• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1199-1201
• /
• 2005

In the synthetic aperture radar (SAR) system, the motion error is the main phase error sources and the motion compensation is very important. The phase gradient autofocus (PGA) is a state of art technique for phase error correction of SAR. It exploits the redundancy of the phase-error information among range bins by selecting the strongest scatter for each range bin and synthesizes them. The motivation of this paper is based on the observation that the redundancy of phase error is also among the cross-range direction. Moreover, the proposed method applies the weighting function to better utilize the phase error information. The validity of the proposed scheme for PGA is tested with some numerical simulation.

• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.34-42
• /
• 2010

Reliability is an important issue in cascaded H-bridge converters (CHB converters) because they use a high number of power semiconductors. A faulty power cell in a CHB converter can potentially lead to expensive downtime and great losses on the consumer side. With a fault-tolerant control strategy, operation can continue with the undamaged cells; thus increasing the reliability of the system. In this paper, the operating principles and the control method for a CHB multilevel rectifier are introduced. The influence of various faults on the CHB converter is investigated. The method of fault diagnosis and the bypassing of failed cells are explained. A fault-tolerant protection strategy is proposed to achieve redundancy in the CHB rectifier. The redundant H-bridge concept helps to deal with device failures and to increase system reliability. Simulation results verify the performance of the proposed strategy.

• 한국정밀공학회지
• /
• 제13권8호
• /
• pp.60-71
• /
• 1996

Mostof existing CAD systems do not provide the advanced function for systematic checking of design and drafting errors in mechanical drawings. We have reported a computer aided drawing check system to single plane projection drawings made by a CAD system. This paper describes a checking method of dimensioning errors in mechanical drawings. The checking items are deficiency and redundancy of dimensions, input-errors in dimension figures and symbols, etc. Checking for deficiency and redundancy of global dimensions has been performed applying Graph Theory. This system has been applied to several examples and we have confirmed the feasibility of this checking method.

• 전자공학회논문지B
• /
• 제30B권7호
• /
• pp.14-23
• /
• 1993

This paper proposes an algorithm to reduce the bitrate for transmission of MCP(motion compensated prediction) error signals. Many digital image coders have recently employed hybrid coding schemes which perform motion compensation, DCT transform, quantization, and variable length coding. The variable length coding compresses the quantized DCT coefficient data by removing their statistical redundancy. But some DCT blocks have the interblock statistical redundancy as well as the intrablock one. To utilize both of them, the DCT blocks are classified into the interleaving group and the non-interleaving group. And then each DCT blocks in the interleaving group are is encoded independently, and the DCT blocks in the interleaving group are encoded after interleaving the DCT coefficients. Through the simulations, it is shown that the proposed method outperforms the conventional method in which each DCT block is encoded independently.

• 전력전자학회논문지
• /
• 제20권3호
• /
• pp.273-279
• /
• 2015

A zero vector selection method to reduce switching losses for model predictive control (MPC) of voltage source inverter is proposed. A conventional MPC of voltage source inverter has not been proposed, and a method to select the redundancy of the zero vector is required for this study. In this paper, the redundancy of the zero vectors is selected with generating a zero sequence voltage to reduce switching losses. The zero vector of 2-level inverter is determined by determining sign of the zero sequence voltage. In the proposed method, the quality of the current is retained and switching loss can be reduced compared with the conventional method. This result was verified by P-sim simulation and experiments.

• 한국통신학회논문지
• /
• 제33권10C호
• /
• pp.787-797
• /
• 2008

본 논문에서는 스테레오 정합에 사용되는 다이내믹 프로그래밍을 기반으로 영상의 시 공간적 중복성을 고려한 고속 변이 추정 기법을 제안한다. 영상 내 인접한 화소 간에 존재하는 높은 상관성을 이용하여 격행으로 다이내믹 프로그래밍 기반의 변이 추정을 수행하고 변이가 할당되지 않은 라인은 동일영역 내에서의 변이가 유사하다는 성질을 이용하여 주변의 변이벡터로 할당하였다. 또한 동영상의 변이 추정 시에는 프레임 간의 시간적 중복성을 고려한 알고리즘으로 수행시간을 크게 단축시킬 수 있었다. 모의 실험을 통하여 변이 정보를 이용한 중간시점 영상 생성 결과 블록매칭 알고리즘에 비하여 $0.8{\sim}2.4dB$의 PSNR(peak signal to noise ratio)이 증가하는 것을 확인하였다. 또한 일반적인 다이내믹 프로그래밍 기반의 변이 추정 방식과의 비교에서도 0.1dB가량의 PSNR이 증가하였으며 약 $48{\sim}68%$의 계산량이 감소하는 것을 확인 할 수 있었다.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1218-1223
• /
• 2019

HVDC 시스템에서 풀-브리지 서브 모듈 구조는 하프브리지 서브 모듈에 비해 부품 수가 증가하지만 100 % 여유율 확보가 가능하여 고장률을 크게 줄일 수 있다. 그러나 풀-브리지 서브 모듈은 여유율 보장과 암(arm) 단락 방지를 위한 데드 타임(dead-time)을 확보하기 위해 복잡한 제어 알고리즘이 필요하다. 이 문제를 해결하기 위해 풀-브리지 서브 모듈과 동일한 부품 수와 100 % 여유율을 갖는 병렬 하프브리지 구성의 고장률을 분석한다. 기존의 부품 고장 분석에 고장나무분석 방법을 적용하여 서브 모듈의 동작 위험을 반영함으로써 서브 모듈의 수명주기를 보다 정확하게 예측할 수 있다. 병렬 하프브리지 서브모듈의 타당성 검증을 위해 FTA 기반 분석 방법과 기존의 PCA 기반 방법으로 분석된 고장률을 비교한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권5호
• /
• pp.1013-1027
• /
• 2011

In this paper we propose ATCS, a practical TCP protocol coding scheme based on network coding for satellite IP networks. The proposal is specially designed to enhance TCP performance over satellite networks. In our scheme, the source introduces a degree of redundancy and transmits a random linear combination of TCP packets. Since the redundant packets are utilized to mask packet loss over satellite links, the degree of redundancy is determined by the link error rates. Through a simple and effective method, ATCS estimates link error rates in real time and then dynamically adjusts the redundant factor. Consequently, ATCS is adaptable to a wide range of link error rates by coding TCP segments with a flexible redundancy factor. Furthermore, the scheme is compatible with traditional TCP variants. Simulation results indicate that the proposal improves TCP performance considerably.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제21권1호
• /
• pp.37-46
• /
• 2015

Purpose : With a recently growing population of the disabled, the importance of creating the living environment for them has been emphasized, making the design guidelines to play more important role in this sense. This research aims to generalize the existing design guidelines for the housing for the disabled, diagnose their problems, and suggest a systematic and consistent milestone of the guidelines developed in the future. Method : The analysis objects of this research are 1910 categories of the design guidelines for the domestic housing for the disabled, and the research removed the redundancy and separated multi-complex categories. A total of 1424 independent categories were extracted, and been conducted content analysis from three aspects of redundancy, sub-categorization system and descriptive form based on the extracted categories. Results : Redundancy analysis figured out important characteristics by space. Moreover, the current guideline system can be integrated by analysis of sub-category system. Lastly, the research found that the guidelines need to be understood more easily and suggested under accurate criteria by analyzing the descriptive forms. Implication : This research holds significance as a fundamental data to improve the design guidelines for the disabled in the future, ultimately contributing to a better quality of life of the disabled.

• 한국통신학회논문지
• /
• 제34권7B호
• /
• pp.744-750
• /
• 2009

본 논문에서는 신뢰성을 명가하는 데 있어서 소프트웨어 및 하드웨어 측면을 고려한 통합된 마코브 모델링(Markov modeling)으로 AVTMR(AlI Voting Triple Modular Redundancy) 시스템의 신뢰성을 분석한다. 본 시스템의 모델링은 하드웨어의 경우에 고장율이 시불변 특성을 가지며, 소프트웨어 경우에는 시 가변 특성으로 모델링되어 AVTMR 시스템과 단일 시스템에 대한 신뢰성 비교를 한다. 특히, 소프트웨어적인 특성은 G-O/NHPP 기법을 이용하여 분석이 되며, AVTMR 시스템의 전체적인 특성을 소프트웨어 및 하드웨어적인 관점에서 고장율 따른 특성을 이해할 수 있게 된다. 평가된 AVTMR 은 엄베디드 통신 시스템, 항공기 등의 결함 허용 시스댐에 요구되는 스팩에 맞도록 설계를 하기 위한 기반을 제시한다.