• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.563-568
• /
• 2004

The high temperature proton exchange (HTPE) method was used to fabricate optical waveguides based on LiNbO$_3$, which gives rise to low propagation loss and high polarization extinction ratio. To characterize the refractive index distribution of the fabricated waveguides, the guided modes of each waveguide were observed using the prism coupling method and then the refractive index profile was calculated by the inverse WKB method with the least square fitting. Finally, we showed how the HTPE parameters such as the temperature of PE, the concentration of lithium additive, and the time of PE effect the refractive index profile.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.195-195
• /
• 2010

In recent years, Anodic aluminum oxide(AAO) has become popular and attractive materials. It can be easily fabricated and self-organized pore structures. It has been widely used as a biosensor membrane, photonic crystal for optical circuit and template for nanotube growth etc. In previous papers, the theory was developed that AAO shows anisotropic optical properties, since it has anisotropic structure with numerous cylindrical pores. It gives rise to the anisotropy of the refractive index called as birefringence. It can be used as conventional polarizing elements with high efficiency and low cost. Therefore, we would like to compare the theory and experimental results in this study. One method which can measure effective refractive index of thin film is the prism coupling technique. It can give accurate results fast and simply. Furthermore, we can also measure separately the refractive index with different polarization using polarization of the laser (TE mode and TM mode). We calculated the effective refractive index with effective medium approximations (EMAs) by pore size in the SEM image. EMAs are physical models that describe the macroscopic system as the homogeneous and typical method of all mean field theories.

• Journal of the Korean Ceramic Society
• /
• v.34 no.7
• /
• pp.693-698
• /
• 1997

The refractive index and dispersion in the (100-x)(0.6CaO.0.4Al2O3).xSiO2(x=0~30) glasses were investigated. As the amount of SiO2 increased, the refractive index decreased. The change of refractive index was attributed to the change of the molar refraction rather than the molar volume. When the amount of SiO2 was smaller than 20 mol%, the average electronic transition energy gaps(E0) and the electronic oscillator strengths(Ed) were about 10.9($\pm$0.1) nd 18($\pm$0.5)eV, respectively. However E0 and Ed of the glass (CAS30) with 30 mol% SiO2 increased to 12.63 and 19.89eV, respectively. The similar results was observed in the variation of Abbe Number. Abbe number of the glass in the range of 0~20 mol% SiO2 was about 46 and that of CAS30 increased to 60. The zero-material dispersion wavelength({{{{ lambda }}0) of pure calcium aluminate glass was 1.8 ${\mu}{\textrm}{m}$. As the amount of SiO2 increased, the zero-material dispersion wavelength shifted to a shorter wavelength. {{{{ lambda }}0 of CAS30 was 1.5 ${\mu}{\textrm}{m}$, that is currently using for the optical telecommunication system.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.663-678
• /
• 2018

Refractive index and speeds of sound for the binary mixture of isomer of butanol (1) + cyclohexane, benzene and toluene (2) were measured at 308.15 K. The measured data were used to calculate deviation in refractive index ${\Delta}n$, ultrasonic speed ${\Delta}u$, isentropic compressibility $K_s^E$, available volume $V_a$, excess intermolecular free length $L_f$ and molecular association $M_A$. All the derived properties were correlated with polynomial equation. Ultrasonic speed data were predicted using various empirical correlations like Nomoto, van Dael, impedance dependence and theoretically with Schaaff's collision factor theory (CFT). Jacobson free length theory (FLT) was used to calculate $L_f$. The measured refractive index was also correlated with various mixing rules. The deviation in refractive index Δn and ultrasonic speed ${\Delta}u$ was used to determine the intermolecular interactions.

• Journal of the Korean Vacuum Society
• /
• v.6 no.S1
• /
• pp.75-79
• /
• 1997

Optical and mechanical characteristics of $TiO-2, ZrO_2 \;and\; SiO_xN_y$ thin films prepared by ion assisted deposition (IAD) were investigated. IAD films were bombarded by Ar or nitrogen ion beam from a Kaufman ion source while they were grown in as e-beam evaporator. The result shows that the Ae IAD increases the refractive index and packing density of $TiO_2 films close to those of the bulk. For $ZrO_2$ films the Ar IAD increases the average refractive index decreases the negative inhomogeneity of refractive index and reverses to the positive inhomogeneity. The optical properties result from improved packing density and denser outer layer next to air The Ar-ion bombardment also induces the changes in microstructure of $ZrO_2$ films such as the preferred (111) orientation of cubic phase increase in compressive stress and reduction of surface roughness. Inhomogeneous refractive index SiOxNy films were also prepared by nitrogen IAD and variable refractive index of $SiO_xN_y$ film was applied to fabricate a rugate filter.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.153-154
• /
• 2009

In this study, a new accommodation-dependent crystalline lens with a constant volume and homogeneous refractive index is developed. The human lens parameters, such as curvature and thickness, are calculated at the central parts of the lens, and the asphericity is adjusted at the peripheral parts of the lens due to accommodation. We propose a accommodating schematic eye which is suitable for easy paraxial calculations because the refractive index of the lens remains uniform and constant.

• Journal of Integrative Natural Science
• /
• v.4 no.1
• /
• pp.1-6
• /
• 2011

The properties of porous silicon, such as substrate properties, porosity, thickness, refractive index, surface area, and optical properties of porous silicon were reviewed. Some properties, such as porosity, refractive index, thickness, pore diameter, multi-structures, and optical properties, are strongly dependent on the anodization process parameters. These parameters include HF concentration, current density, anodization time, and silicon wafer type and resistivity.

• Journal of the Optical Society of Korea
• /
• v.7 no.3
• /
• pp.156-159
• /
• 2003

Permanent structure of photoinduced singlemode waveguide in optical fluoride glasses was demonstrated using the self-channeled plasma filament excited by a femtosecond (110 fs) Ti:sapphire laser ($λ_p$ = 800 nm). The photoinduced refractive index modification in ZBLAN glasses reached a length of approximately 10 - 15 mm from the input surface of the optical glass with the diameters ranging from 5 to 8 ${\mu}{\textrm}{m}$ at input intensities more than l.0 ${\times}$ $10^{12}$ W/$\textrm{cm}^2$. The graded refractive index profiles were fabricated to be a symmetric form from the center of an optical fluoride glass and a maximum value of refractive index change (ㅿn) was measured to be l.3${\times}$$10^{-2}$. The beam profile of the output beam transmitted through the modified region showed that the photoinduced refractive index modification produced a permanent structure of singlemode waveguide.

• Transactions of the Society of Information Storage Systems
• /
• v.4 no.1
• /
• pp.13-18
• /
• 2008

Scratches are observed on a polymer cover-layer of near-field recording (NFR) media after a servo test with rotating disc. The scratches are formed by the collision of a solid immersion lens (SIL)-media. One of the possible ways to avoid the scratch problem is to coat a dielectric protective film on the polymer cover-layer which enhances the hardness of the surface. The surface with hard characteristics in the surface reduces the scratch problem in the cover-layer. Not only the mechanical properties but also the optical properties should be controlled. Specifically, the refractive index of the dielectric protective film should be matched with the polymer cover-layer not to lose light at the interface due to the difference of the refractive index. The refractive index of the dielectric film can be tailored by controlling process parameters during sputtering and matched with that of the polymer cover-layer.

• Laser Solutions
• /
• v.15 no.1
• /
• pp.15-19
• /
• 2012

The fabrication of internal diffraction gratings with photoinduced refractive index modification in transparent materials was demonstrated using low-density plasma formation excited by a femtosecond (130 fs) Ti: sapphire laser (${\lambda}_p$=800 nm). The refractive index modifications with diameters ranging from $1{\mu}m$ to $3{\mu}m$ were photoinduced after plasma formation occurred upon irradiation with peak intensities of more than $2.0{\times}10^{13}W/cm^2$. The graded refractive index profile was fabricated to be a symmetric around from the center of the point at which low-density plasma occurred.