• 제목/요약/키워드: reliability cost evaluation

검색결과 271건 처리시간 0.03초

무기체계 획득을 위한 모델링 및 시뮬레이션(M&S) 활용에 관한 연구 (A Study on Weapon Systems Acquisition for the Use of Modeling & Simulation(M&S))

  • 이필중;이영욱
    • 융합보안논문지
    • /
    • 제11권3호
    • /
    • pp.11-17
    • /
    • 2011
  • 무기체계의 획득은 획득과정 초기단계에서 시험평가 자료의 원천으로 모델링 및 시뮬레이션의 사용이 적극적으로 권장되고 있다. 이와 같이 무기체계의 획득에 있어서 신뢰성은 가장 중요한 부분 이라할 수 있고, 이를 위해 M&S를 적용하여 시험평가의 신뢰성과 정확성을 제공할 수 있으며, 시험에 소요되는 시간과 비용의 절감, 사전 예측 및 사후 검증등이 가능한 자료를 제공할 수 있다. 따라서 본 연구에서는 M&S의 이론적인 고찰과 무기체계의 획득을 위한 M&S 활용의 중요성, 획득모델의 특징, 무기체계 획득을 위한 활용실태 등을 고찰하여 효과적인 무기체계 획득을 위한 M&S의 활용방안을 찾고자 한다.

공기압을 이용한 전기설비 침수 방지 장치 개발에 관한 연구 (The development for flooding prevention apparatus of electrical equipment using air pressure)

  • 김기현;전현재;이상익;배석명;이재용
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2008년도 춘계학술대회 논문집
    • /
    • pp.281-284
    • /
    • 2008
  • Inundation of substation and ground power equipment breaks out every summer season in low-lying downtown and low-lying shore by localized heavy rain, typhoon and tidal wave. In case inundation excluding the exchanging cost of equipment, it occurs a great economic and social loss owing to recovery time and events of electric shock occur by inundation electrical equipment(Pad-mounted Transformer and Switch). In case of installing the power equipment at flood danger territory, we are necessary to the product development, the product is that water does not come in the inside the power equipment. Product of pressure maintaining are established on the basic frame and sensor operates at the flooding occurrence and is maintained a shutting tightly structure and it is a method. The product which is produced the reliability of the product it confirmed a flooding yes or no from the condition which puts in the water tank and it verified. We estimate that loss cost which is caused by with flooding and the power failure will be diminished if it is addition to advances the reliability evaluation and a security of the flood protection product.

  • PDF

병원 외래 방문 환자의 만족도 평가 및 관련 요인에 대한 연구 - 한 3차 병원 방문 환자를 중심으로 - (Measurement of Ambulatory Patients' Satisfaction and Its Influencing Factors in a Tertiary Hospital)

  • 이상일
    • Journal of Preventive Medicine and Public Health
    • /
    • 제27권2호
    • /
    • pp.366-376
    • /
    • 1994
  • 환자 만족도의 증진은 의료 제공의 궁극적인 목적의 하나이며, 의료의 질적 수준 향상을 위해서는 환자의 만족도 평가가 매우 중요하다. 따라서 판자의 만족도를 타당도와 신뢰도가 높은 도구를 이용하여 측정하고, 환자의 만족도에 영향을 미치는 요인을 규명할 필요가 있다. 이 연구는 우리 나라 실정에 적합한 표준화된 설문서의 개발에 필요한 기초자료를 제공하기 위하여 환자의 만족도를 평가하는 설문지를 개발하고 한 3차 병원 외래를 방문한 827명의 환자를 대상으로 이의 신뢰도와 타당도를 평가하였으며, 환자의 만족도에 영향을 미치는 요인을 파악하였다. 외래 방문 환자가 질을 평가하는 차원은 인자 분석을 통하여 병원 환경 및 편의 시설에 관련된 요인, 원무관리 및 보조 서비스에 관련된 요인과 의사진료에 관련된 요인으로 분류되었으며, 이 3개의 병원내 과정에 대한 척도들은 비교적 높은 신뢰도와 타당도를 나타내고 있었다. 전반적인 진료 결과를 나타내는 3개 문항은 신뢰도가 낮아, 서로 다른 별도 차원의 개념임을 의미하고 있었다. 로지스틱 회귀분석 결과 전반적인 만족도에 영향을 미치는 요인은 최근의 건강 상태, 진료비에 대한 인식과 진료에 따른 건강상태의 변화였고, 타인에게 병원을 추천할 의향에 영향을 미치는 요인은 환자의 성, 초 재진 여부, 진료에 따른 건강상태의 호전에 대한 기대, 진료비에 대한 인식과 진료에 따른 건강상태의 변화였다. 앞으로의 환자 만족도에 대한 연구에서는 이 연구 결과를 참고로 하여 조사 대상의 확대, 포괄적인 설문 문항의 개발, 조사 방법의 보완 등이 필요할 것이다. 이 연구에 사용된 설문지의 입수를 원하시는 분은 저자에게 개인적으로 연락하여 주시면, 설문지를 보내드리겠습니다.

  • PDF

실물옵션 기반의 LCC분석을 통한 태양열난방시스템의 운영유연성 반영 방안 (Application of Real Option based Life Cycle Cost Analysis for Reflecting Operational Flexibility in Solar Heating Systems)

  • 최주영;김형빈;손명진;현창택
    • 한국건설관리학회논문집
    • /
    • 제16권4호
    • /
    • pp.70-79
    • /
    • 2015
  • 신재생에너지 시스템에 대한 관심이 집중되면서 생애주기비용 분석의 중요성 또한 대두되고 있다. 하지만 LCC분석은 변화하는 환경을 반영하기 힘들며, 특히 분석시점에서의 입력변수(할인율, 인플레이션, 에너지비 등)를 하나의 고정된 값으로 가정하거나 또는 입력변수에 대한 민감도 분석만을 수행함에 따라 변화하는 환경에서 실시간으로 사용자의 의사결정을 지원하기에는 한계가 있다. 이를 위해서는 LCC분석에서의 입력변수의 불확실성뿐만 아니라 운영 유연성을 통합적으로 고려한 새로운 경제성 분석방법론이 요구된다. 따라서 본 연구에서는 신재생에너지 중 태영열난방시스템을 대상으로 미래의 불확실성과 운영상의 유연성을 확보하고 사용자의 전략적 의사결정을 지원하기 위하여 실물옵션을 활용한 LCC분석 개선방안을 제시하였다. 신재생에너지 시스템 중 태양열난방시스템에 대한 LCC 사례분석을 통하여 확정/확률론적 LCC분석 현황과 한계점을 분석하고, 이를 기반으로 실물옵션 기반 생애주기비용 분석방법을 제안하였으며, 분석결과 기존 LCC분석 결과와 달리 유가상승을 전제하에 태양열난방시스템이 기름보일러보다 경제성이 높은 것으로 분석되었다. 최종적으로 본 연구에서 제시한 실물옵션 기반 생애주기비용은 불확실한 상황과 그에 따른 운영 유연성을 동시에 고려함으로써, 신재생에너지 시스템뿐만 아니라 다양한 대안평가에서도 합리적인 의사결정을 지원할 수 있을 것으로 기대된다.

협업 공정계획을 위한 생산흐름 분석 시뮬레이션 통합 (Production Flow Analysis Simulation Integration for Collaborative Process Planning)

  • 이주연;노상도
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.987-992
    • /
    • 2005
  • Manufacturing companies should perform process planning and its evaluation concurrently with new product developments so that they can be highly competitive in the modern market. Process planners should make decisions in the manner of concurrent and collaborative engineering in order to reduce the manufacturing preparation time and cost when developing new products. Automated generation of analysis models from the integrated database, which contains process and material information, reduces time to prepare analyses and makes the models reliable. In this research, we developed a web-based system for concurrent and collaborative system for production flow analysis, using web, database, and simulation technology. An integrated database is designed to automatically generate analysis models from process and material plans without reworking the data. This system enables process planners to evaluate their decision fast and share their opinions with others easily. With this system, it is possible to save time and cost for assembly process and material planning, and reliability of process plans can be improved

  • PDF

산업수용가의 정전비용 산출을 위한 조사 분석 연구 (Questionnaire Development and Survey & Analysis for the Calculation of the Domestic Industrial Customer Interruption Costs)

  • 박충열;남기영;허창수
    • 조명전기설비학회논문지
    • /
    • 제18권4호
    • /
    • pp.165-170
    • /
    • 2004
  • 정전에 따른 직접적이고 단기간의 정전비용을 평가하기 위해 산업용 수용가를 대상으로 설문조사 결과를 요약한 것이다. 설문지는 주로 수용가의 전기전문가를 대상으로 예상되는 예비 조치에 바탕을 두고 작성되었다. 정전의 기간과 빈도를 고려한 신뢰성에 대한 경제성 평가는 어떠한 종류의 정전에 의해 유발되는 특히 대규모 산업용 수용가의 손실과 경제적인 충격을 정확히 반영하지 못했다. 수용가 집단에 초래되는 비용의 큰 차이를 내포시키기 위해 본 정전비용을 분석함에 있어서 IEC, IEEE와 같은 국제 규격을 활용하였다.

가치평가법을 사용한 정전관련비용의 산정 (Power Interruption Cost Calculation based on Value-based Methodology)

  • 이범;김경민;최남섭
    • 한국전자통신학회논문지
    • /
    • 제16권2호
    • /
    • pp.293-300
    • /
    • 2021
  • 본 연구에서는 SCDF를 사용하여 전력공급의 가치를 산정하고, 부하점별 중요도를 다면적인 평가를 하는 방법을 제시한다. 이의 방법으로 지속정전, 순간정전, 전압 Sag/Swell에 대응할 수 있는 SCDF를 제공하고, 이 SCDF를 사용하여 정전과 관련하여 어느 부하점에 어느 정도의 비용이 발생하는지를 계산하였으며, 이들 비용을 다면평가를 통해 어느 부분이 어느정도 취약한지를 평가하고 어느 부분의 확장이 필요한 지를 수치적으로 설명할 수 있도록 하였다. 본 연구를 우리나라의 실배전계통에 적용하여 평가하고 유용성을 검증하였다.

Selection of appropriate biomatrices for studies of chronic stress in animals: a review

  • Mohammad, Ataallahi;Jalil Ghassemi, Nejad;Kyu-Hyun, Park
    • Journal of Animal Science and Technology
    • /
    • 제64권4호
    • /
    • pp.621-639
    • /
    • 2022
  • Cortisol and corticosterone, hormones traditionally considered biomarkers of stress, can be measured in fluid biomatrices (e.g., blood, saliva) from live animals to evaluate conditions at sampling time, or in solid biomatrices (e.g., hair, feather) from live or dead animals to obtain information regarding long-term changes. Using these biomarkers to evaluate physiological stress responses in domestic animals may be challenging due to the diverse characteristics of biomatrices for potential measurement. Ideally, a single measurement from the biomatrix should be sufficient for evaluating chronic stress. The availability of appropriate and cost-effective immunoassay methods for detecting the biomarkers should also be considered. This review discusses the strengths and limitations of different biomatrices with regard to ensuring the highest possible reliability for chronic stress evaluation. Overall, solid biomatrices require less frequent sampling than other biomatrices, resulting in greater time- and cost-effectiveness, greater ease of use, and fewer errors. The multiplex immunoassay can be used to analyze interactions and correlations between cortisol and other stress biomarkers in the same biomatrix. In light of the lack of information regarding appropriate biomatrices for measuring chronic stress, this review may help investigators set experimental conditions or design biological research.

의료보험수가 조정을 위한 복합지표 개발에 관한 연구 (The Development of the Composite Index as a method of rate adjustment)

  • 김한중;조우현;이해종
    • 보건행정학회지
    • /
    • 제3권1호
    • /
    • pp.84-101
    • /
    • 1993
  • The current method of rate adjustment is based on the evaluation of the financial performance of hospitals. The method has the disadvantages such as too complicated, expensive process as well as low reliability due to small sample size. This study, therefore, develops a new model for the rate adjustment with the use of the composite index. In addition to that, it examines the validity of the model by comparing the result of the new method with that of the conventional method. The idea of the new model comes from the Medicare Economic Index(MEI) on which physician fees for the Medicare patients are adjusted periodically in the United States. Medical costs are classified into three groups : labor costs, materials and other expenses. Labor costs are subdivided into physicians and other personnels. Materials are subdivided into drugs and others. Other expenses are subdivided into 5 items. Macro economic indices are selected for each cost item in order to reflect the cost inflation during the specific period. Then the composite index which integrate all items according to the ration of each item in the total costs is calculated. The result from the application of empirical data to the new model is very similar to that of the current method. Furthermore, this method is very simple and also to easy to get social concensus. This model can be replaced the current method based on the analysis of the financial performance for the adjustment of medical fees.

  • PDF

한국인 질병의 장애가중치 측정 및 신뢰도 평가 (Disability Weights for Diseases in Korea)

  • 윤석준;도영경;권영훈;김창엽;박기동;김용익;신영수;이중규
    • Journal of Preventive Medicine and Public Health
    • /
    • 제36권2호
    • /
    • pp.163-170
    • /
    • 2003
  • Objectives : This study aimed to develop an evaluation protocol of disability weights using person trade-off, and to test the reliability of the developed protocol in a Korean context. Methods : To develop the valuation protocol, the Global Burden of Disease(GBD) and the Dutch studies were replicated and modified. Sixteen indicator conditions were selected from the Korean version of disease classification, which was based on that of the GBD Study, and the person trade-off method referred to the Dutch method. Results : The disability weights were valued in a two step panel sfudy. The first step was a carefully designed group process by three panels, using person trade-off to establish the disability weights for sixteen selected indicator conditions. The second step consisted of interpolation of the remaining diseases, on a disability scale, by the individual members of three panels. The members of three panels were all medical doctors, with sufficient knowledge of the consequences of a broad variety of diseases. The internal consistency of the Korean disability weights was satisfactory. Considerable agreement existed within each panel and among the panels. Conclusions : It was feasible to use a modified evaluation protocol from those used in GBD and Dutch studies, This would provide a rational basis for an international comparative study of disability weights.