• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1718-1720
• /
• 2004

This paper is focused on the improvement of reflection angle of an optical scanner by changing a shape of a torsion bar attached with an optical scanner reflector(mirror). In order to improve the light efficiency of the optical scanner by virtue of the magnetic effect, which tiny magnets are attached under both ends of the optical scanner reflector. and hence the optical scanner reflector was operated in relatively lower driving voltage. By changing the torsion bar's shape I type into S type, we've got the lower resonant frequency(32.5Hz) of an optical scanner than that of conventional one(50Hz). According to these results. The reflection angle of an optical scanner with magnets was much larger in the range of about 14.8$^{circ}$ without a magnet. By making use of a magnetic actuator instead of a conventional electrostatic actuator, the optical scanner was less influenced from outdoor dust or moisture.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.897-900
• /
• 2002

The collimation mirror will be used for thermal vacuum testing of spacecraft. The reflection mirror system to generate parallel beam inside the thermal vacuum chamber. A 600mm diameter aspheric Collimation mirror was fabricated by ultra-precision single point diamond turning (SPDT). Aluminum alloy for mirror substrates is known to be easily machining, but not polishable due to its ductility. Aspheric large collimation reflector without a conventional polishing process, the surface roughness of 10nmRa, and the from error of $\lambda/2 ~\lambda/4(\lambda$ =632.8 nm) for reference curved surface 600 mm has been required. The purpose of this research is to find the optimum machining conditions for reflector cutting of A16061-T651 and apply the SPDT technique to the manufacturing of ultra precision optical components of metal aspheric reflector.

• 한국정보통신학회논문지
• /
• 제10권8호
• /
• pp.1352-1358
• /
• 2006

이 논문은 듀얼 반사판을 이용한 광대역 보우타이 슬롯 안테나를 제작 실험 했다. 슬롯 안테나는 넓은 도체판에 약 1/2 길이의 가늘고 긴 슬롯을 뚫게 되면 반파장 다이폴과 마찬가지로 효율이 좋고 강한 전파가 복사된다[1] 이 논문에서는 보통 사각 슬롯 보다 대역폭이 넓은 보우타이 형태의 슬롯으로 제작하였다. 먼저 단일 반사판 슬롯 안테나를 제작 실험 측정하였으며 제작된 단일 반사판 슬롯 안테나에 또 하나의 반사판을 슬롯 안테나와 반사판 사이에 삽입함으로서 대역폭을 확장하였다. 제작 실험 결과 VSWR<2.0 이하인 Low Band 대역폭은 약 $22%(793MHz\sim992MHz)$ 대역폭을 가졌으며 High Band 대역폭은 약 $61%(1626MHz\sim3064MHz)$의 대역폭을 가짐을 실험을 통해 알 수 있었다.

• 한국광학회지
• /
• 제25권5호
• /
• pp.239-244
• /
• 2014

재귀반사체(Retro Reflector)는 그 특별한 기능을 살려 도로 교통안전, 특수 블라인드, 광소자 resonator 등 다양한 분야에서 활용 영역이 넓어져 가고 있다. 특히 근래에는 '재귀반사구조체'를 창문의 차양 및 채광 구조물로서 도입하여 조명을 스마트화하는 경우도 제시되고 있다. 이에 본 연구는, 태양광 조절용 구조물로서, 띠구조를 1차원적으로 단순배열한 '주름판형-재귀반사체', St-RR(Strap type-Retro Reflector) 구조를 정의하고, 입사각도에 따라 그 반사광의 특성을 분석하였다. 또한, 이 특성 결과를 용이하게 파악할 수 있도록 시각화한 특성 도표를 고안하였고, 이를 이용하여 각종 태양광 조절 구조물을 보다 정량적으로 설계할 수 있음을 보였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 춘계학술대회논문집
• /
• pp.161-176
• /
• 2002

Collision avoidance is the most important part of a small vessel. Small and mediurn sized ships are surprisingly poor targets for radar reflection and are frequently in danger of being overrun by large vessels, even under good condition of visibility. One of the best way to prevent collisions at sea is to use as large and well designed a radar reflector. Thus, RCS(Radar Cross Section) increase is key element in the design of radar reflector. Radar Reflectors are normally classified into active-type and passive-type. In this paper, the RCS increase methods for passive-type reflector through shaping are explained, and analyzed with RCS performance test by computer simulation. As results from analysis, It is shown that the effective diameter of radar reflector is over 10 λ to provide a return above the threshold RCS of 25m$^2$, lower limit of detectability using X-band radar in a moderate sea.

• 한국기계가공학회지
• /
• 제4권1호
• /
• pp.43-48
• /
• 2005

This paper is described about the technique of ultra-precision machining for an aerospace aspheric mirror. The reflection mirror system generates parallel beams inside a thermal vacuum chamber. A 200mm diameter aspheric mirror was fabricated by SPDTM. Aluminum alloy as mirror substrates is known to be easily machined, but not polishable due to its ductility. Aspheric large reflector without a polishing process, the surface roughness of 10nm Ra, and the form error of ${\lambda}/2$ (${\lambda}$=632.8nm) for reference curved surface 200mm has been required. The purpose of this research is to find the optimum machining conditions for cutting reflector using Al6061-T651 and apply the SPDTM technique to the manufacturing of ultra precision optical components of Al-alloy aspheric reflector.

• 통합자연과학논문집
• /
• 제3권1호
• /
• pp.33-37
• /
• 2010

The functionalized photonic crystals of porous silicon biosensor was prepared for the application as a label-free biosensor based on distributed Bragg reflector interferometer. Prepared distributed Bragg reflector of porous silicon biosensor displayed sharp reflection in the optical reflective spectra. The mean of construction of molecular architectures on distributed Bragg reflector of porous silicon surfaces was investigated for the step-by-step binding interaction with amines, biotin, avidin, and biotinylated protein A. The subsequent introduction of avidin, and biotinylated protein A resulted in the reflectivity shifted to longer wavelengths, indicative of a change in refractive indices induced by binding of biomolecules.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.371-375
• /
• 2013

To improve the utilization efficiency of solar energy, a new solar optical concentrating system composed of a parabolic reflector with a square cross-section, a hyperbolic reflector with a square cross-section and two converging convex lenses has been designed. The proposed method can simultaneously focus and shape sun light into a square pattern on the solar panel. In addition, the total reflection property of photonic crystal within the range of the visible sunlight spectrum has been analyzed. Finally, the relationship between solar concentrating multiples and the diameter of the primary mirror has been discussed.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권2호
• /
• pp.253-259
• /
• 2016

The typical method for performing an absolute radiometric calibration of a Synthetic Aperture Radar (SAR) System is to analyze its response, without interference, to a target with a known Radar Cross Section (RCS). To minimize interference, an error-free calibration site for a Corner Reflector (CR) is required on a wide and flat plain or on an area without disturbance sources (such as ground objects). However, in reality, due to expense and lack of availability for long periods, it is difficult to identify such a site. An alternative solution is the use of a Triangular Trihedral Corner Reflector (TTCR) site, with a surrounding protection wall consisting of berms and a hollow. It is possible in this scenario, to create the minimum criteria for an effectively error-free site involving a conventional object-tip reflection applied to all beams. Sidelobe interference by the berm is considered to be the major disturbance factor. Total interference, including an object-tip reflection and a sidelobe interference, is analyzed experimentally with SAR images. The results provide a new guideline for the minimum criteria of TTCR site design that require, at least, the removal of all ground objects within the fifth sidelobe.

• 한국전자통신학회논문지
• /
• 제9권2호
• /
• pp.255-260
• /
• 2014

최근에 열화상 카메라는 수 변전 설비의 열화 상태를 진단하는데 많이 사용하고 있다. 그러나 자장이 높은 곳에서는 열화상 카메라의 전자부가 높은 자장으로 인하여 제대로 동작하지 못하는 문제점이 발생한다. 이를 해결하기 위해 일반적으로 반사경을 사용할 수 있으나 반사경의 휨 등에 의해 반사 성능이 떨어지는 문제점이 있다. 본 논문에서는 이러한 문제점을 극복하기 위하여 아크릴 판에 알루미늄을 코팅하여 설계한 후 이를 제작하여 측정의 오차를 줄이고 측정 효율을 높이는 방법을 제시한다.