• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.148-155
• /
• 2017

In this study, by using the international standards ISO TS 16774, Part 2 Test method for chemical resistance as a quality control method of injection type repair material used for leakage crack of underground concrete structure, the performance requirement against of chemical environment of underground concrete structures for repair materials was tested. For this testing 3 types for each of the 2 classes of repair materials(synthetic rubber, cement), with a total of 9 types repair materials, were selected and examined. As a result, the test results showed that the smallest performance deterioration by the change in the mass was with the synthetic rubber(RG) type as opposed to the cement type system, showing that the synthetic rubber type had the strongest relative resistance to chemical exposure. Furthermore, it is necessary to investigate the material with high resistance to chemical substances and to examine the material which can increase resistance to sodium hydroxide and sodium chloride in cement system. These results can be used as a basic index for the selection of repair materials with the strongest resistance to chemical environment found in concrete structures. In addition, it is expected that the test results derived in this study can be used as reference data that can be reflected in the quality improvement of the maintenance material to be developed later.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.61-68
• /
• 2020

In this study, the international standard ISO TS 16774 Part 3 Test Method for Water (wash out) Resistance and KS F 4935 ｢Sealant Injection type for water leakage maintenance of adhesive flexible rubber asphalt series｣, which are standardized as a quality control method of injection type repair materials used for water leakage cracks in underground concrete structures, are currently used in Korea. As a result, considering the performance criteria of "mass change rate -0.1%" stipulated in KS F 4935, the remaining 13 types repair materials, excluding RG-2 of synthetic rubber and UG-1 of urethane, need to be reviewed for stabilization of the loss resistance due to the flow of ground water. The results of this study are determined to be available as a basic indicator for the selection of repair materials used for cracks in concrete structures. In addition, it is expected that the results of this study can be utilized as reference data that can be reflected in the improvement of the quality of repair materials that will be researched and developed later.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.201-209
• /
• 2022

In order for the military to review the introduction of virtual reality technology into various education and training systems and fully utilize it, it is important to reflect the characteristics of the technology and education system and to accurately identify and selectively apply the characteristics of commercialization. In this study, the evaluation criteria were selected through the Analitic Hierarchy Process (AHP) method for factors to be considered when commercializing a virtual reality-based education and training system, and the priorities of the projects were determined. Based on previous studies, an initial AHP model was constructed and the relative importance of six factors, including reality, was analyzed as the level 1 evaluation criteria. Next, for Level 2, each evaluation criterion was evaluated to confirm the importance of each of the 11 tasks in the six evaluation criteria, and priorities were selected for each task. As a result of the analysis, level 1 showed that reality and ripple had higher importance than other factors. As a result of evaluating the final relative importance, the priority was shown in the order of ① flight training, ② disaster training, ③ shooting Training, and ④ driving a vehicle. Based on the relative priorities determined in Levels 1 and 2 of the model presented in this study, the importance of each project necessary for final decision-making of the research priorities for the defense virtual reality project was presented. It is expected that this study can be used as a reference material for prioritizing the commercialization of education and training systems in the defense sector.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.887-897
• /
• 2023

Leading waste disposal countries, such as Sweden, Switzerland, and the United Kingdom, conduct safety assessments across all stages of High-Level Radioactive Waste Deep Geological Disposal Facilities-from planning and site selection to construction, operation, closure, and post-closure management. As safety assessments are repeatedly performed at each stage, generating vast amounts of diverse data over extended periods, it is essential to construct a database for safety assessment and establish a data management system. In this study, the safety assessment data management systems of leading countries, were analyzed, categorizing them into 1) input and reference data for safety assessments, 2) guidelines for data management, 3) organizational structures for data management, and 4) computer systems for data management. While each country exhibited differences in specific aspects, commonalities included the classification of safety assessment input data based on disposal system components, the establishment of organizations to supply, use, and manage this data, and the implementation of quality management systems guided by instructions and manuals. These cases highlight the importance of data management systems and document management systems for securing the safety and enhancing the reliability of High-Level Radioactive Waste Disposal Facilities. To achieve this, the classification of input data that can be flexibly and effectively utilized, ensuring the consistency and traceability of input data, and establishing a quality management system for input data and document management are necessary.

• Korean Journal of Radiology
• /
• v.23 no.9
• /
• pp.866-877
• /
• 2022

Objective: The optimal imaging approach for evaluating pathological nipple discharge remains unclear. We investigated the value of adding ductography to ultrasound (US) for evaluating pathologic nipple discharge in patients with negative mammography findings. Materials and Methods: From July 2003 to December 2018, 101 women (mean age, 46.3 ± 12.2 years; range, 23-75 years) with pathologic nipple discharge were evaluated using pre-ductography (initial) US, ductography, and post-ductography US. The imaging findings were reviewed retrospectively. The standard reference was surgery (70 patients) or > 2 years of follow-up with US (31 patients). The diagnostic performances of initial US, ductography, and post-ductography US for detecting malignancy were compared using the McNemar's test or a generalized estimating equation. Results: In total, 47 papillomas, 30 other benign lesions, seven high-risk lesions, and 17 malignant lesions were identified as underlying causes of pathologic nipple discharge. Only eight of the 17 malignancies were detected on the initial US, while the remaining nine malignancies were detected by ductography. Among the nine malignancies detected by ductography, eight were detected on post-ductography US and could be localized for US-guided intervention. The sensitivities of ductography (94.1% [16/17]) and post-ductography US (94.1% [16/17]) were significantly higher than those of initial US (47.1% [8/17]; p = 0.027 and 0.013, respectively). The negative predictive value of post-ductography US (96.9% [31/32]) was significantly higher than that of the initial US (83.3% [45/54]; p = 0.006). Specificity was significantly higher for initial US than for ductography and post-ductography US (p = 0.001 for all). Conclusion: The combined use of ductography and US has a high sensitivity for detecting malignancy in patients with pathologic nipple discharge and negative mammography. Ductography findings enable lesion localization on second-look post-ductography US, thus facilitating the selection of optimal treatment plans.

• Journal of Life Science
• /
• v.18 no.9
• /
• pp.1225-1229
• /
• 2008

A total of 10 polymorphic microsatellite markers on bovine chromosome 5 were used for allelic association tests with phenotypic characteristics in Hanwoo. The data analyzed in this study were collected from 326 steers. Chi-square tests were performed to compare the frequencies of individual alleles between the high and the low breeding value groups. The following breeding values were analyzed for QTL effects. The frequency of allele 239 of DIK2828 showed a significant difference between the high and the low breeding value groups in the breeding value of marbling score (MSBV). The allele 279 of BMC1009 was found to show significant differences in allelic distribution for the breeding value of cold carcass weight (CWBV) and the breeding value of backfat thickness (BFBV) and allele 285 showed significant differences in allelic distribution for CWBV, BFBV, and MSBV. The allele 200 of DIK4329 showed significant differences in allelic distributions for the breeding values of longissimus muscle area (LMABV) and BFBV. In this study, we identified the QTL for carcass traits at around 20 (DIK2828), 41 (BMC1009) and 95 (DIK4329) cM in chromosome 5. The results provided a useful reference for further positional candidate gene research and marker-assisted selection for fat metabolism and carcass traits.

• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.1039-1050
• /
• 2014

The goal of this study is to demonstrate the diversity of model performance for various climatic elements and indicators. We evaluated the skills of the most advanced 17 General Circulation Models (GCMs) i.e., CMIP5 (Climate Model Inter-comparison project, phase 5) climate models in reproducing retrospective climatology from 1950 to 2000 over the Southeast US for the key climatic elements important in the hydrological and agricultural perspectives (i.e., precipitation, maximum and minimum temperature, and wind speed). The biases of raw CMIP5 GCMs were estimated for 16 different climatic indicators that imply mean climatology, temporal variability, extreme frequency, etc. using a grid-based observational dataset as reference. Based on the error (RMSE) and correlation (R) of GCM outputs, the error-based GCM ranks were assigned on average over the indicators. Overall, the GCMs showed much better accuracy in representing mean climatology of temperature comparing to other elements whereas few GCM showed acceptable skills for precipitation. It was also found that the model skills and ranks would be substantially different by the climatic elements, error statistics applied for evaluation, and indicators as well. This study presents significance of GCM uncertainty and the needs of considering rational strategies for climate model evaluation and selection.

• Korea journal of population studies
• /
• v.19 no.1
• /
• pp.73-92
• /
• 1996

There are basically three approaches of surveys on the economically active population, namely Labor Force Approach (or Current Status Approach), Usual Status Approach, and Gainful Worker Approach. The selection of an approach among these approaches to be applied to a survey or population census should take into considerations the purpose and background of the survey or the census and the socio-economic situation of a country. In the Korean Population and Housing Census series which have been taken almost every five years since its first round in 1925, a sample survey on the economically active population has been adopted since the 1960 round of census. Even if the labor force approach continued to be applied to the censns prior to 1980, the approach has been different from one round to another in recent rounds. It may be suggested that the labor force approach continue to be adopted for the Korean Population and Housing Census for the following reasons: 1) the proportion of seasonal workers to the total workers is very small, 2) the proportion of population whose type of activity for a specific duration is different from that for one year is small, 3) the approach for the census should be the same as that for a variety of sample surveys on the economically active population which adopt the labor force approach, since the census functions as a population as well as a bench mark for those sample surveys, 4) an application of labor force approach will facilitate international comparisons since most of countries that conduct a population census adopt this approach, 5) the labor force approach can improve the reliability of results, thanks to its short reference period, etc.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.303-311
• /
• 2019

Various colors of fruit skin and flesh are the most popular commercial criteria for peach classification. In order to breed new red-fleshed peach cultivar, many cross seedlings and generations should be maintained. Therefore it is necessary to develop early selection markers to screen seedlings with target traits to increase breeding efficiency. For the comparison of transcription profiles in peach cultivars differing in flesh color expression, two cDNA libraries were constructed. Differences in gene expression between red-fleshed peach cultivar, 'Josanghyeoldo' and white-fleshed peach cultivar, 'Mibaekdo' were analyzed by next-generation sequencing (NGS). Expressed sequence tag (EST) of clones from the two cultivars were selected for nucleotide sequence determination and homology searches. Putative single nucleotide polymorphisms (SNP) were screened from peach EST contigs by high resolution melting (HRM) analysis displayed specific difference between 8 red-fleshed peach cultivars and 24 white-fleshed peach cultivars. All 72 pairs of SNPs were discriminated and the HRM profiles of amplicons were established. In the study reported here, the development of SNP markers for distinguishing between red and white fleshed peach cultivars by HRM analysis offers the opportunity to use DNA markers. This SNP marker could be useful for peach marker assisted breeding and provide a good reference for relevant research on molecular mechanisms of color variation in peach cultivars.

• Animal Bioscience
• /
• v.34 no.7
• /
• pp.1193-1201
• /
• 2021

Objective: According to market demand, meat duck breeding mainly includes 2 breeding directions: lean Pekin duck (LPD) and fat Pekin duck (FPD). The aim of the present study was to compare carcass and meat quality traits between 2 strains, and to provide basic data for guidelines of processing and meat quality improvement. Methods: A total of 62 female Pekin ducks (32 LPDs and 30 FPDs) were slaughtered at the age of 42 days. The live body weight and carcass traits were measured and calculated. Physical properties of breast muscle were determined by texture analyzer and muscle fibers were measured by paraffin sections. The content of inosine monophosphate (IMP), intramuscular fat (IMF) and fatty acids composition were measured by high-performance liquid chromatography, Soxhlet extraction method and automated gas chromatography respectively. Results: The results showed that the bodyweight of LPDs was higher than that of FPDs. FPDs were significantly higher than LPDs in subcutaneous fat thickness, subcutaneous fat weight, subcutaneous fat percentage, abdominal fat percentage and abdominal fat shear force (p<0.01). LPDs were significantly higher than FPDs in breast muscle thickness, breast muscle weight, breast muscle rate and breast muscle shear force (p<0.01). The muscle fiber average area and fiber diameter of LPDs were significantly higher than those of FPDs (p<0.01). The muscle fiber density of LPDs was significantly lower than that of FPDs (p<0.01). The IMF of LPDs in the breast muscle was significantly higher than that in the FPDs (p<0.01). There was no significant difference between the 2 strains in IMP content (p>0.05). The polyunsaturated fatty acid content of LPDs was significantly higher than that of FPDs (p<0.01), and FPDs had higher saturated fatty acid and monounsaturated fatty acid levels (p<0.05). Conclusion: Long-term breeding work resulted in vast differences between the two strains Pekin ducks. This study provides a reference for differences between LPD and FPD that manifest as a result of long-term selection.