pulse repetition rate. In this article we discuss the treveling wave resonant ring constructed at the PAL laboratory together with the test results.

• 한국강구조학회 논문집
• /
• 제29권1호
• /
• pp.61-71
• /
• 2017

GFRP와 강관으로 구성된 합성형 보강링 대하여 설계를 진행하고 휨거동을 분석하여 실험 결과 및 유한요소해석 프로그램인 ABAQUS를 통한 결과와 비교하였다. GFRP 합성단면에 대한 유효폭을 ABAQUS beam모델과 이론값을 이용하여 검증하였으며, 또한 항복정도에 따라 변화하는 GFRP 보강링의 이론적인 변형률 값을 이용하여 항복하중, 균열하중, 극한하중을 구하여 실험결과와 비교하고 ABAQUS solid 모델을 이용하여 중립축의 변화를 확인하였다.

• 한국가구학회지
• /
• 제10권2호
• /
• pp.55-61
• /
• 1999

This research was carried out to investigate the fundamental properties such as the structure of annual ring, density distribution, compressive strength with parallel to grain, relative crystallinity, and microfibril angle of Gumgangsong(Pinus densoflora for. erecta Uyeki). The wood specimens, Gumgangsong and Sonamu(Pinus densiflora S. et Z.), for this experiment were prepared at Ulijingoon Sokwangri and Kyungpook university's forest in Kyungpook province, respectively. Average annual ring width is $2.0mm{\pm}0.3$ in heartwood of Gumgangsong. The respectively of heart wood was over 60 percent in Gumgangsong and 20~50 percent in Sonamu. Heartwood density were ranged from 0.5 to $0.8{\;}g/cm^3$ in Gumgangsong and from 0.4 to $0.5{\;}g/cm^3$ in sonamu. Compressive strength in Gumgangsong and Sonamu was about $30{\pm}5MPa$ and $25{\pm}5MPa$, resepectively. But the relative crystallinity and microfibril angle of two species were not different clearly. From these results of Gumgangsong and Sonamu, therefore, it was considered the main difference factors for both species were annual ring width and heartwood percentage.

• 융합신호처리학회논문지
• /
• 제12권4호
• /
• pp.341-347
• /
• 2011

본 논문에서는 유효 빔 폭 개념을 새로이 도입하여 중첩 초음파 센서 링의 성능 평가, 최적 설계, 그리고 복합 장애물 탐지에 대해 기술하도록 한다. 일군의 동종 저지향성 초음파 센서들이 반경이 영이 아닌 원주 상에 일정 간격으로 상호 빔 폭이 중첩되도록 배치된다고 가정한다. 첫째, 중첩 초음파 센서 링의 전역 위치 불확실성을 전체 장애물 탐지 범위 내에서의 국부적 위치 불확실성의 평균값으로 나타낸다. 중첩 초음파 센서 링의 유효 빔 폭을 동일한 전역 위치 불확실성을 갖는 단일 초음파 센서의 빔 폭으로 산정하고 이를 바탕으로 정규화된 장애물 탐지 성능 평가 지수를 정의한다. 둘째, 정의된 성능 평가 지수를 이용하여 장애물 탐지 시 위치 불확실성이 최소화되도록 중첩 초음파 센서 링의 설계 사양을 최적화한다. 주어진 초음파 센서의 사용 개수에 대한 중첩 초음파 센서 링의 최적 반경 그리고 주어진 중첩 초음파 센서 링의 반경에 대한 초음파 센서의 최적 사용 개수를 결정한다. 셋째, 3개의 인접 초음파 센서로부터의 장애물 거리 간의 대소 관계에 의거한 복수 장애물의 위치 불확실성 영역 판정 기준을 제시한다. 제시된 위치 불확실성 영역판정 기준을 이용하여 다양한 형태의 장애물로 구성된 복합 장애물 환경에서의 장애물 윤곽 추출 결과를 보인다.

• 한국전기전자재료학회논문지
• /
• 제30권3호
• /
• pp.148-151
• /
• 2017

This research concerns field rings for 3.3kV planar gate power insulated-gate bipolar transistors (IGBTs). We design an optimal field ring for a 3.3kV power IGBT and analyze its electrical characteristics according to field ring parameters. Based on this background, we obtained 3.3kV high breakdown voltage and a 2.9V on state voltage drop. To obtain high breakdown voltage, we confirmed that the field ring count was 23, and we obtained optimal parameters. The gap distance between field rings $13{\mu}m$ and the field ring width was $5{\mu}m$. This design technology will be adapted to field stop IGBTs and super junction IGBTs. The thyristor device for a power conversion switch will be replaced with a super high voltage power IGBT.

• 센서학회지
• /
• 제31권2호
• /
• pp.107-114
• /
• 2022

The effects of ring radius and coupling spacing on the free spectral range (FSR), full width at half maximum (FWHM), quality factor, and sensitivity of single-channel and add-drop channel slot ring resonators were systematically investigated using FIMMPROP and PICWAVE numerical software. The single-channel ring resonator exhibited better characteristics, namely, a wider FSR and narrower FWHM compared with the add-drop structure; thus, it was evaluated to be more suitable for biochemical sensors. The FSR, FWHM, quality factor, and sensitivity for a single channel ring resonator with a radius of 59.4 ㎛ and coupling gap of 0.5 ㎛ were 2.4 nm, 0.087 nm, 17677, and 550 [nm/RIU], respectively.

• 한국가금학회지
• /
• 제22권1호
• /
• pp.7-13
• /
• 1995

To investigate the response of egg production to the artificial light to induce early egg laying. and the changes of egg weight and egg shape during the egg laying cycle, 30 Korean ring-necked pullets and their 1,284 eggs layed under artificial light control were used in this study. The first egg was ohserved at the age of 31 wk, after 4 wk of stimulating light(16 hour light: 8 hour dark). Egg production rate during seven 2-wk periods from the begining of the first egg was 43.7% and a clear peak egg production(61.7%) was shown at the 4th 2-wk period. The effects of egg production period and pullet on the egg weight, egg length, egg width and egg shape index(width/length) were significant(P<0.01). In the egg production cycle. egg weight, egg length and egg width increased steadly with time. but the value of egg shape index increased up to the 3rd 2-wk period and then decreased. Repeatabilities from intraclass correlation for the egg weight, egg length. egg width and egg shape index were 0.61. 0.53, 0.49 and 0.48, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제36권3호
• /
• pp.55-60
• /
• 2008

본 연구는 목재의 재질에 대한 목탄 시용의 효과를 구명하기 위하여 수행되었다. 그 결과 묘목의 연륜폭은 대조구보다 목탄시용구에서 더 넓은 것으로 나타났다. 목탄시용에 있어서, 낙엽송탄이 가장 큰 연륜폭을 나타냈고 다음으로 잣나무탄, 파티클보오드탄, 상수리탄 순으로 나타났다. 만재율과 비중은 목탄시용구가 대조구보다 낮았으며 낙엽송탄에서 가장 낮았다. 가도관장은 대조구보다 분말탄 시용구에서 길게 나타났지만 입상탄에서는 유의한 차이가 없는 것으로 나타났다. 가도관폭은 목탄시용구와 무처리구 간에 유의한 차이가 없는 것으로 나타났다. 세포벽두께도 조재부의 경우 목탄시용구와 무처리구간에 유의한 차이가 없는 것으로 나타났으나, 만재부의 경우는 목탄시용구가 무처리구 보다 큰 것으로 나타냈다. 마이크로피부릴 경각은 입상탄 시용구에서 대조구보다 작은 것으로 나타났지만 분말탄 시용구와 입상탄 시용구 간에는 유의한 차이가 없는 것으로 나타났다. 모든 처리구에서 분말탄과 입상탄간에는 차이가 없는 것으로 나타났다.