• International Journal of Reliability and Applications
• /
• 제12권1호
• /
• pp.15-39
• /
• 2011

This paper deals with the reliability analysis of a complex system with three possibilities at the time of repair. The considered system consists of two subsystems A and Bin series configuration (1-out-of-2: F). Subsystem A has n units which are connected in series whereas subsystem B consists of n units in parallel configuration. The configuration of subsystem A is of 1-out-of-n: F whereas subsystem B is of k-out-of-n: D and k+1-out-of-n: F nature. System has three states: Good, degraded and failed. Supplementary variable technique has been used for mathematical formulation of the model. Laplace transform is being utilized to solve the mathematical equation. Reliability, Availability, M.T.T.F., Busy Period and Cost effectiveness of the system have been computed. The repairs from state $S_7$ to $S_0$, $S_8$ to $S_0$, $S_9$ to $S_0$ and $S_{11}$ to $S_0$ have two types namely exponential and general. Joint probability distribution of repair rate from $S_7$ to $S_0$, $S_8$ to $S_0$, $S_9$ to $S_0$ and $S_{11}$ to $S_0$ is computed by Gumbel-Hougaard family of copula. Some particular cases of the system have also been derived to see the practical importance of the model.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.7-18
• /
• 2005

Over the past twenty years, the maintenance system has been developed and its importance has been increased. For the effective maintenance of the urban transit, we have developed the maintenance system based on the concept of RCM(Reliability Centered Maintenance). RCM analysis is a systematic approach to developing a cost-effective maintenance strategy based on the various components's reliability of the system in question. It is performed according to process that includes the following steps; definition of function and functional failures of the systems, construction of RB D(Reliability Block Diagram), performance of FMEA(Failure Modes & Effects Analysis) and calculation of the reliability index. The final process of RCM is to determine appropriate failure maintenance strategies. This paper aims to define the procedure of maintenace based on the concept of RCM for urban transit. The key for a successful maintenance system is an automated scheduling to the maximum extent possible and timely executions. The developed system issues maintenance plan and repair request based on analyzed data and maintenance experience.

• 품질경영학회지
• /
• 제47권1호
• /
• pp.187-198
• /
• 2019

Purpose: In this study, a reliability prediction based reliability growth management is suggested especially for the early development phase of a system and the case study of surveillance system is given. Methods: The proposed reliability prediction based reliability growth management procedures consists of 7 Steps. In Step 1, the stages for reliability growth management are classified according to the major design changes. From Step 2 to Step 5, system reliability is predicted based on reliability structures and the predicted reliabilities of subsystems (Level 2) and modules (Level 3). At each stage, by comparing the predicted system reliability with that of the previous stage, the reliability growth of the system is checked in Step 6. In Step 7, when the predicted value of sustem reliability does not satisfy the reliability goal, some design alternatives are considered and suggested to improve the system reliability. Results: The proposed reliability prediction based reliability growth management can be an efficient alternative for managing reliability growth of a system in its early development phase. The case study shows that it is applicable to weapon system such as a surveillance system. Conclusion: In this study, the procedures for a reliability prediction based reliability growth management are proposed to satisfy the reliability goal of the system efficiently. And it is expected that the use of the proposed procedures would reduce, in the test and evaluation phase, the number of corrective actions and its cost as well.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1318-1326
• /
• 2008

This paper proposes an alternative methodology for deciding an optimum deterministic reliability level (IRR; Installed Reserve Rate) by using probabilistic reliability criterion (LOLE; Loss of Load Expectation). Additionally, case studies using the proposed method induce the characteristics of relationship between the probabilistic reliability index (LOLE) and deterministic reliability index (IRR) for 2008 and 2010 years in Korea power system. The case study presents a possibility that an optimum IRR level in Korea can be assessed using the proposed method. Korea power system has been using the LOLE criterion to determine the adequacy of installed capacity (ICAP) requirement. The criterion in Korea is that the loss of load expectation shall not exceed the available capacity more than five day in ten years (=0.5[days/year]), The probabilistic reliability evaluation and production cost simulation program which is called PRASim is used in order to evaluate the relationship and optimum IRR in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.608-609
• /
• 2008

Photovoltaics and wind energy sources are being increased recognised as cost effective generation sources in small isolated power systems(SIPS) primarily supplied by costly diesel fuel. Deterministic and probabilistic techniques are combined using a system well-being approach to provide useful reliability indices for SIPS containing renewable energy. An evaluation of the contribution from photovoltaics and wind energy sources to SIPS reliability is presented. The practicality and effectiveness of the methodology is illustrated by a case study.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권2호
• /
• pp.150-158
• /
• 2017

Purpose: The RAM objective is a very important factor that has a great effect on the improvement of the operation ration during the operation maintenance and the reduction of the life cycle cost. It is used as a design criterion during the system development, and its sufficiency should be evaluated during its test evaluation. Method: This study analyzed the cases related to RAM objective setting and suggested the improvement measures. Result: The base data for RAM objective is OMS/MP, which needs to be drawn up under the supervision of the requirement military, and a high-accuracy operating availability should be set through ALDT calculation which reflects the military logistics support environment. In addition, data collection necessary for RAM objective and RAM analysis should be made by supplementing the input data of DELIIS. Conclusion: This study suggests improvement of RAM objective considering for the weapon system.

• 한국표면공학회지
• /
• 제43권3호
• /
• pp.142-147
• /
• 2010

We evaluated characteristics of ENEPIG (Electroless Nickel Electroless Palladium Immersion Gold) surface treatment for mobile equipment that requires high reliability, in addition to investigating surface treatment processes for semiconductor boards that require high reliability such as regular PCB-package systems, board-on-chip, chip-scaled package (CSP), etc and application for semiconductor package board of SIP, BOC. As a result, it appeared that ENEPIG has superior properties compared to ENIG surface treatment in corrosion resistance, solder junction, wetting, etc. We anticipate that these results will be able to lend credibility to ENEPIG as a low-cost alternative for producing mobile devices such as the cell phones, especially when applied to mass production.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.7-11
• /
• 2011

Quantity take-off (QT) is one of the most important tasks for determining the total cost of a construction project, and it requires accuracy and reliability for the result. Accuracy and reliability in BIM-based QT are also required to assure the completeness of the result. However, there has been no basis to measure the completeness of the BIM-based QT result. As BIM is increasingly being adopted in the construction industry with a wide variety of purposes, it becomes more important to have a method to improve the completeness of BIM-based QT and criteria to measure it. This research focuses on the hypothesis that the completeness of BIM-based QT relies on the accuracy and reliability of BIM and the BIM-based QT process. As a basic research to determine the completeness of BIM-based QT, this research analyzes and derives factors that affect the completeness of BIM-based QT.

• 조명전기설비학회논문지
• /
• 제22권5호
• /
• pp.13-20
• /
• 2008

과거에는 순간전압강하(Sag)나 고조파(Harmonics)와 같은 순간전력품질 문제가 부하에 큰 영향을 미치지 않았으나, 최근 컴퓨터와 같은 마이크로 프로세서를 이용하는 민감부하의 사용 증가로 인하여 전력품질에 대한 관심이 고조되고 있다. 이에 따라 현재까지 영구정전(Sustained Interruption)에 초점을 맞추고 일부 순간정전(Momentary Interruption)을 포함하여 진행되어 온 배전계통 신뢰도 연구 분야는 새로운 전환점을 맞이하고 있다. 즉, 전력품질문제로 인하여 많은 민감기기들이 트립(Trip)되어 신뢰도 비용이 발생하기 때문에, 전력품질을 고려하지 않은 신뢰도 비용평가는 그 정확도가 떨어질 수밖에 없는 실정에 있다. 본 논문에서는 배전계통 사고 시 이 사고를 제거하기 위해 사용된 리클로져에 의해 발생하는 순간전압강하를 고려하였다. 기존의 영구정전에 의한 신뢰도 비용과 순간전압강하에 의해 트립되는 기기들의 신뢰도 비용을 포함하는 개선된 배전계통 신뢰도 비용 평가 기법을 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.359-360
• /
• 2011

This paper proposes a Web Based Online Real-time Information System for Outage Cost Assessment. This system developed in this study is just only prototype as previous stage but no commercial system. Using this system, the evaluation of reliability worth is the customer cost associated with a loss of supply may be assessed and the information will be serviced online real time on smart phone.