• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.140-147
• /
• 2011

In this paper, a novel position controller based on state feedback and feed-forward is proposed. Traditional position and speed controllers are replaced by a single controller with the position and speed as state feedbacks, and the position command and load torque as feed-forwards. The feedback and feed-forward gains are obtained by analytic modeling and design. The load torque, rotor speed and position are estimated by an observer based on a Kalman filter (KF) with a low resolution mechanical position sensor. Feed-forward compensation by an estimated load torque is used to improve the dynamic performance during load torque changes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.449-451
• /
• 2000

Crosstalk is the primary cause of image distortion in active matrix liquid crystal displays (AMLCD). Crosstalk produces voltage errors that limit gray scale fidelity and consequently, degrades display resolution, contrast ratio, color fidelity, and image quality. In this study, crosstalk phenomena of some methods to compensate level shift voltages has been simulated. This will be contributed to find the way to design the excellent image quality of the TFT-LCDs.

• 한국군사과학기술학회지
• /
• 제5권3호
• /
• pp.98-104
• /
• 2002

An airborne-based Direction-Finding System is developed for the application of ELINT and ES(Electronic Support). The system takes the phase-comparison technology, and has the configuration of multi-based antenna array for the solution of ambiguity due to the increased Direction-Finding resolution. This thesis describes the design of optimized distances among antennas, the electrical characteristics, the method of compensation, the direction-finding accuracy, and et. al. under the condition of the airborne-based environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.597-599
• /
• 2006

In this paper, we propose an artificial intelligence method to compensate the nonlinearity error which occurs in the heterodyne laser interferometer. Some superior properties such as long measurement range, ultra-precise resolution and various system set-up lead the laser interferometer to be a practical displacement measurement apparatus in various industry and research area. In ultra-precise measurement such as nanometer or subnanometer scale, however, the accuracy is limited by the nonlinearity error caused by the optical parts. The feedforward neural network trained by back-propagation with a capacitive sensor as a reference signal minimizes the nonlinearity error and we demonstrate the effectiveness of our proppsed algorithm through some experimental results.

• 대한전자공학회논문지SP
• /
• 제41권4호
• /
• pp.39-44
• /
• 2004

움직임 보상을 고려한 3차원 웨이블릿 변환은 공간적, 시간적인 상관관계에 중복된 정보를 효과적으로 제거한다. 그러나 웨이블릿 방식으로 압축된 영상이라 하더라도 압축률이 높은 경우 고주파 서브밴드의 변환계수가 상당수 손실되어 압축복원 시에 링 현상과 같은 왜곡이 생긴다. 본 논문에서는 이러한 3차원 웨이블릿의 압축왜곡을 줄이기 위하여 적응적 반복 복원 기법을 사용하는 새로운 알고리듬을 제안하였다. 제안된 적응적 기법에서는 에지의 방향에 따라 서로 다른 고역통과필터를 정칙화 복원에 사용하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권8호
• /
• pp.1000-1003
• /
• 2014

There are 70 vertical and 70 horizontal correctors for Pohang Light Source. Until mid of 2000, power supplies for these correctors were based on 1990's technology, so the global orbit feedback system was not possible with poor 12 bit resolution. A new task force team was assembled to develop new power supplies with BESSY type DAC cards. After the project, two vertical correctors in each lattice were connected with new power supplies, and the global orbit feedback was available within the accuracy of 5 microns. However, this replacement was not enough to satisfy the beam stability requirement of 2 microns for PLS. We have launched another power supply design based on all digital technology. This attempt was completed within a year, and 80 units were assembled in house. Currently, the global orbit feedback system is running successfully with new digital power supplies and the compensation of chamber motion due to the thermal load by using digital displacement transducers attached on each BPMs.

• Structural Monitoring and Maintenance
• /
• 제3권2호
• /
• pp.145-155
• /
• 2016

The Pulse-Pre Pump Brillouin Optical Time Domain Analysis (PPP-BOTDA) technique is introduced to implement the multi-direction strain measurement. The monitoring principle is stated. The layout scheme of optical fibers is proposed. The temperature compensation formula and its realizing method are given. The experiments, under tensile load, combined bending and tensile load, are implemented to validate the feasibility of the proposed method. It is shown that the PPP-BOTDA technique can be used to discriminate the multi-direction strains with high spatial resolution and precision.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.367-368
• /
• 2007

Dissection of rat hippocampus using high-definition stereoscopic microscope system is demonstrated. Many surgical operation or animal anatomies are anatomized with stereoscopic microscope. With stereoscopic microscope system, the environments of operation is important factor to dissector. Lights, resolution of acquired stereo images, reflected on the liquid, colors and eye fatigue are fatal factors to dissector. We reduced reflections with two incident angle of lights at 45 degree and used a complementary color at the basement and reform the stereoscopic microsystem. Dissector has felt more comfortable after compensation and operation time is more continuous.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.568-574
• /
• 2004

On-line phase tracking of an extrinsic Fabry-Perot interferometer (EFPI) and experimental vibration control of a composite beam with a sensing-patch are investigated. We propose a sensing-patch for the compensation of the interferometric non-linearity. In this paper, a sensing-patch that comprises an EFPI and a piezo ceramic(PZT) is fabricated and the characteristics of the sensing-patch are experimentally investigated. A simple and practical logic is applied for the real-time tracking of optical phase of an interferometer. Experimental results show that the proposed sensing-patch does not have the non-linear behavior of conventional EFPI and hysteresis of piezoelectric material. Moreover, it has good strain resolution and wide dynamic sensing range. Finally, the vibration control with the developed sensing-patch has been performed using Fuzzy logic controller, and the possibility of sensing-patch as a sensoriactuator is considered.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.662-667
• /
• 1996

For compensating the error motion of hydrostatic guideways, the structure and the theoretical design method of ACC(Active Controlled Capillary) are proposed. The maximum controllable range, micro step response and dynamic characteristics of ACC are analyzed experimentally for verifing the availability. The experimental results showed that by the use of ACC, the error motion within 2.7${\mu}{\textrm}{m}$ of a hydrostatic guideway can be compensated with the resolution of 27nm, 1/100 of uncontolled error, and the frequency band of 5.5Hz. From these results, it Is confirmed that the ACC is very effect to improve the moving accuracy of high or ultra precision hydrostatic guideways.