• Smart Structures and Systems
• /
• 제31권1호
• /
• pp.79-88
• /
• 2023

As the number of deteriorated buildings increases, the importance of safety diagnosis, maintenance, and the repair of buildings also increases. Traditionally, building condition assessments are performed by one person or one company and various inspections are needed. This entails a subjective judgment by the inspector, resulting in different assessment results, poor objectivity and a lack of reliability. Therefore, this study proposed a method to bring about accurate grading results of building conditions. The limitations of visual inspection and condition assessment processes previously conducted were identified by reviewing existing studies. Building defect data was collected using the reverse-engineered three-dimensional (3D) model. The accuracy of the results was verified by comparing them with the actual evaluation results. The results show a 50% time-saving to the same area with an accuracy of approximately 90%. Consequently, defect data with high objectivity and reliability were acquired by measuring the length, area, and width. In addition, the proposed method can improve the efficiency of the building diagnosis process.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.275-276
• /
• 2023

In order to prevent disaster risks caused by building aging in advance, the prevailing opinion is that it is urgent to actively improve systems such as mandatory safety inspections, and to calculate risks and develop safety management systems due to building aging. The need for systematic risk management continues to be emphasized in the process of safety inspection and repair of old buildings, but the risk management and safety management techniques of each construction entity have not been established in practice. Accordingly, this study aims to analyze the vulnerability factors of aging buildings and provide basic data on the development of a risk rating calculation model for old buildings and the efficiency of safety management systems in the future.

• 건축역사연구
• /
• 제18권4호
• /
• pp.63-79
• /
• 2009

Since the 1970's, UNESCO and ICOMOS have adopted or emphasized on the principles of historic preservation. One of them is what to require a repair have not to be repaired beyond the limits of the features and techniques to have been born in those days of establishment. On the premise, this paper is to examine the materials and technique of lime plaster work in order for roof ridge, and for bond paste of stones and bricks in government constructions in the late of Joseon dynasty(17~19c). The result of this examination will come up with a basic conformity in the case of repairing the building established in the late of Joseon dynasty. This paper is carried out for the proper repair and restoration of architectural cultural properties. Construction reports and other documents in those days are examined for the study. Following conclusions have been reached through the study. The components of old plaster mixtures which agglutinate stones each other were quicklime, perilla oil, and paper fiber. The components of old plaster mixtures which point joint of black bricks consisted of slaked lime, perilla oil, paper fiber, and cereal starch. These components were the same as coat surface of roof ridges. In the case of times, one of the following sand, white clay, sap of boiled elm bark was added to these components for the purpose of high efficiency. These materials and techniques which applied to plaster work of those buildings had developed in the process of making royal tombs. But these materials and techniques were quite different from the present.

• 대한관절경학회지
• /
• 제6권2호
• /
• pp.126-130
• /
• 2002

목적 : 견봉하 점액낭에 가려져 부분층 파열로 여겼던 회전근개 전층 파열을 견관절 내 공기 주입 방식을 사용한 견봉하 점액낭 관절경적 관찰로 효과적인 진단의 가능 여부를 알아 보고자 하였다. 대상 및 방법 : 65예 중 견관절 관절경상 회전근 개 부분층 파열인 18예를 제 1군으로, 전층 파열로서 봉합을 시행 한 37예를 제 2군으로 나누어 견관절에 $50\~100ml$의 공기주입으로 확장을 시킴과 동시에 견봉하 관절내로 누출 되는 공기 방울을 관찰하였다. 결과 : 제 1군 중 3예에서 공기 누출을 보고 전층 파열임을 확인할 수 있었으며, 제 2군 중 2예에서는 다량의 공기 누출 부위가 발견되어 불완전한 봉합임을 확인하고 추가 봉합을 시행 할 수 있었다. 결론 : 공기 주입 방식은 회전근 개 부분층 파열과 전층 파열을 감별하고, 비후되고 유착된 점액낭에 가려져 있는 전층 파열을 발견할 수 있으며, 술 후 봉합 부위의 평가에 유용한 방법으로 사료된다.

• 한국전자통신학회논문지
• /
• 제5권6호
• /
• pp.602-612
• /
• 2010

본 논문에서는 설비관리의 효율성 및 사용자의 접근성을 위해 웹 기반 통합설비 관리 시스템 응용 환경에서 통합 모델링 언어(UML) 기반의 객체 지향 모델링을 제안한다. 이를 위해 먼저 통합설비 관리 시스템 관련 기술과 요구사항을 수집하고 수집된 요구사항을 통하여 시스템 재개발 시 개발자간의 의사소통이 원활하게 이루어질 수 있고 시스템의 위험도를 줄이기 위해 업무 흐름도 및 중요한 다양한 설계 요소(클래스, 컴포넌트, 패키지, 유스케이스 등)를 고려하여 시스템을 설계한다. 그리고 통합설비 관리 시스템의 설비 마스터 코드, 점검관리, 수리관리, 고장관리의 데이터베이스를 구축한다. 마지막으로 멀티 플랫폼 기반의 그래픽 사용자 인터페이스를 고려한 웹 기반 통합설비 관리 시스템의 세 가지 주요 모듈인 설비 점검 모듈, 수리 관리 모듈, 고장 관리 모듈을 설계하고 아울러 JSP를 이용한 웹기반 GUI를 구현한다.

• Advances in Energy Research
• /
• 제2권1호
• /
• pp.1-9
• /
• 2014

The green microalgae Chlamydomonas reinhardtti is well-known specie in the terms of $H_2$ production by photo fermentation and has been studying for a long time. Although the $H_2$ production yield is promising; there are some bottlenecks to enhance the yield and efficiency to focus on a well-designed, sustainable production and also scaling up for further studies. D1 protein of photosystem II (PSII) plays an important role in photosystem damage repair and related to $H_2$ production. Because Chlamydomonas is the model algae and the genetic basis is well-studied; metabolic engineering tools are intended to use for enhanced production. Mutations are focused on D1 protein which aims long-lasting hydrogen production by blocking the PSII repair system thus $O_2$ sensitive hydrogenases catalysis hydrogen production for a longer period of time under anaerobic and sulfur deprived conditions. Chlamydomonas CC124 as control strain and D1 mutant strains(D240, D239-40 and D240-41)are cultured photomixotrophically at $80{\mu}mol\;photons\;m^{-2}s^{-1}$, by two sides. Cells are grown in TAP medium as aerobic stage for culture growth; in logarithmic phase cells are transferred from aerobic to an anaerobic and sulfur deprived TAP- S medium and 12 mg/L initial chlorophyll content for $H_2$ production which is monitored by the water columns and later detected by Gas Chromatography. Total produced hydrogen was $82{\pm}10$, $180{\pm}20$, $196{\pm}20$, $290{\pm}30mL$ for CC124, D240, D239-40, D240-41, respectively. $H_2$ production rates for mutant strains was $1.3{\pm}0.5mL/L.h$ meanwhile CC124 showed 2-3 fold lower rate as $0.57{\pm}0.2mL/L.h$. Hydrogen production period was $5{\pm}2days$ for CC124 and mutants showed a longer production time for $9{\pm}2days$. It is seen from the results that $H_2$ productions for mutant strains have a significant effect in terms of productivity, yield and production time.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권4호
• /
• pp.138-146
• /
• 2014

최근 지어지고 있는 건축물은 구조적인 안전성과 사용성 뿐만 아니라 다양하고 미려한 외관에 대한 관심이 높아지고 있는 추세이며, 이에 따라 건물의 외장재로 석재 커튼월이 많이 사용되고 있다. 그러나 이러한 석재마감공법은 건물의 중량화를 비롯한 시공성과 보수의 문제점이 발생되고 있으며, 시공시의 소음 진동 등에 의해 민원의 원인이 되기도 한다. 따라서, 본 논문에서는 시공성, 경제성을 향상시키고 보조 고정 홀을 통해 석재 패널의 부분보수가 가능한 언더컷 앵커 방식의 석재 커튼월 시공공법을 개발하였으며, 이에 대한 시공성 및 경제성분석과 안전성을 검토하기 위한 풍압 및 지진하중에 대한 구조성능 평가를 수행하였다. 연구결과, 본 공법이 기존공법에 비해 향상된 시공성과 경제성을 갖는 것으로 나타났으며, 구조성능 평가결과 외장재로서 요구되는 성능을 충족하는 것으로 나타났다.

• 한국농촌건축학회논문집
• /
• 제13권3호
• /
• pp.21-28
• /
• 2011

This paper was able to indicate to the results the following thing that attempted a required potential development demand, through the contents and cost analysis in Rural Community Development Project. Nowadays, Rural Areas comparatively have a lot of development demands related to improvements environmental of residence life and construction of Urban-Rural Exchange Facility, on the other and, there is comparatively a few facilities demands regarding agriculture production. Demand is cold storage facilities and agricultural products direct sale facilities expansion to be able to raise value added of agricultural products as facilities related comparatively a little agriculture production, and an improvement of residence life comparatively has a lot of repair environmental uninhabited house repair, river-front and the roadside, rest shelter creation demands. However, that should be forecasted so that aging of rural, population decrease and development demand is caused by a lot of issues such as maintenances operation of many Urban-Rural Exchange Facilities and a similar program and content has a lot of them in bilateral adjacent zones. Therefore, in the future plan shall attempt efficiency operating facilities and a program through characterization and network of zone so that facilities and program can have complementary relation in the adjacent zones. And item development and an investor are necessary regarding new labor force supply for continuous value maintenance of space and returning to the farm that there were the reverse agriculture production and Amenity which are an rural village. Furthermore, developmental plan of rural village is necessary through the demand analyses that a citizen wishing for things.

• 대한의생명과학회지
• /
• 제15권1호
• /
• pp.1-8
• /
• 2009

Human genomic DNA is continuously attacked by oxygen radicals originated from cellular metabolic processes and numerous environmental carcinogens. 2-deoxyribonolactone (dL) is a major type of oxidized abasic (AP) lesion implicated in DNA strand scission, mutagenesis, and formation of covalent DNA-protein crosslink (DPC) with DNA polymerase (Pol) ${\beta}$. We show here that human DNA polymerase (Pol)${\iota}$ and mitochondrial $Pol{\gamma}$ give rise to stable DNA-protein crosslink (DPC) formation that is specifically mediated by dL lesion. $Pol{\gamma}$ mediates DPC formation at the incised dL residue by its 5'-deoxyribose-5-phosphate (dRP) lyase activity, while $Pol{\gamma}$ cross links with dL thorough its intrinsic dRP lyase and AP lyase activities. Reactivity in forming dL-mediated DPC was significantly higher with $Pol{\gamma}$ than with $Pol{\iota}$. DPC formation by $Pol{\gamma}$, however, can be reduced by an accessory factor of $Pol{\gamma}$ holoenzyme that may attenuate deleterious effects of crosslink adducts on mitochondrial DNA. Comparative kinetic analysis of DPC formation showed that the rate of DPC formation with either $Pol{\iota}$ or $Pol{\gamma}$ was lower than that with $Pol{\beta}$. These results revealed that the activity of catalytic lyase in DNA polymerases determine the efficiency of DPC formation with dL damages. Irreversible crosslink formation of such DNA polymerases by dL lesions may result in a prolonged strand scission and a suicide of DNA repair proteins, both of which could pose a threat to the genetic and structural integrity of DNA.

• Corrosion Science and Technology
• /
• 제6권5호
• /
• pp.233-238
• /
• 2007

Due to the occasional occurrence of a localizedcorrosion such as a SCC and pitting in steam generator tubing(Alloy 600), leading to a significant economical loss, an effective repair technology is needed. For a successful electrodeposition inside a tube, many processes should be developed. Among these processes, an anode to be installed inside a tube, a degreasing condition to remove any dirt and grease, an activation condition for a surface oxide elimination, a strike layer forming condition which needs to be adhered tightly between an electroforming layer and a parent tube and a condition for an electroforming layer should be established. Through a combination of these various process condition parameters, the desired material properties can be acquired. Among these process parameters, various material properties including a mechanical property and its variation along with the height of the electrodeposit inside a tube as well as its thermal stability and SCC resistance should be assessed for an application in a plant. This work deals with the material properties of the Ni electrodeposits formed inside a tube by using the anode developed in this study such as the current efficiency, hardness, tensile property, thermal stability and SCC behavior of the electrodeposit in a 40wt% NaOH solution at $315^{\circ}C$. It was found that a variation of the material properties within the entire length of the electrodeposit was quite acceptable and the Ni electrodeposit showed an excellent SCC resistance.