• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.222-222
• /
• 2011

Plastic product is increasing by the growth of its demand and most of refused plastics are incinerated or reclaimed. However, the refused plastic is not easily decomposed and has the environmental problem with its various toxic gas in case of incineration. Therefore, many countries such as USA, Japan, Germany and other developed industrial countries as well as Korea are interested in studying the recyclable resource of refused plastic. The macromolecular waste pyrolysis has the advantage of collecting of raw materials in high price and can at least get fuel gas or oil with high heat capacity. It also discharges low waste gas and low toxic gas including SOx, NOx and HCl heavy metals. However, pyrolyzed oil includes enough excess unsaturated hydrocarbons to form tar, which can cause the nozzle of engines to plug when pyrolyzed oil is used as fuel. Activated carbon was proven to have prominent adsorption capability among the other adsorbents that were mainly composed of carbon. This study examined the possibility of application in activated charcoal of its solid formation by analysing the feature of pyrolysis which is one of the chemical recycling methods and getting chemical analysis of the product and activated energy. Analyze the element of the oil produced by pyrolysis using GC-MS. The experiment of tar adsorption using fly-ash showed that fly-ash improved the optical intensity of pyrolyzed oil and decreased oxygen compounds in the pyrolyzed oil.

• Journal of Microbiology and Biotechnology
• /
• 제26권9호
• /
• pp.1557-1565
• /
• 2016

Itaconic acid (IA) is a dicarboxylic acid included in the US Department of Energy's (DOE) 2004 list of the most promising chemical platforms derived from sugars. IA is produced industrially using liquid-state fermentation (LSF) by Aspergillus terreus with glucose as the carbon source. To utilize IA production in renewable resource-based biorefinery, the present study investigated the use of lignocellulosic biomass as a carbon source for LSF. We also investigated the production of fumaric acid (FA), which is also on the DOE's list. FA is a primary metabolite, whereas IA is a secondary metabolite and requires the enzyme cis-aconitate decarboxylase for its production. Two lignocellulosic biomasses (wheat bran and corn cobs) were tested for fungal fermentation. Liquid hydrolysates obtained after acid or enzymatic treatment were used in LSF. We show that each treatment resulted in different concentrations of sugars, metals, or inhibitors. Furthermore, different acid yields (IA and FA) were obtained depending on which of the four Aspergillus strains tested were employed. The maximum FA yield was obtained when A. terreus was used for LSF of corn cob hydrolysate (1.9% total glucose); whereas an IA yield of 0.14% was obtained by LSF of corn cob hydrolysates by A. oryzae.

• Journal of Microbiology and Biotechnology
• /
• 제27권8호
• /
• pp.1379-1385
• /
• 2017

The content of taxol in the bark of yews is very low, and this is not affordable from the environmental point of view. Thus, it is a necessity to look for alternative sources of taxol production to solve its supply. Currently, a large portion of the taxol in the market comes from chemical semi-synthesis, but the semi-synthetic precursors such as baccatin III and 10-deacetyl-baccatin III are extracted from needles and twigs of yew trees. Taxol-producing fungi as a renewable resource is a very promising way to increase the scale of taxol production. Our group has obtained a taxol-producing endophytic fungus, Aspergillus niger subsp. taxi HD86-9, to examine if A. niger can produce the taxanes. Six compounds from the fermentation broth of strain HD86-9 were isolated and identified by $^1H$ NMR, $^{13}C$ NMR, and ESI-MS. The results showed that the six compounds included four taxane diterpenoids (taxol, cephalomannine, baccatin III, and 10-deacetyl-baccatin III) and two non-taxane compounds (${\beta}-sitosterol$ and flavonoid isovitexin). The study verified that the taxanes can be produced by the A. niger, which is very important to taxol production via chemical semi-synthesis. Additionally, the finding is potentially very significant to solve the taxol semi-synthetic precursors extracted from needles and twigs of yew trees, and the precursor production can be easily increased through the culture condition optimization, genetic breeding, and metabolic engineering of the A. niger.

• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.362-368
• /
• 2020

합성가스는 화학제품 및 수송연료의 원료로 이용되며, 최근 목질계 바이오매스의 가스화를 통한 합성가스 생산기술에 대한 연구가 다수 진행되었다. 케나프는 높은 생산성과 이산화탄소 흡수율을 가지는 목질계 바이오매스로 이산화탄소 저감을 위한 대체자원으로서 활용 가능성이 높다. 본 연구는 케나프 가스화 실험연구 데이터를 바탕으로 상용 수준의 케나프 가스화 공정을 개발하고, 해당 공정의 타당성 및 실현가능성을 평가하는 연구로서, 케나프 가스화 통합공정 설계, 열교환망 설계, 기술경제성 평가로 구성된다. 개발된 공정으로부터 생산되는 합성가스의 최소판매가격은 1 GJ당 9.55 달러로, 합성가스의 시장가격보다 낮은 것을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.439-449
• /
• 2014

2012년 신재생에너지공급의무화제도 시행으로 국내 목재펠릿 수요가 급증하고 있으나, 현재 우리나라의 목재펠릿 자급률은 10% 수준에 머물러, 급증하는 수요를 충족하기 어려울 것으로 예상된다. 따라서 안정적인 공급과 가격이 보장될 수 있는 새로운 바이오매스의 발굴을 통하여 목재펠릿에 대한 폭발적인 수요를 대체하는 일은 우리뿐만 아니라 세계적으로 시급한 과제라 할 수 있다. 본 연구의 분석결과 고체 팜 바이오매스 중 대표적인 EFB (empty fruit bunch)와 MF (mesocarp fiber)의 2012년도 연간 발생량(함수율 10% 기준)이 말레이시아와 인도네시아에서 각각 약 2,800만톤과 2,000만 톤으로, 두 지역에서만 연간 총 4,800만 톤이 발생되는 것으로 추정된다. 연료적 특성에 있어서도 EFB의 발열량이 목재의 90% 수준을 상회하므로 목재펠릿을 대체할 수 있는 우수한 바이오매스 에너지자원이라 할 수 있다. 다만, 높은 회분함량으로 인하여 주택이나 온실의 난방용으로는 부적합하지만 발전용이나 산업용으로는 충분히 사용가능할 것으로 판단된다.

• 상하수도학회지
• /
• 제25권6호
• /
• pp.885-892
• /
• 2011

In this study, LCA(Life Cycle Assessment) on 'Saemangum CSO Project' was carried out to evaluate environmental impact which occurred during the construction and operation periods and the potential environmental impact reduction was analyzed by comparing production and reduction level of pollution loads. LCA was conducted out according to the procedure of ISO14040 which suggested Goal and Scope Definition, Life Cycle Inventory Analysis, Life Cycle Impact Assessment and Interpretation. In the Goal and Scope Definition, the functional unit was 1 m3 of CSO, the system boundary was construction and operation phases, and the operation period was 20 years. For the data collection and inventory analysis, input energies and materials from civil, architecture, mechanical and electric fields are collected from design sheet but the landscape architecture field is excepted. LCIA(Life Cycle Impact Assessment) was performed following the procedure of Eco-Labelling Type III under 6 categories which were resource depletion, eutrophication, global warming, ozone-layer destruction, and photochemical oxide formation. In the result of LCA, 83.4% of environmental impact occurred in the construction phase and 16.6% in the operation phase. Especially 78% of environmental impact occurred in civil works. The Global warming category showed the highest contribution level in the environmental impact categories. For the analysis on potential environmental impact reduction, the reduction and increased of environmental impact which occurred on construction and operation phases were compared. In the case of considering only the operation phase, the result of the comparison showed that 78% of environmental impact is reduced. On the other hand, when considering both the construction and operation phases, 50% of environmental impact is increase. Therefore, this study showed that eco-friendly material and construction method should be used for reduction of environmental impact during life cycle, and it is strongly necessary to develop technology and skills to reduce environmental impact such as renewable energies.

• KSBB Journal
• /
• 제27권6호
• /
• pp.335-340
• /
• 2012

The microalgae, Microcystis aeruginosa are able to proliferate in a wide range of freshwater ecosystem. M. aeruginosa was cultivated in 25 L and 240 L race-way reactor containing modified medium with added urea 0.2 g/L, increased $Fe^{+2}$, and decreased $Ca^{+2}$ion compared to BG11 medium. Sugar contents of M. aeruginosa grown in BG11 medium, and modified medium were 120 mg/mL and 140 mg/mL respectively. Fermentation was conducted with the extract of M. aeruginosa at $30^{\circ}C$ for 30 h, using Saccharomyces cerevisiae (Sc), Pichia stipitis (Ps), Zymomonas mobilis (Zm), and mixed-culture of these strains (Sc + Ps + Zm). Pichia stipitis (0.7%) was found to be more suitable for producing bioalcohol from M. aeruginosa extract than other strains of Saccharomyces cerevisiae (0.45%) and Zymomonas mobilis (0.61%), while mixed-cultured of these strains showed higest productivity by 1.75%. Biomass of M. aeruginosa contains the potency to be the most renewable resource for bioalcohol fermentation.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.967-976
• /
• 1996

Straw and other fibrous by-products are inevitably produced during cereal production and have traditionally been used for many purposes including feeding animals . The potential of these by -products as a feed resource for ruminants is being increasingly appreciated (FAO , 1977). In the future, the amount of cereals fed to farm animals will have to be reduced and livestock will have to rely more on by-products such as straw. The method of animal production can be classified by the major portion of feed. One is animal forage and the other is grains. In Korea , livestock farmers normally depend more than 70% upon grains for the feed stuff. The livestock production system causes the unbalance of nutrition, and results in low productivity of animal farming. In many livestock farms in Korea the rice straw is using as a major forage and the amount of rice straw fed takes 46% of total amount of required forages. Especially the rice straw is mainly using during spring, fall and winte season. However, there are still lots of problems to solved such as harvesting cost, transportation between rice farm ad livestock farm, and quality loss during drying and storage . Therefore the mechanization of straw harvesting is urgently needed to use the renewable agricultural by-products and to overcome the shortage of animal forage. The objective of this research is to develope a straw harvester with new concept which can solve the problems of the quality loss and the labor cost during drying in a field, collecting , and storage. The developed straw harvester is self-propelled machine rebuilt by rice combine and equipped with the pick-up device, the macerater and the mat-forming device.

• 한국환경농학회지
• /
• 제36권1호
• /
• pp.36-42
• /
• 2017

BACKGROUND: Yuza seed by-product has been produced in a large amount from the agricultural farms in the southern area of Korea. It has been mostly abandoned after commercial process for the production of juice, jam and tea. The study on the reuse of the yuza seed by-product has received much attention as a bio-resource material for the production of active compound in agriculture. METHODS AND RESULTS: Insecticidal rhamnolipid-producing Pseudomonas sp. EP-3 was grown in mineral salt media with the yuza seed by-product at 2, 20, 50 and 100 g/L. The growth of EP-3 was accompanied by a increase in insecticidal activity against green peach aphid. The highest insecticidal activity was observed when EP-3 was grown in the medium containing 50 g/L of the seed sample, producing approximately 996 mg/L of rhamnolipid at 96 h. Palmitic acid, stearic acid, oleic acid and linoleic acid were determined as the major fatty acids of the seed sample. The EP-3 cultures grown on the fatty acid mixture extracted from the seed sample showed a aphid mortality similar to that of cultures grown on the seed sample. The EP-3 cultures grown on 50 g/L of the seed sample showed aphid mortality more than 90% under greenhouse conditions. CONCLUSION: This study suggested that the yuza seed by-product may be used as a renewable material for microbial production of rhamnolipid against green peach aphid.

• 한국항공우주학회지
• /
• 제39권8호
• /
• pp.758-765
• /
• 2011

최근 화석 에너지의 고갈로 신재생 에너지 중에서 풍력 에너지가 각광받고 있다. 본 연구는 국내 기상과 같이 저 풍속 지역에 적합한 500W급 수직축 풍력 터빈에 관한 연구로서 공력 설계를 통해 저풍속에서도 고효율과 저소음을 가진 형상을 제시하였으며, 복합재료를 적용하여 블레이드의 구조 설계를 수행하였다. 구조 설계 후 유한 요소 모델링을 통하여 응력, 변형, 좌굴, 공진가능성에 관한 해석을 수행 하였다. 또한 피로 수명을 예측 하였으며, 최종 제작된 풍력 터빈은 구조 실험과 성능 시험을 통하여 구조 해석 결과 및 공력 해석 결과와 비교하여 잘 일치함을 확인하였다.