• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.54-58
• /
• 1989

The purpose of this paper is to develop a more accurate attitude algorithm with low grade gyro output. The proposed algorithm estimates attitudes by combining accelerometer and gyro output. For performance improvement of the algorithm, a method of velocity compensation is proposed for a better attitude estimation which is calculated from the accelerometer output. Velocity compensation is done by using Kalman Filter to estimate another velocity component.

• 대한수학회지
• /
• 제58권1호
• /
• pp.1-28
• /
• 2021

We study a continuous data assimilation algorithm for the three-dimensional simplified Bardina model utilizing measurements of only two components of the velocity field. Under suitable conditions on the relaxation (nudging) parameter and the spatial mesh resolution, we obtain an asymptotic in time estimate of the difference between the approximating solution and the unknown reference solution corresponding to the measurements, in an appropriate norm, which shows exponential convergence up to zero.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.66-75
• /
• 2006

A modeling method for the modal analysis of rotating beam structures having complex configurations employing multi-reference frames is presented in the present study. In most structural analysis methods, single reference frame is employed for the modal analysis. For simple structures such as single beam or single plate, the method of employing single reference frame usually provides rapidly converging accurate results. However, for general structures having complex configurations, such a method provides slowly converging, and often erroneous, results. In the present study, the effects of employing multi-reference frames on the convergence and the accuracy of the modal analysis of rotating beam structures having complex configurations are investigated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.814-819
• /
• 2004

In this paper, a modeling method for the vibration analysis of rotating structures employing multi-reference frames is presented. The geometric stiffening effect that results from centrifugal inertia force is considered. In most previous studies single reference frame has been employed for the analysis. In the present study, a modeling method employing multi-reference frames is presented, and the effects of employing multi-reference frames on the analysis accuracy are investigated through solving numerical examples.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.983-989
• /
• 2004

In this paper, a modeling method for the vibration analysis of rotating structures employing multi-reference frames is presented. The geometric stiffening effect that results from centrifugal inertia force is considered. In most previous studies single reference frame has been employed for the analysis. In the present study, a modeling method employing multi-reference frames is presented, and the effects of employing multi-reference frames on the analysis accuracy are investigated through solving numerical examples.

• 반도체디스플레이기술학회지
• /
• 제19권1호
• /
• pp.17-22
• /
• 2020

Recently, the decrease in thin film thickness has been actively studied by changing several physical elements such as the increase in revolution velocity of lower substrate equipped with AC or DC motor. In this paper, we propose a novel spin coater control system that changes AC or DC motor and common use software with limitation of velocity and position control into step motor and LABVIEW software based on GUI to control revolution velocity and position more precisely. By determining six input values of rotation velocity 1, 5, 10, 25, 50, 100 PPS, we fabricated six samples using coating target, TA(tantalum) on silicon substrate and measured their thin film thickness by SEM. Hence, this research can be applied to inferring thin film thickness of tantalum regarding any value of revolution velocity without additional experiments and for linear reference model via property analysis of thin film thickness using other thin-film materials.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2473-2475
• /
• 2001

In trajectory tracking methods, the error values of current position and velocity are compensated to follow the given reference path and velocity. The path tracking for a wheeled mobile robot is treated in this paper. It is very difficult to implement stable trajectory tracking algorithms because mobile robots have kinematically non-holonomic constraints. For solving this problem, a velocity controller is presented in this paper. This velocity controller is designed by a PID controller which could be easily employed. In this case, velocity errors caused by system uncertainties or internal and external disturbances could exist. A neural network is used for compensating the velocity errors. Input variables of this neural network compensator are defined by differences between the velocities of the posture controller and the real velocities of the mobile robot. Simulation results show the effectiveness of the proposed controller.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.55-60
• /
• 2018

Force-controlled electro-hydrostatic actuators have to exhibit high backdrivability, to quickly compensate for force control errors caused by externally disturbed rod movement. To obtain high backdrivability, the servomotor for driving the hydraulic pump, should rotate exactly to such a revolution to compensate for force control errors, compressing or decompressing cylinder chambers. In this study, we proposed a modified velocity control structure, including a robust internal-loop compensator (RIC)-based velocity controller, for the servomotor to improve backdrivability of a force-controlled EHA. Performance improvement was confirmed experimentally, wherein sinusoidal velocity disturbance was applied to the force-controlled EHA, with constant reference input. Its dynamic force control errors reduced effectively, with the proposed control scheme, compared to test results with a conventional motordriver, for motor velocity control.

• 비파괴검사학회지
• /
• 제19권5호
• /
• pp.363-368
• /
• 1999

시험체의 두께나 초음파 속도를 측정하기 위해서 초음파 펄스-에코법이 널리 사용되고 있다. 초음파 속도를 결정하기 위해서는 초음파 송수신 장치를 포함한 오실로스코우프와 같은 초음파 측정 장치를 사용하여 시험편에서의 초음파진행 시간을 측정하고, 초음파 진행 거리에 해당하는 시험편의 두께를 버어니어 캘리퍼스 또는 마이크로미터와 같은 길이측정 도구를 사용하여 측정한다. 그리고 초음파를 이용하여 시험편의 두께를 측정할 때에는 초음파 속도를 알고 있는 대비 시험편으로 기준을 설정하여야 한다. 본 연구에서는, 대비 시험편 없이 재료의 두께와 초음파 속도를 동시에 구하는 방법을 제시하였다. 재질과 두께를 달리한 여러 시험편에서 측정된 초음파 속도와 두께가 기존의 방법에 의해 측정한 값과 잘 일치하였다.

• Ecology and Resilient Infrastructure
• /
• 제8권2호
• /
• pp.88-96
• /
• 2021

표면영상유속계를 이용한 유속 측정 시 하천의 넓은 영역을 경사지게 촬영하기 때문에 필연적으로 영상 왜곡이 발생하게 된다. 이와 같이 경사영상을 정사영상으로 변환하는 방법으로 수표면과 동일한 평면상의 참조점 좌표를 이용하는 2차원 투영 좌표 변환법을 사용할 경우 홍수 시 수위가 변할 경우 대응이 어렵다는 한계가 있다. 이에 본 연구에서는 수위가 변하더라도 참조점을 재설정할 필요가 없는 경사영상 왜곡 보정 방법을 개발하였다. 본 연구에서 개발한 기법은 높은 위치에 설정한 참조점의 좌표와 카메라의 좌표, 그리고 카메라의 수표면 사이의 연직거리 간의 기하학적인 관계를 이용해 수위 변화에도 대응할 수 있는 경사영상 보정 기법이다. 본 연구에서 개발한 영상 왜곡 보정 방법의 검증을 위해 실규모 하천 실험을 수행하였으며, 참조점 변환식에 대한 검증과 표면유속 측정 결과에 대한 검증을 수행하였다. 검증 결과 개발 기술의 경사영상 보정 정확도는 97% 이상을 나타냈고, 유속 검증 결과 개발 기술을 적용하여 산정한 유속을 비교한 결과 약 4% 이내의 차이를 보이는 것으로 나타나 높은 정확도 확보가 가능한 것으로 나타났다. 따라서 개발 기술을 영상 기반의 고정형 자동유량계측 시스템에 적용한다면 수위가 급변하는 홍수 시 유량측정의 정확도를 개선할 수 있을 것으로 기대한다.