• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.11
• /
• pp.551-555
• /
• 2004

In this paper, in order to reduce the high COO (cost of ownership) and COC (cost of consumables), we have collected the silica abrasive powders by filtering method after subsequent CMP (chemical mechanical polishing) process for the purpose of abrasives recycling. And then, we have studied the possibility of recycle of reused silica abrasive through the analysis of particle size distribution and FE-SEM (field emission-scanning electron microscope) measurements of abrasive powders. It was annealed the collected abrasive powders to promote the mechanical strength of reduced abrasion force. Finally, we compared the CMP characteristics between self-developed KOH-based silica abrasive slurry and original slurry. As our experimental results, we obtained the comparable rate of removal and good planarity with commercial products. Consequently we can expect the saving of high cost slurry.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.06a
• /
• pp.25-48
• /
• 1998

Current topics related to membrane technology under the recent water environment are as follows: - Cryptosporidum Outbreak - Integrity Control System - Water re-use - Recycle Society - Biotreatment and Membrane - Slurry or Sludge Treatment I would like to introduce the actual examples regarding water re-use. mainly on the above 5 topics.

• Journal of Animal Environmental Science
• /
• v.20 no.4
• /
• pp.195-200
• /
• 2014

Liquid fertilization of pig manure slurry is very useful treatment method to recycle organic waste matter as a valuable fertilizer. The solids precipitate and accumulated at the bottom of liquid fertilization tank. The content of nitrogen and phosphate are higher in sediment than pig manure slurry. The pH of sediment was 7.53. S-COD/T-COD ratio of pig manure slurry and sediment were 0.477, 0.29, respectively. The moisture content of sediment of pig manure slurry and sediment were 80.45~83.82%, 97%, respectively. The content of organic matter of sediment was 8.79~10.56%. The content of nitrogen and phosphate of sediment and pig manure slurry were 9,000~11,100 mg/L, 9,100~11,100 mg/L, respectively. The particle size of pig manure slurry was distributed from 2 mm to 0.125 mm. On the other hand. the particle size of sediment was under 0.125 mm.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.4
• /
• pp.252-256
• /
• 2013

This study investigated the effect of slurry additives on reducing the concentration of odorous compounds. Slurry treatments included control, horseradish, spent mushroom, and almond hull (n = 4 each group). Odorous compounds including volatile organic compounds (VOCs phenols and indoles) and volatile fatty acids (VFAs short chain FA, SCFA, and branched chain FA, BCFA) were analyzed. Pigs of 85~120 kg body weight were fed diets formulated to meet the Korean Feeding Standard (2012) and their excretion was sampled from slurry pits. VOCs decreased (p<0.05) in horseradish, spent mushroom, and almond hull, compared to the control. SCFA was lower (p<0.05) in the horseradish group and BCFA was lower (p<0.05) in all three treatment groups compared to the control. Taken together, the tested additives are effective in reducing odorous compounds in pig slurry, indicating that the use of spent mushroom and almond hull can not only recycle the agri-byproduct but also reduce the impact of odors on surrounding communities.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.4
• /
• pp.486-492
• /
• 2004

CMP (Chemical mechanical polishing) is inevitable process to overcome $0.2{\mu}m$ wire thickness in semiconductor industry. In this study, effect of pressure to separate used CMP slurry into solid and liquid for recycle and reuse by ultrafiltration was investigated. Also, water quality after the ultrafiltration such as turbidity and TDS was evaluated. The material of membrane used in the study was PVDF. The used CMP contained 0.5% of solid content and then concentrated up to 18% by weight. The used CMP can not be concentrated higher than 18% because of viscosity and abrasion of pump. The tested feed pressures were 22.1, 29.4 and 36.8 psi. The results have shown that operating at 36.8 psi has advantages on operation time and total flux. The specific flux showed some variation at 1 to 15 of concentration factor but no difference after 15 of concentration factor. Mass balance of solid at initial stage of the operation showed some unbalance because of deposition of solid on the membrane, which was main reason to reduce flux. Turbidity was very stable at lower than 0.2NTU for 22.1 and 36.8 psi of feed pressure.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.3
• /
• pp.110-116
• /
• 2016

Biogas yields point of view, the possibility of reusing excess sludge treated by thermal pretreatment for the purpose of improving the efficiency of the anaerobic digestion process has been investigated in recent year. Thermal pretreatment technology was considered as a pretreatment technique to improve excess sludge properties because of the solubilization of particulate organics. As a view point of sludge reduction and recycle, however, many researchers focused on the ability of particulate hydrolysis and COD solubilization under a high temperature, and few reports have addressed on the physical/chemical characteristics changing. This research was performed to evaluate the effects of a various temperature and chemical additives on carbon formation and fractionation in treated slurry from thermal pretreatment. Based on the results, it was revealed that oxidants injection and temperature changing have significantly caused the change of carbon fractions in slurry from thermal pretreament. Especially, it was considered that the efficiencies of particle hydrolysis increased with the increase of the reaction temperature. Low molecular weight(Mw < 350 g/mol) organic carbon formation increased with the increase of oxidants injection. It was expected that results of this research will provide an overview of the characteristics of thermal pretreatement for excess sludge reduction and recycle.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.2
• /
• pp.73-80
• /
• 2007

The preparation of oil absorbent using waste polyurethane was studied. And the effects of shape, size, and contents of waste polyurethane foam was investigated. The waste foam was treated in shape of powder, cube and bar type generated from rigid sandwich panel process. The tests for flexural strength, combustibility, and water absorptivity were carried out to investigate the mechanical and physical properties of the recycled foams. And the cell microstructure was evaluated through Scanning Electron Micrograph. The recycled foam containing powder-shaped underfilled and showed poor properties that was generated through reactivity of the resins and increasing of slurry viscosity. For the recycled foam with the cube and bar-shaped, the underfilling was caused by interference between the waste PUFs and increasing surface areas of PUF. Low cell density, non-uniformity of cell shape and size, and low adhesion of the boundary surface (new/recycled) was showed as a result of the poor properties. Considering underfilling and the properties of PUF (new/recycled), maximum recycle contents were less than 20 wt% for the powder and above 40 wt% for the cube and bar.

• Journal of Animal Environmental Science
• /
• v.20 no.2
• /
• pp.69-76
• /
• 2014

This study was aimed at investigating a filtration bed system for the production of liquid fertilizer using wastewater generated after anaerobic digestion of animal manure. Slurry, Compost, & Biofiltration-Methane System, designed by Korean National Institute of Animal Science, is now a standard method to recycle anaerobic digestion wastewater. However, currently provided protocol to run the system needs continuous upgrades as the system is relatively new and can be more cost-effective if few adjustments are made. In this study, we tried to enhance the capability of the system to process anaerobic digestion wastewater by replacing the bed materials with the cheaper one, and determining the time point of operation from which filtrates can be utilized for fertilization.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.11
• /
• pp.27-36
• /
• 2010

This study was conducted to evaluate physicochemical parameters; temperature, pH, C/N ratio, water content, organic contents and volume in a pilot-scale(capacity : $100m^3$) ultra thermophilic aerobic composting. There were three types input: municipal wasted sludge, livestock manure and slurry, and food waste produced in Jung-Eb city. Each target material was carried out by the first fermentation(organic waste + seed culture) and the second one(organic waste + seed culture + recycle compost), respectively. During composting, only with supply of air and mixing, the temperature increased $90{\sim}105^{\circ}C$ after every mixing in both periods. The changes of pH, $O_2$, $CO_2$ and $NH_3$ represented typical organic decomposition pattern by microorganisms. Also, all other physicochemical parameters of ultra thermophilic aerobic composting process showed similar or better performance than these of general aerobic composting. Heavy metal concentration of fermented compost adapted to compost fertilizer regulation standard in the heavy metal and hazardous analysis.

• KSBB Journal
• /
• v.10 no.3
• /
• pp.304-316
• /
• 1995

For fuel alcohol production, enzymatic liquefaction and saccharification of tapioca starch by ${\alpha}$-amylase and glucoamylase were studied. The thermophilic ${\alpha}$-amylase Termamyl produced from Bacillus licheniformis gave a better liquefaction than the relalively low temperature enzyme BAN from B. subtilis. Oplimal temperature and pH with Termamyl were $90∼95^{\circ}C$ and 5.8, respectively. Minimal amount of Termamyl 240uc for a satisfactory liquefaction for a two-hour reaction was about 0.0125% (v/w) with respect to the mass of tapioca used. For saccharification experiments two enzymes, Novo AMG and Do-I1 enzymes were compared. The enzymatic activity of each enzyme was a little different depending on the substrate used and the latter was found to have a significant amount of ${\alpha}$-amylase activity. With Novo AMG optimal temperature was about $58^{\circ}C$ The pH optimum was 4.3 with maltose, however, with tapioca, no difference was observed between pH 4.3 and 5.7 which is a natural, unadjusted pH of liquefied tapioca. For 85% of completion of saccharification, it was necessary to use 0.0625% (v/w) of Novo AMG 400L for tapioca and to run the reaction for more than 10 hr, Packed volume of solid particles in tapioca slurry remained at around 30% during liquefaction and saccharification. This indicates that the removal of the solid particle before fermentation is not economically feasible at all, even though the solid particles make it very difficult to operate the bioreactor in a continuous mode with cell-recycle.