• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.279-281
• /
• 2006

A Voltage Instability Predictor(VIP) estimates the proximity of a power system to voltage collapse in real time. Voltage Instability Index(Z-index) from VIP algorithm is estimated using LS(Least Square) method. But this method has oscillations and noise of result due to the system's changing conditions. To suppress oscillations, a larger data window needs to be used. In this paper. I propose the new other method which improves that weakness. It uses RLS(Recursive Least Square) to estimate voltage instability index without a large moving data window so this method is suitable for on-line monitor and control in real time. In order to verify effectiveness of the algorithm using RLS method, the method is tested on HydroQuebec system in real time digital simulator(HYPERSIM).

• The Journal of the Acoustical Society of Korea
• /
• 제23권4E호
• /
• pp.103-107
• /
• 2004

In this Paper, we propose an algorithm called partitioned recursive least square (PRLS) that involves a procedure that partitions a large data matrix into small matrices, applies RLS scheme in each of the small sub matrices and assembles the whole size estimation vector by concatenation of the sub-vectors from RLS output of sub matrices. Thus, the algorithm should be less complex than the conventional RLS and maintain an almost compatible estimation performance.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권3호
• /
• pp.139-143
• /
• 1999

This paper is on realization of the speed-sensorless vector control of an induction motor using the RLS(Recursive Least Square) algorithm. The speed estimator is including the RLS algorithm and a rotor flux observer. The RLS algorithm has speed and rotor time constant as parameter vectors and rotor flux observer is designed to have robustness to stator resistance variation and through the IP(Integral and Proportional) speed controller stable performance is obtained for estimating rotor speed. Finally the total algorithm are realized in induction motor drive system and its effectiveness is verified.

• 전기학회논문지
• /
• 제67권2호
• /
• pp.248-254
• /
• 2018

In this paper, a Monte Carlo-based Recursive Least Square(MC-RLS) method is presented to directly identify the inverse model of the dynamical system. Although a RLS method has been used for the identification based on the deterministic data in the closed loop controlled form, it would be better for RLS to identify the model with random data. In addition, the inverse model obtained by inverting the identified forward model may not work properly. Therefore, MC-RLS can be used for the inverse model identification without proceeding a numerical inversion of an identified forward model. The performance of the proposed method is verified through experimental studies on a control moment gyroscope.

• 한국통신학회논문지
• /
• 제35권9C호
• /
• pp.735-742
• /
• 2010

본 논문에서는 다수의 송신 안테나와 수신 안테나를 갖는 RF 중계기를 위한 적응 간섭제거 알고리즘을 제안한다. 중계기에서 다수의 안테나를 사용하는 경우 송신 안테나와 수신 안테나간의 불완전한 격리로 인해 간섭이 발생하고, 궤환 간섭 경로는 MIMO (multi-input multi-output) 채널로 모델링된다. 이런 궤환 간섭을 제거하기 위해 적응 신호처리 기법에 기반하여 LMS (least mean square) 간섭제거 알고리즘과 RLS (recursive least squares) 간섭제거 알고리즘을 유도한다. 모의 실험을 통해 제안된 간섭 제거 알고리즘의 수렴 특성 및 정상 상태에서의 간섭 제거 성능을 비교한다.

• 로봇학회논문지
• /
• 제13권1호
• /
• pp.55-62
• /
• 2018

In this paper, a method for estimation of external force on an end-effector using joint torque sensor is proposed. The method is based on portion of measure torque caused by external force. Due to noise in the torque measurement data from the torque sensor, a recursive least-square estimation algorithm is used to ensure a smoother estimation of the external force data. However it is inevitable to create a delay for the sensor to detect the external force. In order to reduce the delay, modified recursive least-square is proposed. The performance of the proposed estimation method is evaluated in an experiment on a developed six-degree-of-freedom robot. By using NI DAQ device and Labview, the robot control, data acquisition and The experimental results output are processed in real time. By using proposed modified RLS, the delay to estimate the external force with the RLS is reduced by 54.9%. As an experimental result, the difference of the actual external force and the estimated external force is 4.11% with an included angle of $5.04^{\circ}$ while in dynamic state. This result shows that this method allows joint torque sensors to be used instead of commonly used external sensory system such as F/T sensors.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1991년도 학술발표회 논문집
• /
• pp.23-27
• /
• 1991

RLS(Recursive Least Squares)나 LMS(Least mean square)등은 알고리듬 고유의 성질상 잡음이 섞인 시스템에 있어서는 올바른 역 모델링을 할 수 없다. 따라서, 잡음의 영향을 받지않는 견실한(robust) 모델 추정 알고리듬이 필요하다. 본 논문에서는 잡음환경하에 있는 시스템을역 모델링하는데 있어서, 잡음의 영향을 줄이기위해 완전최소자승법을 도입하고 기존의 최소자승법과 비교 실험하였다. 그리고, 이 방법의 적응 알고리듬을 제안하였으며, RLS(Recursive least squares)와 그 성능을 비교하여 타당성을 검토하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권7호
• /
• pp.3543-3557
• /
• 2017

Compression is a very important technique for remotely sensed hyperspectral images. The lossless compression based on the recursive least square (RLS), which eliminates hyperspectral images' redundancy using both spatial and spectral correlations, is an extremely powerful tool for this purpose, but the relatively high computational complexity limits its application to time-critical scenarios. In order to improve the computational efficiency of the algorithm, we optimize its serial version and develop a new parallel implementation on graphics processing units (GPUs). Namely, an optimized recursive least square based on optimal number of prediction bands is introduced firstly. Then we use this approach as a case study to illustrate the advantages and potential challenges of applying GPU parallel optimization principles to the considered problem. The proposed parallel method properly exploits the low-level architecture of GPUs and has been carried out using the compute unified device architecture (CUDA). The GPU parallel implementation is compared with the serial implementation on CPU. Experimental results indicate remarkable acceleration factors and real-time performance, while retaining exactly the same bit rate with regard to the serial version of the compressor.

• 전력전자학회논문지
• /
• 제5권6호
• /
• pp.575-583
• /
• 2000

본 논문에서는 이관성 시스템의 기계계 파라미터의 새로운 추정 알고리즘을 제안한다.RLS(Recursive Least Square) 알고리즘과 가속도정보를 이용하여 이관성 시스템의 부하의 관성, 전동기 관성 그리고 축강성을 추정하고 시뮬레이션과 실힘을 통해 제안된 기법의 유효성을 검증한다.

• 전력전자학회논문지
• /
• 제6권5호
• /
• pp.446-452
• /
• 2001

본 논문에서는 Kharitonov 견실 제어 이론을 적용하여 유도 전동기 관성 변동에 대한 새로운 속도 제어기 설계기법을 제안한다. 정속도 운전을 하는 경우 관성의 변화는 운전 성능을 저하시키는 요인이 되며 운전 중 발생되는 관성의 변화는 제어기를 포함한 전체 시스템 특성방정식의 근을 이동함으로 시스템의 속응성에 영향을 주게된다. RLS (Recursive Least Square) 알고리즘을 이용하여 관성 변화를 추정하고 이를 기반으로 안정도 마진을 포함하는 속도 제어기 이득을 설정한다. 또한 시뮬레이션과 실험을 통해 제안된 기법의 유효성을 검증한다.