• 제목/요약/키워드: reflection plate

검색결과 188건 처리시간 0.026초

수면 위에 놓인 수평 유공판에 의한 반사율과 투과율 (Reflection and Transmission Coefficients by a Surface-Mounted Horizontal Porous Plate)

  • 조일형
    • 한국해안·해양공학회논문집
    • /
    • 제25권5호
    • /
    • pp.327-334
    • /
    • 2013
  • 수면 위에 놓인 수평 유공판과 입사파간의 상호작용 문제를 선형포텐셜 이론에 기초를 둔 고유함수전개법을 사용하여 해석하였다. 수면 위에 놓인 유공판에서의 경계조건식으로 Zhao et al.(2010)가 제안한 경계조건식을 사용하였다. 유공판이 놓인 유체영역내의 진행파 성분을 나타내는 첫 번째 고유값의 허수부가 유공판의 구멍을 통과하면서 발생하는 에너지 손실과 밀접한 관련이 있다. 유공판의 공극율과 폭 그리고 입사파의 주파수와 입사각도를 변화시키면서 반사율, 투과율, 그리고 파랑하중의 변화를 살펴보았다. 공극율 계수가 최적값 b = 5.0일 때, 유공판의 폭과 입사각도가 증가할수록 투과율은 크게 줄어드는 것을 확인하였다.

부유 플랩형 고조방파제의 파랑 반사 및 전달 - 수리실험 (Wave Reflection and Transmission from Buoyant Flap Typed Storm Surge Barriers - Hydraulic Experiments)

  • 정신택;김정대;고동휘;김동현;박우선
    • 한국해안·해양공학회논문집
    • /
    • 제20권2호
    • /
    • pp.238-245
    • /
    • 2008
  • 부유 플랩형 고조방파제의 파랑 반사 및 전달 특성을 평가하기 위하여 수리실험을 실시하였다. 수리실험에 사용된 부유 플랩형 고조방파제는 해저 지중에 설치된 기초구조와 이에 힌지로 연결된 부유 구조체로 구성된다. 36종의 규칙파와 4종의 불규칙파 조건에 대하여 파랑의 반사, 전달, 회전각 등을 분석하였다. 파랑 반사 및 전달 성능을 제고하기 위한 방안의 하나로 일정 크기의 판을 부유 구조체에 부착하는 방안에 대하여 검토하였다. 수리실험 결과, 항내측에 판을 부착하는 경우는 효과가 미미하고, 외해측에 판을 부착하면 반사파와 전달파를 동시에 저감시킬 수 있는 것으로 평가되었다.

수평형 타공판에 의한 소파성능의 실험적 연구 (Experimental Study of Wave-Absorbing Performance by Horizontal Punching Plates)

  • 정학재;조일형
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제2권1호
    • /
    • pp.40-48
    • /
    • 1999
  • 해양공학과 관련된 모형실험을 위하여 많이 사용되고 있는 조파수조(2차원수조, 장수조, 사각수조)에 소파장치는 필수적인 장치이다. 본 논문에서는 새로운 개념의 소파장치의 소파성능을 실험을 통하여 살펴보았다. 새로 고안된 소파장치는 소파성능이 우수하고 가볍기 때문에 설치가 용이하다. 또한 넓은 설치공간이 필요치 않아 수조공간 활용에 있어 효과적이며 조파기로부터 발생된 파장에 큰 영향을 받지 않기 때문에 아주 큰 장파만 피한다면 거의 완벽하게 파를 소멸시킬 수 있는 장점을 가지고 있다. 본 소파장치는 일정한 크기의 구멍이 균일하게 배열된 타공판을 입사파의 진행방향과 수평으로 수면밑에 잠기게 설치한 형태로 파가 수평형 타공판을 통과하면서 타공판의 구멍을 통하여 강한 제트 흐름이 형성되면서 파 에너지가 소멸되는 특징을 가지고 있다. 모형실험 결과 수평형 타공판의 소파성능은 타공판의 잠긴 깊이와 판의 전체면적과 뚫린 부분의 면적의 비로 표현되는 공극율에 밀접한 관련이 있으며, 각각의 값은 최대 소파성능을 발휘하는 최적의 값을 가지고 있음을 규명하였다. 수평형 타공판의 앞쪽을 뒤쪽보다 약간 기울게 설치하는 방법도 특정한 주파수 범위내에서는 수평형에 비하여 우수한 소파성능을 보이며, 이때 타공판의 경사각도도 소파장치 성능을 결정하는데 중요한 변수임을 밝혔다.

  • PDF

파워흐름해석을 위한 비보존 조인트로 연성된 평판 구조물의 파워투과반사계수 해석 (Wave Transmission Approach of Coupled Plate Structures through Non-conservative Joints for Power Flow Analysis)

  • Song, J-H;Hong, S-Y;Park, Y-H;Park, D-H;Kil, H-G
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문초록집
    • /
    • pp.353.2-353
    • /
    • 2002
  • The attenuation of waves transmitted through non-conservative joints that are shown in many practical structures, is affected by the impedance and the orientation of the joint. In this paper, the joints between plate structures are assumed to be modeled as linear spring-dashpot systems and the transmission and reflection of vibration energy in the medium to high frequency ranges are investigated. (omitted)

  • PDF

Prediction of the Fundamental Mode Lamb Wave Reflection from a Crack-Like Discontinuity Using Eigen-Mode Expansion

  • Park, Jae-Seok;Jang, Chang-Heui;Lee, Jong-Po
    • 비파괴검사학회지
    • /
    • 제30권3호
    • /
    • pp.194-199
    • /
    • 2010
  • Based on the idea of eigen-mode expansion, a method to analyze the reflection of Lamb wave from a finite vertical discontinuity of plate is theoretically derived and verified by experiment. The theoretical prediction is in good agreement with the experimental result, and this strongly suggests that eigen-mode expansion method could be used for solution of inverse scattering problem for ultrasonic testing using Lamb wave.

평판 구조물의 진동 파워흐름해석을 위한 비보존 조인트 개발 (Development of Compliant and Dissipative Joints in Coupled Thin Plates for Vibrational Energy Flow Analysis)

  • 송지훈;홍석윤
    • 한국소음진동공학회논문집
    • /
    • 제18권10호
    • /
    • pp.1082-1090
    • /
    • 2008
  • In this paper, a general solution for the vibrational energy and intensity distribution through a compliant and dissipative joint between plate structures is derived on the basis of energy flow analysis (EFA). The joints are modeled by four sets of springs and dashpots to show their compliancy and dissipation in all four degrees of freedom. First, for the EFA, the power transmission and reflection coefficients for the joint on coupled plate structures connected at arbitrary angles were derived by the wave transmission approach. In numerical applications, EFA is performed using the derived coefficients for coupled plate structures under various joint properties, excitation frequencies, coupling angles, and internal loss factors. Numerical results of the vibrational energy distribution showed that the developed compliant and dissipative joint model successfully predicted the joint characteristics of practical structures vibrating in the medium-to-high frequency ranges. Moreover, the intensity distribution of a compliant and dissipative joint is described.

듀얼 반사판을 이용한 광대역 보우타이 슬롯 안테나 (Wide Band Bow-Tie Slot Antenna with Dual Reflector)

  • 이재성;이상우
    • 한국정보통신학회논문지
    • /
    • 제10권8호
    • /
    • pp.1352-1358
    • /
    • 2006
  • 이 논문은 듀얼 반사판을 이용한 광대역 보우타이 슬롯 안테나를 제작 실험 했다. 슬롯 안테나는 넓은 도체판에 약 1/2 길이의 가늘고 긴 슬롯을 뚫게 되면 반파장 다이폴과 마찬가지로 효율이 좋고 강한 전파가 복사된다[1] 이 논문에서는 보통 사각 슬롯 보다 대역폭이 넓은 보우타이 형태의 슬롯으로 제작하였다. 먼저 단일 반사판 슬롯 안테나를 제작 실험 측정하였으며 제작된 단일 반사판 슬롯 안테나에 또 하나의 반사판을 슬롯 안테나와 반사판 사이에 삽입함으로서 대역폭을 확장하였다. 제작 실험 결과 VSWR<2.0 이하인 Low Band 대역폭은 약 $22%(793MHz\sim992MHz)$ 대역폭을 가졌으며 High Band 대역폭은 약 $61%(1626MHz\sim3064MHz)$의 대역폭을 가짐을 실험을 통해 알 수 있었다.

근접주사현미경의 관점에서 플랜지된 평행평판 도파관과 근접도체스트립과의 결합에 관한 연구 (A Study on the Coupling of a Flanged Parallel-Plate Waveguide to a Nearby Conducting Strip from the Viewpoint of Near-Field Scanning Microscopy)

  • 이종익;고지환;조영기
    • 한국정보통신학회논문지
    • /
    • 제13권11호
    • /
    • pp.2260-2266
    • /
    • 2009
  • 본 논문에서는 플랜지된 평행평판도파관으로 급전된 슬릿과 이에 평행하고 근접하는 도체 스트립과의 전자기적인 결합문제를 단순화된 근접주사현미 경의 관점에서 연구하였다. 슬릿의 등가어드미턴스, 슬릿근처 도파관 내부 및 외부의 무효전력, TEM파 전압반사계수의 크기 및 위상 등의 변화결과로부터 플랜지된 평행평판도파관의 특성을 조사하였다. 제안된 구조의 근접주사현미경으로서의 성능을 다양한 구조적인 파라미터들(도파관 높이, 슬릿의 폭, 스트립의 폭, 슬릿과 스트립 간격, 슬릿 폭과 도파관 높이의 비)이 TEM파 전압반사계수의 크기와 위상에 미치는 영향을 관찰하여 점검하였다. 슬릿으로부터 스트립의 변위에 따른 전압반사계수의 변화결과로부터 도파관의 높이가 작을 때 보다 높은 주사해상도를 얻을 수 있음과 반사계수의 크기 변화에 비해 위상변화가 훨씬 민감함을 확인하였다.

유공판을 갖는 공진수로 내장형 방파제의 반사특성 (Wave Reflections from Breakwaters Having Resonance Channels with Perforated Plates)

  • 김정석;서지혜;이용훈;이중우;박우선
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2013년도 추계학술대회
    • /
    • pp.149-150
    • /
    • 2013
  • 최근 외해의 파랑을 막기 위한 방파시설로 유공방파제가 다수 설치되고 있다. 일반적으로 유공방파제는 전면에 유공격실을 설치하여 유공에서 난류를 발생을 유도하여 반사파를 저감하고, 최대 파력도 저감하는 목적을 지닌다. 유공벽은 폭풍파에 직접 노출되어 있어 쇄파 발생시 충격적인 파압이 작용될 수 있어 설계 시 유의하여야 한다. 본 논문에서는 이러한 문제가 없는 공진수로를 이용한 새로운 개념의 유공방파제를 제안하고, 중요 설계변수 변화에 대하여 제안한 시스템의 반사특성을 수치적으로 모의하였다. 수치해석은 유공판을 통과하면서 발생하는 난류에 의한 에너지 소모효과를 고려할 수 있는 선형 포텐셜 이론에 기초한 Galerkin 유한요소 모델을 이용하여 수행하였다. 유공판의 유공율에 따른 반사율 변화를 살펴보았다.

  • PDF

Specular Reflectance Measurements of Dielectric Plates in Millimeter Frequency Range

  • Kang, Jin-Seob;Kim, Jeong-Hwan;Kang, Kwang Yong;Yoon, Dae Hwan;Park, Sung Won
    • Journal of electromagnetic engineering and science
    • /
    • 제18권2호
    • /
    • pp.78-87
    • /
    • 2018
  • This paper describes specular reflectance measurements of dielectric plates in three waveguide frequency bands: D-band (110-170 GHz), G-band (140-220 GHz), and J-band (220-325 GHz). The transmit (Tx) part of the proposed specular reflectance measurement system is stationary, while the receive (Rx) part and the material under test (MUT) holder are concentric-rotating with a 2:1 speed ratio for specular reflectance measurements. In specular reflectance measurements, the first step measures the specular reflection coefficients of an MUT and a metal plate on the MUT holder located at the center of the Tx and Rx parts, and the second step calculates the specular reflectance defined by the specular reflection power (i.e., intensity) of the MUT normalized to that of the metal plate. Multiple reflection effects between the Tx and Rx antennas and the MUT on the measured specular reflectance are minimized by averaging out the multiple specular reflectances measured with changing the separation distance between the two antennas by ${\lambda}/8$ intervals. Measurement results of the perpendicular-polarized specular reflectance of commonly used dielectric plates are verified by comparing those with the analytic results and show that the results measured over the overlapped frequency range of the D-/G-bands and at the boundary frequency of the G-/J-bands agree well with the results for the other band, respectively.