• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1098-1101
• /
• 2004

The ordinary stereo image of an object consists of data of left and right views. Therefore, the left and right image pairs have to be transmitted simultaneously in order to display 3-dimentional video at the remote site. However, due to the twice data in comparing with a monoscopic image of the same object, it needs to be compressed for fast transmission and resource saving. Hence, it needs an effective coding algorithm for compressing stereo image. It was found previously that compressing left and right frames independently will achieve the compression ratio lower than compressing by utilizing the spatial redundancy between both frames. Therefore, in this paper, we study the stereo image compression technique based on the multiresolution wavelet transform using varied disparity-block size for estimation and compensation. The size of disparity-block in the stereo pair subbands are scaling on a coarse-to-fine wavelet coefficients strategy. Finally, the reference left image and residual right image after disparity estimation and compensation are coded by using SPIHT coding. The considered method demonstrates good performance in both PSNR measures and visual quality for stereo image.

• Membrane and Water Treatment
• /
• v.8 no.1
• /
• pp.89-112
• /
• 2017

Dyeing wastewaters are the most problematic wastewater in textile industries and also, growing amounts of waste fibers in carpet industries have concerned environmental specialists. Among different treatment methods, membrane filtration processes as energy-efficient and compatible way, were utilized for several individual problems. In this research, novel hybrid membranes were prepared by waste fibers of mechanical carpets as useful resource of membrane matrix and industrial graphite powder as filler to eliminate Chrysophenine GX from dyeing wastewater. These membranes were expected to be utilized for first stage of hybrid membrane filtration process including (adsorption-ultrafiltration) and nanofiltration in Kashan Textile Company. For scaling of membrane filtration process, fouling mechanism of these membranes were recognized and explained by the use of genetic algorithm, as well. The graphite increased rejection and diminished permeate flux at low concentration but in high concentration, the performance was significantly worsened. Among all hybrid membranes, 18% wt. waste fibers-1% wt. graphite membrane had the best performance and minimum fouling. The maximum pore size of this optimum membrane was ranged from 16.10 to 18.72 nm.

• Structural Engineering and Mechanics
• /
• v.14 no.1
• /
• pp.99-118
• /
• 2002

The scaled-boundary finite element method is a novel semi-analytical technique, combining the advantages of the finite element and the boundary element methods with unique properties of its own. The method works by weakening the governing differential equations in one coordinate direction through the introduction of shape functions, then solving the weakened equations analytically in the other (radial) coordinate direction. These coordinate directions are defined by the geometry of the domain and a scaling centre. This paper presents a general development of the scaled boundary finite-element method for two-dimensional problems where two boundaries of the solution domain are similar. Unlike three-dimensional and axisymmetric problems of the same type, the use of logarithmic solutions of the weakened differential equations is found to be necessary. The accuracy and efficiency of the procedure is demonstrated through two examples. The first of these examples uses the standard finite element method to provide a comparable solution, while the second combines both solution techniques in a single analysis. One significant application of the new technique is the generation of transition super-elements requiring few degrees of freedom that can connect two regions of vastly different levels of discretisation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.56-62
• /
• 2008

Modern microprocessors must deliver high application performance, while the design process should not subordinate power. In terms of performance and power tradeoff, the instructions window is particularly important. This is because a large instruction window leads to achieve high performance. However, naive scaling conventional instruction window can severely affect the complexity and power consumption. This paper explores an architecture level approach to reduce power dissipation. We propose a low power issue logic with an efficient tag translation. The direct lookup table (DTL) issue logic eliminates the associative wake-up of conventional instruction window. The tag translation scheme deals with data dependencies and resource conflicts by using bit-vector based structure. Experimental results show that, for SPEC2000 benchmarks, the proposed design reduces power consumption by 24.45% on average over conventional approach.

• Journal of Environmental Health Sciences
• /
• v.4 no.1
• /
• pp.47-50
• /
• 1977

This report is intended to describe as brief as possible the result of study on purity of the Korean Bee Honey. Purity of bee honey was measured by scaling the enzyme activities of two different honey groups: such as, the standard group and control group each including the samples of honey originated from the resource of acarcia, chestnut or miscellaneous origin. The samples of honey were collected from different sources: to wit, honey belonging to the standard group were collected from the township of Seoboo, Yangju county, Kyunggido province, Korea, while honey belonging to the control group were collected from the street side shops, market or the companies producing the secondary food from honey. The results of this study were summarized as follow: 1. It was found that honey belonging to the standard group contained less moisture than those belonging to the control group. Republic of Korea Ministry of Health and Social Affairs Food Control Regulation stipulates that honey must contain moisture less than 20%. The samples of' both groups contained moisture more than 20%, although honey belonging to the control group were relatively more so than honey belonging to the standard group. 2. Honey belonging to the standard group were found stronger in sugar reduction activities than those belonging to the control group. It was also noted that honey of acracia origin was strongest in reduction activities of the three different origin in the same group. 3. $\alpha$-Amylase and $\beta$-amylase were discovered to have activated more strongly in honey belonging to the standard group than those belonging to the control group. The enzyme activitie, varied depending on the origin of plant where honey comes from. For instance, honey of miscellaneous origin indicated the strongest activities in $\alpha$-amylase while honey of chestnut origirt indicated strongest in $\beta$-amylase.

• Journal of Biosystems Engineering
• /
• v.26 no.6
• /
• pp.545-552
• /
• 2001

Nondestructive methods such as ultrasonic and magnetic resonance imaging systems have many advantages but still much expensive. And they do not give exact color information and may miss some details. If it is allowed to destruct a biological object to obtain interior and exterior informations, 3D image visualization model from a series of sliced sectional images gives more useful information with relatively low cost. In this paper, a PC based automatic 3D visualization system is presented. The system is composed of three modules. The first module is the handling and image acquisition module. The handling module feeds and slices a cylindrical shape paraffin, which holds a biological object inside the paraffin. And the paraffin is kept being solid by cooling while being handled. The image acquisition modulo captures the sectional image of the object merged into the paraffin consecutively. The second one is the system control and interface module, which controls actuators for feeding, slicing, and image capturing. And the last one is the image processing and visualization module, which processes a series of acquired sectional images and generates a 3D volumetric model. To verify the condition for the uniform slicing, normal directional forces of the cutting edge according to the various cutting angles were measured using a strain gauge and the amount of the sliced chips were weighed and analyzed. Once the 3D model was constructed on the computer, user could manipulate it with various transformation methods such as translation, rotation, and scaling including arbitrary sectional view.

• Journal of Intelligence and Information Systems
• /
• v.15 no.4
• /
• pp.201-212
• /
• 2009

Even though the spread spectrum method is known as most robust algorithm to general attacks, it has a drawback to the time axis attack. In this paper, I proposed a robust audio copyright protection algorithm which is robust to the time axis attack and has advantages of the spread spectrum method. Time axis attack includes the audio length variation attack with same pitch and the audio frequency variation attack. In order to detect the embedded watermark by the spread spectrum method, the detection algorithm should know the exact rate of the time axis attack. Even if there is a method to know the rate, it needs heavy computational resource and it is not possible to implement. In this paper, solving this problem, the audio signal is transformed into time-invariant domain, and the spread spectrum watermark is embedded into the audio in the domain. Therefore the proposed algorithm has the advantages of the spread spectrum method and it is also robust to the time axis attack. The time-invariant domain process is that the audio is arranged by log scale time axis, and then, the Fourier transform is taken to the audio in the log scale time axis. As a result, the algorithm can get the time-invariant watermark signal.

• Journal of Forest and Environmental Science
• /
• v.34 no.4
• /
• pp.293-303
• /
• 2018

Sumber Jaya (54,194 hectares) is a district in West Lampung, Indonesia, located at the upper part of Tulang Bawang watershed. This watershed is one major water resource for Lampung Province, but has become a focal point of discussion because of the widespread conversion of forestland to coffee plantations and human settlements which lead to environmental and hydrological problems. This research aimed to evaluate Sumber Jaya watershed affecting by rapid land use change using hydrological methods as a base for watershed management. Nested catchment structure consisted of eight sub-catchments was employed in this research to assess scaling issues of land use change impacts on rainfall-runoff connections. Six tipping bucket rain gages were installed on the hill slopes of each sub-catchment and Parshall flumes were installed at the outlets of each sub-catchment to monitor stream flow. First, unit hydrograph that expressed the relationship of rainfall and runoff was computed using IHACRES model. Second, unit hydrograph was also constructed from observations of input and response during several significant storms with approximately equal duration. The result showed that most of the storm flow from these catchments consisted of slow flow. A maximum of about 50% of the effective rainfall became quick flow, and only less than 10% of remaining effective rainfall which was routed as slow flow contributed to hydrograph peaks; the rest was stored. Also, comparing peak responses and recession rates on the hydrograph, storm flow discharge was generally increased slowly on the rising limb and decreased rapidly on the falling limb. These responses indicated the soils in these catchments were still able to hold and store rain water.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.859-876
• /
• 2010

In this paper, we propose a hierarchical application traffic classification system as an alternative means to overcome the limitations of the port number and payload based methodologies, which are traditionally considered traffic classification methods. The proposed system is a new classification model that hierarchically combines a binary classifier SVM and Support Vector Data Descriptions (SVDDs). The proposed system selects an optimal attribute subset from the bi-directional traffic flows generated by our traffic analysis system (KU-MON) that enables real-time collection and analysis of campus traffic. The system is composed of three layers: The first layer is a binary classifier SVM that performs rapid classification between P2P and non-P2P traffic. The second layer classifies P2P traffic into file-sharing, messenger and TV, based on three SVDDs. The third layer performs specialized classification of all individual application traffic types. Since the proposed system enables both coarse- and fine-grained classification, it can guarantee efficient resource management, such as a stable network environment, seamless bandwidth guarantee and appropriate QoS. Moreover, even when a new application emerges, it can be easily adapted for incremental updating and scaling. Only additional training for the new part of the application traffic is needed instead of retraining the entire system. The performance of the proposed system is validated via experiments which confirm that its recall and precision measures are satisfactory.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.3
• /
• pp.155-169
• /
• 2015

As an essential means to the exploitation of new demands, the export of agri-food has the price-supporting effect on the domestic agri-food and its expansion can be a good way to increase farms' income. Of course, to enhance farms' income under the liberalization of the market, it is necessary to have countermeasures considering various factors. To this end, the study understood the experiences of farms doing exports and looked into ways to improve them by reviewing their motivations to export, difficulties, requirements, etc. In this context, the study conducted the purposive sampling among tomato export farmhouses in Jeongseon-gun in the export enforcement phase and executed the theme analysis. The research findings and suggestions are as follows. First, in order to enhance the level of commercialization of Jeongseon-gun tomatoes and reinforce the trade bargaining power, it is necessary to form the consensus on policy and make the scaling of the site based on the strong organization power. To this end, it requires the active role of agricultural cooperatives that take a big portion of distribution in the site and distribute its profits directly to farmhouses. Second, it is necessary to set clear target markets for Jeongseon-gun tomato export farms and set sales strategies for each target market. That is, in order to expand the export of Jeongseon-gun tomatoes, after clarifying local sales and export sales, export farmhouses should focus on quality management and secure the quantity for export. Third, to expand the export to Japan which already has the foundation for the export of Korean tomatoes, and to new export countries of China, Russia, etc., it is necessary to set the 'Two-Track Strategies for Export Market (particular item for focus and particular area for focus)' through the building of network of tomato export areas in Gangwon-do. In conclusion, to expand the export of Jeongseon-gun tomatoes, agricultural cooperatives and leaders together should build the strong organizational power with farmhouses and secure the quantities for export. And, according to the 'Two-Track Strategies for Export Market (particular item for focus and particular area for focus)', export infrastructure and export operational system should be built and to do so, the solidarity of tomato export farmhouses in Gangwon area should precede.