• 대한통합의학회지
• /
• 제10권3호
• /
• pp.85-94
• /
• 2022

Purpose : This study aimed to investigate the effects of 12 weeks of resistance exercise on body composition, physical strength, blood lipids, and insulin. Methods : The study was conducted on 24 elderly women divided into two groups: 12 subjects in an exercise group and 12 subjects in a control group. Resistance exercise was performed for 50 minutes a day, three times a week, for the duration of 12 weeks, and body composition, physical strength, blood lipids, and insulin were measured before and after the subjects completed the program. For the statistical analysis, the mean and standard deviation (M±SD) of each variable were calculated using SPSS version 20, and a paired t-test and two-way repeated ANOVA were conducted to test for the differences before and after the resistance exercise. All significant levels were set to α=.05 as a result of the experiment. Results : Changes in body composition after the 12-week resistance exercise program did not show any significant difference based on the comparison between the groups, but when noting the values for body fat percentage and body in the control group before and after, a significant difference was shown in fat mass (p<.05). As for changes in physical fitness, significant differences appeared in flexibility, muscle strength, and stenotic force (p<.01) when the groups were compared. Regarding pre- and post-values within each group concerning flexibility within the exercise group, significant differences were shown in gender (p<.001), muscle strength (p<.05), (p<.01), muscle earth strength, equilibrium (p<.01), stenosis force, and cardiopulmonary earth force (p<.001). Also, comparisons between populations in changes in blood lipids the values before and after in each group, significant differences in glucose (p<.05) and insulin (p<.05) were shown in the exercise group. When comparing the values before and after in each population, a significant difference was shown in the control group (p<.05). Conclusion : When all the results were integrated, the 12-week resistance exercise program was found to enhance physical strength (flexibility, muscle strength, and coordination) and improve the blood sugar levels of elderly women. In particular, resistance exercise is believed to lower the prevalence of obesity, type 2 diabetes mellitus, and metabolic diseases by having a positive effect on insulin. Further studies are suggested to verify the effect on body composition and blood lipids by setting up a variety of exercise treatment methods (including subjects, exercise periods, exercise plans, and exercise intensity focuses).

• 대한치과교정학회지
• /
• 제33권4호
• /
• pp.259-277
• /
• 2003

본 연구는 상하악 절치부의 압하를 도모하기 위한 장치의 하나인 분절호선장치를 사용하여 절치부의 순측경사에 따른 저항중심의 위치와 변화양상, 그리고 치축경사 개선과 압하를 동시에 이루기 위해 필요한 최소 후방 견인력의 크기 및 변화양상을 알아보기 위하여 3차원 유한요소법을 이용하여 시행되었으며 다음과 같은 결론을 얻었다. 1. 치축 경사도의 변화에 따른 상악 절치부 저항중심은 1) 정상 치축경사를 가진 경우에서 측절치 브라켓 원심면 후방 6mm에 위치하였다. 2) 순측경사가 $10^{\circ}$ 증가된 경우에서 측절치 브라켓의 원심면 후방 9mm에 위치하였다. 3) 순측경사가 $20^{\circ}$ 증가된 경우에서 측절치 브라켓 원심면 후방 12mm에 위치하였다. 4) 순측경사가 $30^{\circ}$ 증가된 경우에서 측절치 브라켓 원심면 후방 16mm에 위치하였다. 2. 치축 경사도의 변화에 따른 하악 절치부 저항중심은 1) 정상 치축경사를 가진 경우에서 측절치 브라켓 원심면 후방 10mm에 위치하였다. 2) 순측경사가 $10^{\circ}$ 증가된 경우에서 측절치 브라켓 원심면 후방 13mm에 위치하였다. 3) 순측경사가 $20^{\circ}$ 증가된 경우에서 측절치 브라켓 원심면 후방 15mm에 위치하였다. 4) 순측경사가 $30^{\circ}$ 증가된 경우에서 측절치 브라켓 원심면 후방 18mm에 위치하였다. 3. 응력분포 양상은 1) 각 저항중심에서 압하력을 가한 경우에 치주인대에 균일한 압축응력을 나타내었다. 2) 후방 견인력을 동시에 적용한 경우에 순측경사가 증가할수록 응력분포 양상이 복잡해지는 양상을 보였다. 4. 상하악 절치부가 $20^{\circ}$까지 순측경사된 경우에서 Pure intrusion을 위하여 필요한 후방 견인력의 크기도 증가하였다.

• 대한인간공학회지
• /
• 제24권2호
• /
• pp.45-49
• /
• 2005

The FSA(Force Sensitive Application) system measures hand force by using force resistance sensors. Compared to conventional hand force measurement systems such as Lafayette hand dynamometer and Jamar hydraulic hand dynamometer, the FSA system can be applied to analyze use of hand forces while the hand is manipulating objects for a task, However, the measurement performance of the FSA system has not been objectively evaluated. The present study tested the FSA system in terms of stability, repeatability, accuracy, and linearity. It is shown that the FSA system has good stability (CV$\leq$0.02) and linearity($R^2$=0.82), but has low repeatability(CV=$0.11{\sim}0.19$) and accuracy(22% of underevaluation on average). This performance result indicates that measurements from the FSA system should be used for relative comparison rather than for absolute comparison.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.121-122
• /
• 2012

In this research, we studied on improvement of the attraction force of solenoid operated valve for normal operation in harsh environment like vessel. Attraction force of the solenoid valves is effected by the B-H characteristics of magnetic material and the size of coil. In order to specify impact of the affection, we performed the B-H characteristics test and attraction force. Test results show that magnetic flux densities of the materials are difference each other more than 2 times in same magnetic intensity, and attraction force of the solenoid valve is 1.7 times difference as changes of resistance and the number of coil winding of solenoid.

• 소성∙가공
• /
• 제6권6호
• /
• pp.482-488
• /
• 1997

New carbon equivalent equation for the better prediction for the better prediction of roll force in a continuous hot strip mill has been formulated by applying a neural network method. In predicting roll force of steel strip, carbon equivalent equation which normalize the effects of various alloying elements by a carbon equivalent content is very critical for the accurate prediction of roll force. To overcome the complex relationships between alloying elements and operational variables such as temperature, strain, strain rate and so forth, a neural network method which is effective for multi-variable analysis was adopted in the present work as a tool to determine a proper carbon equivalent equation. The application of newly formulated carbon equivalent equation has increased prediction accuracy of roll force significantly and the effectiveness of neural network method is well confirmed in this study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.99-105
• /
• 2009

This research presents the method to decide proper locations for destressing of CWR using a non-destructive equipments to measure the longitudinal force(installation temperature) in CWR. The effect and necessity of destressing were analyzed by estimating changes of longitudinal force. The installation temperature was measured to find changes of longitudinal force in high speed and conventional lines before and after destressing or track maintenance at the locations where destressing was planed or where change of longitudinal force was expected during track maintenance. Past destressing was carried out within qualitative decision criteria. This research proposes the quantitative criteria to decide the priority order of the destressing locations reasonably by considering the difference of air temperature and stress free temperature during the track maintenances, the grade of ballast resistance force recovering and the length of destressing, etc.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.73-78
• /
• 1990

In current practice of earthquake resistant design the equivalent lateral force procedure is widely used for its simplicity and convenience. But the equivalent lateral force procedure is derived based on the assumption that the dynamic behavior of the structure is governed primarily by the fundamental vibration mode. Therefore proper prediction of dynamic responses of the structure is unreliable using the equivalent lateral force procedure when the effect of higher vibration modes on the dynamic behavior is negligible. In this study design seismic load which can reflect the effect of higher vibration modes is proposed from the point of view of proper assessment of story shears which have the major influence on the design moment of beams and columns. To evaluate the effect of higher modes, differences between the story force based on the equivalent lateral force procedure specified in current earthquake resistance building code and the one based on modal analysis using design spectrum are examined. From these results improved design seismic load for the equivalent lateral force procedure which can reflect the effect of higher vibration modes is proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.556-563
• /
• 1998

Railway bridges have a significant effect on the stress and displacement of continuous welded rail(CWR). Longitudinal compression force at high temperature, combined breaking or acceleration forces can introduce track buckling. On the other hand, longitudinal tensile forces, associated with low temperatures, in combination with breaking forces may break rail. Therefore, it is very important to work out thorough counter measures for those problems, specially in high speed rail which high safety is required. The exact evaluation of longitudinal force of rail has the key to the solution. The main aim of the present paper is to examine whether the longitudinal force of CWR's on Kyung-Bu-HSR satisfy the criteria to be fulfilled in the design of railway bridge. The analyses are carried out by using "CWRAP" program which was developed by our research group. The ballast resistance and breaking force effects on the longitudinal force of CWR are investigated.

• 한국강구조학회 논문집
• /
• 제21권3호
• /
• pp.257-266
• /
• 2009

다이아그리드 노드의 지진 및 바람에 의한 반복하중에 대한 구조성능을 해석적으로 평가하는 것은 용접특성의 반영이 어려워서 한계가 있다. 이 연구에서는 횡하중을 받는 다이아그리드 노드의 구조거동을 알아보기 위해 다이아그리드의 노드부를 축소한 모형을 이용해 실험을 수행했다. 실험체는 총 5개이며 실험의 변수는 각 부분의 용접방법, 측면스티프너와 가새 웨브의 겹침길이이다. 한쪽 대각가새에는 인장력을, 다른쪽 대각가새에는 압축력을 가하는 반복가력 실험을 수행하였다. 실험 결과 주요 파괴 원인은 축력과, 방향이 상이한 두 힘의 합력으로 인한 부가적 모멘트에 의한 작용으로 나타났다. 인장력에 의해서 가새 부재의 플랜지가 파단하였고, 압축력에 의해서 가새 플랜지의 국부좌굴이 일어났다. 또한 겹침길이와 용접타입은 초기 강성, 항복 내력 및 에너지 흡수능력에 영향을 미치는 것으로 나타났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.608-611
• /
• 2002

We developed low resistance drum that is used in sawdust machine in this research. The existent drum have two dimensional cutting form(orthogonal cutting) when see cutting pattern of saw cutter and wood, cutting resistance is big and cutting power is cost much, and also, vibration happens extremely. To improve this shortcoming, we developed helical type low cutting resistance drum for three dimensional cutting possible, decreased vibration and cutting resistance of sawdust machine, and improve productivity and sawdust ventilation. Also, a developed drum is mounting in sawdust machine, it is sold by product.