• 제목/요약/키워드: reference measurements

검색결과 859건 처리시간 0.027초

저자기 모멘트용 표준시료 제작 및 성능평가 (Manufacture and Evaluation of Reference Samples for Low Magnetic Moment)

  • 박일우;홍영식;김영미;윤혜온;이경재;조성학
    • 한국자기학회지
    • /
    • 제18권1호
    • /
    • pp.1-8
    • /
    • 2008
  • 최근 발전하는 초박막 자기 시료의 정확한 자기 모멘트 측정을 위하여 저자기 모멘트 표준 시료를 제작하였다. 정밀한 저자기 모멘트 표준시료를 제작하기 위해서 자력계를 미리 자기잡음으로부터 차폐시켰고, 시료준비과정에서 강자성 불순물을 고려한 시료의 순도, 절단 방법, 시료의 모양과 두께 등을 고려하였다. 본 연구에서는 SQUID 자력계를 이용한 자기 모멘트 측정에 적합하게 $4mm{\times}6mm$ 면적을 갖는 Al, Ti과 W로 된 판상형 시료 3 개를 준비하였다. Pd 금속의 경우는 이미 잘 보정된 실린더형 시료를 사용하였다. 준비된 세 개의 판상형 시료의 경우 50,000 Oe 이내의 자기장영역에서 자기이력현상이 관측되지 않았고 모두 양호한 선형성을 보였다. 290K에서 310K까지의 온도영역에서 Ti, Al, W의 자기모멘트 값의 변화는 각각 0.7%, 1.5%, 0.1% 이내로 작았다. 본 연구에서 준비된 각각의 시편에 대해 자기모멘트 값을 결정하였으며, round robin test를 통하여 측정값의 신뢰도를 확인하였다. 그 결과 본 연구에서 제작한 표준시료는 저자기 모멘트 측정에 편리하고 적합하게 활용될 수 있음을 알 수 있었다.

PPP 기반 항법 알고리즘을 이용한 파고 계측시스템 설계 및 구현 (Development of Wave Monitoring System using Precise Point Positioning)

  • 송세필;조득재;박슬기
    • 한국정보통신학회논문지
    • /
    • 제19권5호
    • /
    • pp.1055-1062
    • /
    • 2015
  • 본 논문에서는 GPS 위치 정보를 이용한 파고계측시스템을 제안한다. 제안한 시스템은 이중주파수 측정치 및 GPS 정밀위성정보를 이용하여 위치를 추정하는 PPP 기반 항법 알고리즘을 사용한다. 이를 이용하여 기준국으로부터 보정정보를 받는 RTK나 DGPS 기반 파고계와 달리 기준국과의 거리에 관계없이 높은 정확도로 위치 추정이 가능하다. 그리고 GPS 단독으로 운용되는 간단한 시스템이므로, 가속도계 기반 파고 계측 시스템처럼 다른 센서를 이용하여 누적되는 위치 오차를 보정할 필요가 없다. 제안한 파고계측시스템을 테스트하기 위하여 경북 울진 죽변항 인근 해역에 제안한 시스템과 기상청에서 활용하는 상용 파고계를 탑재한 부표를 설치하고, 시험 운용하였다. 그리고 부표로부터 전송된 두 가지 파고 데이터를 상호 비교함으로써 제안한 시스템의 성능을 평가하였다.

Comparison of the three-dimensional structures of mandibular condyles between adults with and without facial asymmetry: A retrospective study

  • Oh, Min-Hee;Kang, Sung-Ja;Cho, Jin-Hyoung
    • 대한치과교정학회지
    • /
    • 제48권2호
    • /
    • pp.73-80
    • /
    • 2018
  • Objective: This retrospective study compared the three-dimensional (3D) structure of mandibular condyles between adults with and without facial asymmetry, and whether it influences menton deviation. Methods: Sixty adult patients were classified into symmetry and asymmetry groups based on the menton deviation on postero-anterior radiographs. The right/left differences of 3D measurements were compared between the two groups, and measurements were compared separately on the right and left sides. The correlations between menton deviation and the right/left differences were analyzed. Results: The mediolateral dimension, neck length, condylar angles to the anteroposterior reference (PO) and midsagittal reference planes, and neck and head volumes showed significantly larger right/left differences in the asymmetry group compared to the symmetry group. Separate comparisons of the right and left sides between the two groups showed that the neck was significantly shorter and neck and head volumes were significantly smaller on the left side, which was deviated side in the asymmetry group. Pearson's correlation analysis showed significant positive correlations of menton deviation with right/left differences in neck length, condylar angle to the PO plane, and neck and head volumes in the asymmetry group. Conclusions: In individuals with facial asymmetry, menton deviation is associated with the right/left differences caused by a smaller condyle on the deviated side, particularly in neck length and neck and head volumes.

Damage assessment of shear connectors with vibration measurements and power spectral density transmissibility

  • Li, Jun;Hao, Hong;Xia, Yong;Zhu, Hong-Ping
    • Structural Engineering and Mechanics
    • /
    • 제54권2호
    • /
    • pp.257-289
    • /
    • 2015
  • Shear connectors are generally used to link the slab and girders together in slab-on-girder bridge structures. Damage of shear connectors in such structures will result in shear slippage between the slab and girders, which significantly reduces the load-carrying capacity of the bridge. Because shear connectors are buried inside the structure, routine visual inspection is not able to detect conditions of shear connectors. A few methods have been proposed in the literature to detect the condition of shear connectors based on vibration measurements. This paper proposes a different dynamic condition assessment approach to identify the damage of shear connectors in slab-on-girder bridge structures based on power spectral density transmissibility (PSDT). PSDT formulates the relationship between the auto-spectral densities of two responses in the frequency domain. It can be used to identify shear connector conditions with or without reference data of the undamaged structure (or the baseline). Measured impact force and acceleration responses from hammer tests are analyzed to obtain the frequency response functions at sensor locations by experimental modal analysis. PSDT from the slab response to the girder response is derived with the obtained frequency response functions. PSDT vectors in the undamaged and damaged states can be compared to identify the damage of shear connectors. When the baseline is not available, as in most practical cases, PSDT vectors from the measured response at a reference sensor to those of the slab and girder in the damaged state can be used to detect the damage of shear connectors. Numerical and experimental studies on a concrete slab supported by two steel girders are conducted to investigate the accuracy and efficiency of the proposed approach. Identification results demonstrate that damages of shear connectors are identified accurately and efficiently with and without the baseline. The proposed method is also used to evaluate the conditions of shear connectors in a real composite bridge with in-field testing data.

농용 무인 헬리콥터의 자세추정을 위한 관성센서의 성능 평가 (Evaluation of Inertial Measurement Sensors for Attitude Estimation of Agricultural Unmanned Helicopter)

  • 배영환;오민석;구영모
    • Current Research on Agriculture and Life Sciences
    • /
    • 제32권2호
    • /
    • pp.79-84
    • /
    • 2014
  • 본 논문에서는 저가, 저전력 및 소형의 IMU를 구성하기 위한 MEMS 관성 센서를 이용하여 자세 정보를 제공받는 ARHES에 위의 센서를 사용하기 위해 자이로 센서 및 가속도센서의 데이터 출력 특성을 검증하여 오차 및 정확도를 분석하였다. 센서 실험을 위하여 진자 실험 장치를 제작하였고, 진자 운동에 대한 센서 데이터를 수집하였다. 이론적인 수식을 유추하여 센서 데이터의 정확성 분석을 위한 기준 값으로 설정하였다. 센서값과 이론값을 비교하면 각속도에서 4.32~5.72%, 가속도에서 x-, z-축 방향에 대하여 각각 3.53~6.74% 및 3.91~4.16%의 오차율을 나타냈다. 진자실험 장치를 이용한 센서 검증에서 무인헬리콥터에 사용될 센서로서 적합한 것으로 평가되었으며 이는 짐벌장치 등을 이용한 자세추정 알고리즘을 구성하는데 기초가 되었다. 또한, 더욱 정밀한 실험을 위해서는 온도 등 주변 환경 요인에 대한 보정이 요구된다.

진단용 X선을 이용한 방사선검사에서 차폐체 모양과 부가필터 변화에 따른 난소의 선량 분석 (A Dose Analysis on the Ovary According to the Type of Shielding Material and the Change of Additional Filter in Radiography Using Diagnostic X-ray)

  • 최준호
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제42권6호
    • /
    • pp.429-434
    • /
    • 2019
  • The gonads are directly affected by radiation exposure during radiography of the pelvis, abdomen, and spine. Exposure of the gonads to radiation can cause genetic mutations and can result in the occurrence of malignant tumors. In this study, we created three types of shielding material shapes for shielding of the ovaries, which are the gonads of female during radiography of the pelvis, and comparative evaluations using shadow shielding methods. The source surface distance(SSD) was 100 cm and the field size was 42 cm × 43 cm. The three types of shielding material shapes(type 1, 2 and 3) were assessed and the entrance surface dose in the ovaries were measured. The thickness of the shielding material was expanded from 0.3 mm to 2.4 mm and after five repetitions, radiation values were measured and mean values were calculated. The mean dose were 3.09 mGy for type 1, 3.54 mGy for type 2, and 3.19 mGy for type 3, indicating that the measurements were the lowest for type 1. When an additional filter of 0.2 Cu + 1 Al was used, the dose were 3.72 mGy for type 1, 5.43 mGy for type 2, and 4.05 mGy for type 3, indicating that the measurements were the lowest for type 1. The results show that, even if the shielding material is not thick, in other words, even with a thickness of 2.94 mGy for the SN 3(0.9 mm) of type 1, shielding can be achieved, with a patient dose lower than the diagnostic reference level(3.42 mGy). Additionally, among the three types of shielding material, the type 1 appeared to be the most appropriate shielding material. It is thought that the use of shielding material could reduce the risk factors for stochastic effects or critical effects of ionizing radiation during pelvic or lumbar radiography.

한국인 설과 악간극의 크기에 관한 방사선학적 연구 (A LATERAL CEPHALOMETRIC STUDY OF THE SIZE OF TONGUE AND INTERMAXILLARY SPACE IN KOREAN)

  • 이상래
    • 치과방사선
    • /
    • 제7권1호
    • /
    • pp.31-38
    • /
    • 1977
  • A study was performed to investigate the size of tongue area and intermaxillary space area, and compare the sexual differences between normal Korean children and adults by introducing planimetric and linear analysis of the lateral cephalograms. The cephalograms were composed of 41 child male aged 10.8, 40 child female aged 10.5, 38 adult male aged 21.3 and 40 adult female aged 20.8 respectively. In order to study and measure the intermaxillary space area, the followings were selected, as reference items: occlusal plane, anterior intermaxillary space height, posterior intermaxillary space height, length of intermaxillary space. Among those reference items anterior intermaxillary space height and posterior intermaxillary space height were perpendicular to the maxillary plane. An. index, (equation omitted) While the tongue area was plotted by outline of tongue shadow, above a line extending from the vallecula to the most anterior point on the hyoid body, and above a line from the most anterior point of the hyoid body to the menton. The obtained results were as follows: 1. In general the measurements of male were larger than those of female in intermaxillary space area in childhood and adulthood group. but intermaxillary space area of childhood group showed no significant sexual difference, and that of adulthood group showed significant sexual difference when evaluated statistically. 2. In both groups the measurements of male were larger than those of female in tongue area and there are also statistical significance of sexual differences in both age groups. 3. Considerable growh changes between the childhood and adulthood groups were revealed in intermaxillary space area and tongue area, and the tongue had tendency to become relatively smaller when compared with the intermaxillary space in both sex.

  • PDF

A modified device for intraoral radiography to assess the distal osseous defects of mandibular second molar after impacted third molar surgery

  • Ana, Faria-Inocencio;Mercedes, Gallas-Torreira
    • Imaging Science in Dentistry
    • /
    • 제41권3호
    • /
    • pp.115-121
    • /
    • 2011
  • Purpose : This article is to describe a modified device for intraoral radiography which was developed to obtain reproducible radiographic images for assessment of distal osseous defects of the mandibular second molar (2 Mm) after impacted third molar (3 Mm) surgery. Materials and Methods : A commercial available alignment system for posterior region was modified by adding a reference gauge pin (millimetric) and threading a hollow acrylic cylinder at the ring of the radiographic positioner to attach the X-ray collimator. The design included customized resin acrylic stent for the occlusal surface of the 2Mm in maximum intercuspal position, individualizing the biteblock positioner. Periapical radiographs were taken before and after surgical extraction of 3 Mm, employing the radiographic technique of parallelism described by Kugelberg (1986) with this modified film holder and inserting the gauge pin on the deepest bone probing depth point. Results : This technique permitted to obtain standardized periapical radiographs with a moderate to high resolution, repeatability, and accuracy. There was no difference between the measurements on the pre- and post-operative radiographs. This technique allowed better maintenance of the same geometric position compared with conventional one. The insertion of the gauge pin provided the same reference point and localized the deepest osseous defect on the two-dimensional radiographs. Conclusion : This technique allowed better reproducibility in posterior radiographic records (distal surface of 2 Mm) and more accurate measurements of radiographic bone level by the use of a millimetric pin.

Assessment of the dimensions of the pterygoid hamulus for establishing age- and sex-specific reference standards using cone-beam computed tomography

  • Mehra, Archana;Karjodkar, Freny R.;Sansare, Kaustubh;Kapoor, Ruchika;Tambawala, Shahnaz;Saxena, Vasu Siddhartha
    • Imaging Science in Dentistry
    • /
    • 제51권1호
    • /
    • pp.49-54
    • /
    • 2021
  • Purpose: This study was conducted to establish age- and sex-specific reference standards for pterygoid hamulus(PH) dimensions using cone-beam computed tomography (CBCT). Materials and Methods: CBCT scans of 1,000 patients(493 males and 507 females) were retrospectively assessed in coronal sections for length and width measurements of the PH by 3 investigators. The study data were divided into 3 age groups(group 1: <20 years, group 2: 20-50 years, group 3: >50 years). Length and width were compared using one-way analysis of variance and the t-test for age and sex, respectively. Results: The length of the PH on the right side significantly increased from group 1 (6.11±1.47mm), through group 2 (6.65±1.67 mm) to group 3 (6.99±1.79 mm) and on the left side from group 2 (6.58±1.63) to group 3 (6.98±1.70). The width of the PH significantly decreased from group 1 (1.81±0.39 mm) to group 2 (1.61±0.39 mm) on the right side, and similarly from 1.87±0.36mm to 1.67±0.37mm on the left side. PH length (7.18±1.81mm on the right side and 7.10±1.72 mm on the left side) and width (1.68±0.38 mm on the right side and 1.74±0.36 mm on the left side) were significantly greater in males than in females. Conclusion: The length of the PH increased with age, whereas width first decreased and then increased. Length and width measurements were significantly higher in males than in females. These findings will aid in the diagnosis of untraceable pain in the oropharyngeal region related to altered PH morphology.

편광 격자 기반 정량적 위상 이미징을 위한 미분 간섭 현미경 모듈 개발 (Differential Interference Contrast Microscopic Module Using a Polarization Grating for Quantitative Phase Imaging)

  • 조진희;주기남
    • 한국광학회지
    • /
    • 제34권6호
    • /
    • pp.261-268
    • /
    • 2023
  • 본 연구에서는 간단한 구조의 층밀림 간섭계 기반의 정량적 위상 이미징을 위한 미분 간섭 현미경 모듈을 제안한다. 제안하는 모듈은 복굴절성과 편광 광 분할기의 특성을 갖는 기하 위상 소자 중의 하나인 편광 격자를 이용하여 층밀림 간섭계 구조로 구성되고, 편광 카메라를 통해 획득된 4개의 편광 영상으로 정량적인 위상차 영상뿐만 아니라 일반적인 명시야 현미경 영상을 동시에 추출할 수 있다. 또한, 제안하는 모듈의 실시간 영상 획득 가능성, 안정성 및 소형화로 인해 기존의 현미경에 편리하게 적용할 수 있다. 제안하는 시스템을 검증하기 위해 다양한 시편에 대한 명시야 영상 및 위상차 영상을 획득하였고, 또한 이들 영상들을 합성하여 보다 가독성이 높은 시편 영상을 획득하였다.