• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.1
• /
• pp.43-45
• /
• 2002

We have theoretically investigated steady-state carrier transport and current self-oscillation in negative-effective-mass (NEM) p$\^$+/pp$\^$+/diodes. The current self-oscillation here is a result of the formation and traveling of electric field domains in the p base having a NEM. The dependence of self-oscillating frequency on the applied dc voltage is obtained by detailed numerical simulations. In the calculations, we have considered the scatterings by carrier-impurity, carrier-acoustic phonon, carrier-polar-phonon, and carrier-nonpolar-phonon-hole interactions . This kind of NEM oscillator allows us to reach a current oscillation with terahertz frequency, thus it may be used as a broadband source of terahertz radiation.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.134-137
• /
• 2012

Power metal-oxide semiconductor field-effect transistor (MOSFET) devices are widely used in power electronics applications, such as brushless direct current motors and power modules. For a conventional power MOSFET device such as trench double-diffused MOSFET (TDMOS), there is a tradeoff relationship between specific on-state resistance and breakdown voltage. To overcome the tradeoff relationship, a super-junction (SJ) trench MOSFET (TMOSFET) structure is studied and designed in this letter. The processing conditions are proposed, and studies on the unit cell are performed for optimal design. The structure modeling and the characteristic analyses for doping density, potential distribution, electric field, width, and depth of trench in an SJ TMOSFET are performed and simulated by using of the SILVACO TCAD 2D device simulator, Atlas. As a result, the specific on-state resistance of 1.2 $m{\Omega}-cm^2$ at the class of 100 V and 100 A is successfully optimized in the SJ TMOSFET, which has the better performance than TDMOS in design parameters.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.221-227
• /
• 2020

In this paper, the Iterated Consider Extended Kalman Filter (ICEKF) is proposed for bearing-only localization of GNSS interference to improve the estimation performance and filter consistency. The ICEKF is an extended version of Consider KF (CKF) for Iterated EKF (IEKF) to consider an effect of bearing measurement bias error to filter covariance. The ICEKF can mitigate the EKF divergence problem which can occur when linearizing the nonlinear bearing measurement by a large initial state error. Also, it can mitigate filter inconsistency problem of EKF and IEKF which can occur when a weakly observable bearing measurement bias error state is not included in filter state vector. The simulation result shows that the localization error of the ICEKF is smaller than the EKF and IEKF, and the Root Mean Square (RMS) estimation error of ICEKF matches the covariance of filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.395-398
• /
• 1996

In this study, when the nonlinear overhead crane which allows simultaneously travel and traverse motion moves a desired transport route, the object suspended the end of rope does undesirable swing motion. Nonlinear overhead crane pertubes in the vicinity of an operating point, therefore the nonlinear overhead crane is modified to linear overhead crane for the operating point. The linear overhead crane was controlled to swing angles of the object by the ratio of torque inputs to motors of the girder and the trolley. As a basis for the result of the linear overhead crane, the nonlinear overhead crane was controlled swing angles of the object and positions of the overhead crane without collision with environmental equipment by partial state feedback control.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.12
• /
• pp.1933-1939
• /
• 1990

In this paper, we proposed an algorithm which used backtracking method to get time information, and it be modelled DMS (Dynamic Multisection) by feature vectors and time information whic are represented to similiar feature in word patterns spoken during continuous time domain, for Korean Speech recognition by independent speaker using DMS. Each state of model is represented time sequence, and have time information and feature vector. Typical feature vector is determined as the feature vector of each state to minimize the distance between word patterns. DDD Area names are selected as recognition wcabulary and 12th LPC cepstrum coefficients are used as the feature parameter. State of model is made 8 multisection and is used 0.2 as weight for time information. Through the experiment result, recognition rate by DMS model is 94.8%, and it is shown that this is better than recognition rate (89.3%) by MSVQ(Multisection Vector Quantization) method.

• KSBB Journal
• /
• v.32 no.2
• /
• pp.96-102
• /
• 2017

The lignocellulose that is a major component of spent coffee ground was degraded and saccharified. To implement the spent coffee, after several pre-treatments, inoculation of Phanerochaete chrysosporium and solid-state fermentation were conducted. The optimal temperature of the enzymes (lignin peroxidase, manganese peroxidase, xylanase, laccase, and cellulase) for degradation of lignocellulose by P. chrysosporium was found. We also measured the maximum activity of enzymes (lignin peroxidase 0.15 IU/mL, manganese peroxidase 0.90 IU/mL, laccase 0.11 IU/mL, cellulase 5.87 IU/mL, carboxymethyl cellulase 9.52 IU/mL, xylanase 1.16 IU/mL) used for the process. As a result, 4.73 mg/mL of reduced sugar was obtained and 61.02% of lignin was degraded by solid state fermentation of P. chrysosporium on spent coffee ground.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.12
• /
• pp.591-596
• /
• 2002

This Paper Presents a new methodology for Direct Load Control(DLC) and Unit Commitment. To consider economical effect of DLC, we developed 3-Dimensional dynamic programming which can combine unit commitment and DLC. Traditional dynamic programming has 2-Dimensional which consist of state and stage, but newly developed dynamic programming has DLC state, U.C. state, and stage. As a result, economical DLC and unit commitment schedule of the power system is possible. This method is applied to the test system, and the usefulness of the method is verified.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.431-441
• /
• 1991

A robust H$_{\infty}$ control design methodology and its application to a Space Station attitude and momentum control problem are presented. This new approach incorporates nonlinear multi-parameter variations in the state-space formulation of H$_{\infty}$ control theory. An application of this robust H$_{\infty}$ control synthesis technique to the Space Station control problem yields a remarkable result in stability robustness with respect to the moments-of-inertia variation of about 73% in one of the structured uncertainty directions. The performance and stability of this new robust H$_{\infty}$ controller for the Space Station are compared to those of other controllers designed using a standard linear-quadratic-regulator synthesis technique.que.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.617-620
• /
• 2012

The denoising mapping with the closest-neighbor clustering (CNC) method in denoise-and-forward two-way relay channels is studied. Specifically, the symmetry of the constellations in source terminals A and B is utilized to reduce the complexity of the CNC method. The specific case considered first to illustrate how the constellation symmetry works in the CNC method is the quadrature phase-shift keying constellation in A and B and the single-antenna deployment in all terminals. This case study shows that an enormous complexity reduction can be achieved. Next, the result is extended to multiple-antenna scenarios and square quadrature amplitude modulations.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.3
• /
• pp.76-82
• /
• 1999

This study was carried out to verify finding performance of dental diamond bur and investigate the possibility of AE application in density field. Work pieces were made of acryl and bovine respectively for the experiments in this study. Grinding test was conducted to get the data of grinding resistance and specific finding energy of low different types of diamond bur by using tool dynamometer. AE signal was acquired to verify grinding process in the AE measuring system. AErms value was increased as the grinding velocity and depth were increasing, but it decreased as the feed rate was increasing. The case of the small value of AE signal is due to abnormal grinding in D type diamond bur. By analyzing AErms start and finish time of grinding working, abnormal grinding state can be confined. Abnormal state can be found through the behavior of AE signal in the finding working. As a result, it is expected that forecast of abnormal state is possible using AE equipments under real time process.