• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.68-76
• /
• 2015

Phase-change memory (PCM) is a promising technology that is anticipated to be used in the memory hierarchy of future computer systems. However, its access time is relatively slower than DRAM and it has limited endurance cycle. Due to this reason, PCM is being considered as a high-speed storage medium (like swap device) or long-latency memory. In this paper, we adopt PCM as a virtual memory swap device and present a new page replacement policy that considers the characteristics of PCM. Specifically, we aim to reduce the write traffic to PCM by considering the dirtiness of pages when making a replacement decision. The proposed replacement policy tracks the dirtiness of a page at the granularity of a sub-page and replaces the least dirty page among pages not recently used. Experimental results with various workloads show that the proposed policy reduces the amount of data written to PCM by 22.9% on average and up to 73.7% compared to CLOCK. It also extends the lifespan of PCM by 49.0% and reduces the energy consumption of PCM by 3.0% on average.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.529-532
• /
• 2001

In this paper, rust-protection performance of concrete using ground granulated blast-furnace slag are discussed. 4 kinds of W/B in combination with 3 kinds of replacement ratio of ground granulated blast-furnace slag and 2 kinds of chloride ion contents of are selected as experimental parameters. According to the experimental results, as the replacement ratio of ground granulated blast-furnace slag is increased, the corrosion area of steel bar tends to be decreased. However, as the autoclave cycle and chloride ion contents are increased, the corrosion area of steel bar is increased. In conclusion, when the replacement ratio of ground granulated blast-furnace slag is 50%, the strength and rust-protection performance appear to be most excellent.

• Journal of Korean Society for Quality Management
• /
• v.31 no.3
• /
• pp.185-192
• /
• 2003

In this paper, the properties on the optimal replacement policies for the general failure model are developed. In the general failure model, two types of system failures may occur : one is Type I failure (minor failure) which can be removed by a minimal repair and the other, Type II failure (catastrophic failure) which can be removed only by complete repair. It is assumed that, when the unit fails, Type I failure occurs with probability 1-p and Type II failure occurs with probability p, $0\leqp\leq1$. Under the model, the system is minimally repaired for each Type I failure, and it is repaired completely at the time of the Type II failure or at its age T, whichever occurs first. We further assume that the repair times are non-negligible. It is assumed that the minimal repair times in a renewal cycle consist of a strictly increasing geometric process. Under this model, we study the properties on the optimal replacement policy minimizing the long-run average cost per unit time.

• Clinical and Experimental Pediatrics
• /
• v.62 no.2
• /
• pp.43-47
• /
• 2019

Hyperammonemia can be caused by several genetic inborn errors of metabolism including urea cycle defects, organic acidemias, fatty acid oxidation defects, and certain disorders of amino acid metabolism. High levels of ammonia are extremely neurotoxic, leading to astrocyte swelling, brain edema, coma, severe disability, and even death. Thus, emergency treatment for hyperammonemia must be initiated before a precise diagnosis is established. In neonates with hyperammonemia caused by an inborn error of metabolism, a few studies have suggested that peritoneal dialysis, intermittent hemodialysis, and continuous renal replacement therapy (RRT) are effective modalities for decreasing the plasma level of ammonia. In this review, we discuss the current literature related to the use of RRT for treating neonates with hyperammonemia caused by an inborn error of metabolism, including optimal prescriptions, prognosis, and outcomes. We also review the literature on new technologies and instrumentation for RRT in neonates.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.305-312
• /
• 1999

This study is intended to propose a systematic and practical life cycle cost(LCC) model for the development of the reliability-based seismic safety and cost-effective performance criteria for design and upgrading of long-span PC bridges. The LCC models consist of five cost functions such as initial cost, repair/replacement cost, human losses, road user cost, and indirect losses of regional economy. The proposed model Is successfully expressed in temrs of Park-Ang damage indices and life cycle damage probability obtained from SMART-DRAIN-2DX which is an existing algorithm for nonlinear time history analysis. The proposed LCC model is successfully applied to a viaduct constructed by PSM, in Seoul. Based on the observations, the proposed systematic procedure for the formulation of LCC model may be useful for the development of the reliability-based seismic safety and cost-effective performance criteria for design and upgrading of long-span PC bridges.

• Smart Structures and Systems
• /
• v.30 no.6
• /
• pp.571-582
• /
• 2022

Optimal life-cycle management is a challenging issue for deteriorating regional bridges. Due to the complexity of regional bridge structural conditions and a large number of inspection and maintenance actions, decision-makers generally choose traditional passive management strategies. They are less efficiency and cost-effectiveness. This paper suggests a deep reinforcement learning framework employing double-deep Q-networks (DDQNs) to improve the life-cycle management of deteriorating regional bridges to tackle these problems. It could produce optimal maintenance plans considering restrictions to maximize maintenance cost-effectiveness to the greatest extent possible. DDQNs method could handle the problem of the overestimation of Q-values in the Nature DQNs. This study also identifies regional bridge deterioration characteristics and the consequence of scheduled maintenance from years of inspection data. To validate the proposed method, a case study containing hundreds of bridges is used to develop optimal life-cycle management strategies. The optimization solutions recommend fewer replacement actions and prefer preventative repair actions when bridges are damaged or are expected to be damaged. By employing the optimal life-cycle regional maintenance strategies, the conditions of bridges can be controlled to a good level. Compared to the nature DQNs, DDQNs offer an optimized scheme containing fewer low-condition bridges and a more costeffective life-cycle management plan.

• The Korean Journal of Applied Statistics
• /
• v.23 no.6
• /
• pp.1147-1156
• /
• 2010

This paper proposes a replacement policy following the expiration of a non-renewing free replacement-repair Warranty(NFFRW). The non-renewing free replacement-repair warranty is defined and then the maintenance model following the expiration of the NFRRW is studied from the user's point of view. As the criteria to determine the optimality of the maintenance policy, we consider the expected cost rate per unit time from the user's perspective. All maintenance costs of the system incurred after the expiration of the warranty are paid by the user. Given the cost structures during the life cycle of the system, we determine the optimal maintenance period following the expiration of a NFRRW. Finally, the numerical examples are presented for illustrative purposes.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.6
• /
• pp.205-210
• /
• 2019

The purpose of this study is to demonstrate empirically whether replacement intervals of mobile phones sold in China online B2C are influenced by purchase points such as holidays. If there is a holiday effect, it is expected that the product replacement interval or interpurchase interval will be short compared to the usual one at holiday time. In order to verify this positively, at TMall, one of the largest B2C sites in China, we explored 5,132 replacement cycle intervals and the point of purchase at which one of the sales records of an agent dealing with all multinational mobile phones had minimum two purchase records. As a result, there was a buyer who had shorter replacement period than usual in holiday season. There was no statistically significant difference in the intervals of interchange between holidays. Based on the results, it was found that the mobile phone vendors were aware that purchasing was occurring due to the holiday.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.151-157
• /
• 2013

The purpose of this study was to examine the toothbrush bristles' wear index and wear rate used by preschool children to provide information on the establishment of criteria for toothbrush replacement cycle for preschool children. One thousand twenty-two toothbrushes were collected from September 20 to November 16, 2012 was analyzed. The findings of the study were as follows: 1. As a result of analyzing the toothbrush wear index, 48.5% of the collected toothbrushes was above 0.400, and the average wear index was $0.421{\pm}0.239$. 2. As a result of analyzing the wear rate of the toothbrushes, score 2 and 3 accounted for 70.4%, and the average wear rate stood at $1.936{\pm}0.848$. 3. As a result of analyzing the state of toothbrush management, the most common average toothbrush replacement cycle was one or two months (63.9%). Concerning the method of toothbrush replacement, the largest group (52.7%) replied they changed toothbrushes based on the abrasivity of toothbrush bristles, and 16.7 percent did that at the request of parents. Given the above-mentioned findings of the study, preschool teachers and parents should be educated to ensure the successful management of preschool children toothbrushes. In addition, it's required to set evident criteria for the right toothbrush replacement cycle for preschool children, and how to provide oral health education in an efficient way should be considered as well.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.252-254
• /
• 2017

Tire is one of the most important to drive cars. There is high possibility to occur slip phenomenon and to increase braking distance depending on tire wear. Therefore, you should be check tire wear and replace tires periodically. In the past, most people manually check the wear level and judged whether or not to replace the tire. But, since the standard is different for each person, the replacement cycle becomes unclear. Since a clear replacement cycle is established, it is expected that the accident rate of a vehicle caused by a tire will be reduced. Therefore, i propose detection method for a tire wear using a motor rotation angle.