• 대한전자공학회논문지TC
• /
• 제41권12호
• /
• pp.33-40
• /
• 2004

IPv6는 Neighbor Discovery(ND) 프로토콜을 사용하여 주변 노드간의 관계를 정의한다. 주변 노드를 파악하기 위해 사용되는 ND 메시지들은 네트워크에 관한 중요한 정보들을 포함한다. 이러한 네트워크 정보가 유출될 경우 네트워크 공격에 노출되어 네트워크를 이용한 서비스가 마비될 수 있다. 현재 ND 프로토콜은 여러 가지 보안 취약점이 발견되었으며 이를 보완하기 위한 보안기능이 요구되었다. 본 논문에서는 ND 프로토콜에 보안기능을 추가한 Secure ND 프로토콜을 CGA 모듈과 SEND 모듈로 구현하였다.

• 정보학연구
• /
• 제1권1호
• /
• pp.13-26
• /
• 1998

대부분의 정보검색시스템들은 부적절한 색인어들에 의해 가끔 사용자의 의도에 맞지 않는 전혀 다른 검색 결과가 나타난다. 그것은 시스템이 색인어들을 검색하기 위해 그 의미가 아닌, 단지 용어로서만 고려하기 때문이다. 검색 정확도의 증진을 위해 색인어는 연관된 용어 사용 빈도와 역 빈도 사용으로 검색되고 동시 발생어는 원시 문서로부터 추출된다. 결과적으로 색인어는 계산된 상호 정보들을 사용함으로써 그들의 세맨틱에 의해 클러스팅된다. 이 논문은 재현율의 감소없이 클라이언트 사용자 모듈로부터 피드백에 따라 세분된 세맨틱 정보를 사용하여 부적절한 검색 결과를 거절함으로써 검색 효율을 높일 수 있도록 설계하였다.

• 상하수도학회지
• /
• 제25권1호
• /
• pp.41-49
• /
• 2011

The diffuser which is conventionally adapted to MBR, has problem that decreasing the cleaning effect of membrane module by inflexible air supply due to the occlusion of sludge from diffuser hole. To solve this problem, diffuser structure of submerged module should be improved to discharge sludge which is flow into the diffuser for prevent occlusion in the diffuser. In this study, the structure of the diffuser was reformed to open lower part for preclusion the blocking. And the outlet diameter of the diffuser was drawn through the condition for the depth of water and air rate, to prevent air-leak condition of improved diffuser. Moreover, application is evaluated by comparing test with occlusion effect of the conventional and improved diffuser. From the results, air-water boundary changes are steady with changes of water depth and it shows linear relation about air rate. By using this linear numerical formula, the height of diffuser's outlet can be decided. Also, it displays that it can prevent the occlusion effect during the comparing test. Hereafter, if this diffuser is applied to practical MBR process, the occlusion problem of diffuser will be disappeared.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.15-21
• /
• 2023

In this study, a diamond turning machine and a laser-assisted machining module were utilized for the complex combined cutting of aspheric shapes and fine patterns on the surface of high-hardness brittle material, silicon. The analysis of material's form accuracy and corrective machining was conducted based on key factors such as laser output, rotational speed, feed rate, and cutting depth to achieve form accuracy below 1 ㎛ and surface roughness below 0.1 ㎛. The cutting condition and corrective machining methods were investigated to achieve the desired form accuracy and surface roughness. The rotational speed of the spindle and the linear feed rate of the diamond turning machine were varied in five stages for the cutting condition test. Surface roughness and form accuracy were measured using both a contact surface profilometer and a non-contact surface profilometer. The experimental results revealed a tendency of improved surface roughness with increased rotational speed of the workpiece, and the best surface roughness and form accuracy were observed at a feed rate of 5 mm/min. Furthermore, based on the cutting condition experiments, corrective machining was performed. The experimental results demonstrated an improvement in form accuracy from 0.94 ㎛ to 0.31 ㎛ and a significant reduction in the average value of the surface roughness curve from 0.234 ㎛ to 0.061 ㎛. This research serves as a foundation for future studies focusing on the machinability in relation to laser output parameters.

• 대한토목학회논문집
• /
• 제32권6B호
• /
• pp.355-361
• /
• 2012

광동댐 유역은 융설에 의한 봄철 유출량 변화가 두드러지게 나타나는 유역으로서, 융설을 고려하지 않고 유출량을 산정할 경우 결과에 대한 신뢰성이 저하될 밖에 없다. 본 연구에서는 K-DRUM 모형에 융 적설 모듈을 포함하여 광동댐 유역을 대상으로 최근 4년간 봄철 유출량 모의를 수행하였다. 또한 융 적설 효과를 비교하기 위해 융 적설 모의기능이 적용되지 않은 경우와 적용한 경우의 결과를 비교하였다. 모의기간은 전년도 10월부터 해당연도 4월까지로 약 7개월간이고, 시단위 강우자료와 기상자료를 입력자료로 사용하였다. 유출량 모의 결과에 대한 모형의 성능을 평가하기 위하여 NSE, PBIAS, RSR 지수로 평가하였다. 신뢰성 평가 결과, 융 적설 모듈을 적용한 K-DRUM 모형은 봄철 융설에 의한 유출모의에 적용성이 우수한 것으로 나타났다.

• 한국콘텐츠학회논문지
• /
• 제11권5호
• /
• pp.75-83
• /
• 2011

어스팩트 지향 프로그래밍은 시스템에서 크로스커팅 개념을 추출하고 소프트웨어 모듈화를 통하여 기능의 분산과 코드의 혼란을 해결하기 위한 패러다임이다. 현존하는 어스팩트 개발 방법은 크로스커팅 대상 영역을 추출에 어려움이 있기 때문에, 어스팩트 마이닝을 적용하기가 쉽지 않다. 어스팩트 마이닝에서는 기존 프로그램의 리팩토링 요소를 크로스커팅 영역으로 변환하는 기술이 필수적이다. 본 논문에서는 리팩토링에 적합한 크로스커팅 영역 자동 추출을 위한 시스템에서 크로스커팅 개념을 추출하기 위한 어스팩트 마이닝 방법을 제안한다. 소스 모듈의 추상 구문구조 명세를 이용하여, 모듈의 구조적 중복 관계 요소를 추출한다. Apriori 알고리즘을 통하여 중복 구문트리를 생성하고, 크로스커팅 영역 대상인 중복된 소스 모듈을 자동 생성, 최적화 할 수 있다. Berkeley Yacc의 berbose.c 모듈을 제안하는 마이닝 프로세스에 적용해 본 결과, 원본 대비 9.47%의 길이와 부피의 감소하였고, CCFinder 대비 4.92%의 길이 감소, 5.11%의 부피 감소 효과를 확인하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권10호
• /
• pp.516-523
• /
• 2000

In this paper, intelligent methods using digital protective relay in power supervisory control system is developed in order to protect power systems by means of timely fault detection and diagnosis during operation for induction motor which has various load environments and capacities in power systems. The spectrum pattern of input currents was used to monitor to state of induction motors, and by clustering the spectrum pattern of input currents, the newly occurrence of spectrums pattern caused by faults were detected. For diagnosis of the fault detected, the fuzzy fault tree was derived, and the fuzzy relation equation representing the relation between an induction motor fault and each fault type, was solved. The solution of the fuzzy relation equation shows the possibility of each fault's occurring. The results obtained are summarized as follows: 1) The test result on the basis of KEMC1120 and IEC60255, show that the operation time error of the digital motor protective relay is improved within ${\pm}5%$. 2) Using clustering algorithm by unsupervisory learning, an on-line fault detection method, not affected by the characteristics of loads and rates, was implemented, and the degree of dependency by experts during fault detection was reduced. 3) With the fuzzy fault tree, fault diagnosis process became systematic and expandable to the whole system, and the diagnosis for sub-systems can be made as an object-oriented module.

• 제어로봇시스템학회논문지
• /
• 제4권1호
• /
• pp.123-133
• /
• 1998

In this paper, an algorithm of fault detection and diagnosis during operation of induction motors under the condition of various loads and rates is investigated. For this purpose, the spectrum pattern of input currents is used in monitoring the state of induction motors, and by clustering the spectrum pattern of input currents, the newly occurrence of spectrum patterns caused by faults are detected. For the diagnosis of the fault detected, a fuzzy fault tree is designed, and the fuzzy relation equation representing the relation between an induction motor fault and each fault type, is solved. The solution of the fuzzy relation equation shows the possibility of occurence of each fault. The results obtained are summarized as follows : (1) Using clustering algorithm by unsupervised learning, an on-line fault detection method unaffected by the characteristics of loads and rates is implemented, and the degree of dependency for experts during fault detection is reduced. (2) With the fuzzy fault tree, the fault diagnosis process become systematic and expandable to the whole system, and the diagnosis for sub-systems can be made as an object-oriented module.

• 한국산림과학회지
• /
• 제96권5호
• /
• pp.510-514
• /
• 2007

The main purpose of this study was to develop Mountain Search and Rescue System for enhancing search and rescue operations in the mountains. This study also focused on presenting an alternative to using a cellular phone for requesting rescue due to their unreliability in remote areas. This system is designed to help in the search and rescue of people in emergency situations in the mountains. It is composed of buzzer sensors, environmental information sensors, and a statistical analysis program. A key feature of this system is that it does not require an infrastructure of internet or CDMA networks for its operation in the mountains. The measure for the study was conducted by using a zigbee protocol analyzer, RF module and 433MHz Helical antenna to analyze the rate of data reception in relation to the distance between nodes. This system is applicable to mountains provided the distance between nodes is over 100 m and under 150 m.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.311-317
• /
• 1998

Recently irrigation reservoir has been developed to perform multipurpose function. To get a maximum effect it requires to establish optimal management system for irrigation reservoir in drought and flood season. Especially we dealt with optimal flood control system for irrigation reservoir in this study. This system consists of real-time rainfall data via online system, real-time flood forecasted by SCS method in hourly basis, storage volume by water balance equation, optimal releasing discharge from the gate, the water level in right downstream, and calculation of innundated area, depth, and time using GIS, and amount of flood damages. If we consider the relation of these sub module reasonably, we can reach the optimal flood control to minimize flood damage