• 설비공학논문집
• /
• 제23권4호
• /
• pp.281-286
• /
• 2011

The objective of this study is to optimize the four-bed six-step pressure swing adsorption(PSA) process for high purity $CH_4$ recovery from the biogas. The effects of P/F(purge to feed) ratio and cycle time on the process performance were evaluated. The cyclic steady-states of PSA process were reached after 12 cycles. The purity and recovery rate of product gas, pressure and temperature changes were constant as the cycle repeated. It was shown that the P/F ratio gave significant effect on the product recovery rate by increasing the amount of purge gas in purge and regeneration step. The optimal P/F ratio was found to be 0.08. As the cycle time increased, the product purity decreased by increasing the feed gas flow rate. It was found that the optimal operating conditions were P/F ratio of 0.08 and total cycle time of 1,440 seconds with the purity of 97%.

• Journal of Applied Biological Chemistry
• /
• 제55권3호
• /
• pp.149-156
• /
• 2012

The effects of solvent type and concentration, solid/liquid ratio, extraction time and repeated extraction on recovery of keratinase from solid-state fermentation (SSF) of chicken feather by a local Streptomyces sp. NRC 13S were investigated in order to establish the experimental conditions for keratinase yield. Among solvents tested, 0.5% (v/v) glycerol was the best. Box-Behnken design was used to investigate the effect of relevant variables on keratinase recovery. The factors investigated were solid/liquid ratio (1:1.66-1:6.66 g/mL), glycerol concentration (0.5-5% v/v) and repeated extraction (1-5 cycle). The results showed that the maximum recovery of keratinase (6933.3 U/gfs) was obtained using 0.5 (v/v) glycerol as extracting solvent, in a solid/liquid ratio of 1:5 and three extraction cycles.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2003년도 추계 학술발표회 논문집
• /
• pp.299-304
• /
• 2003

Heat regenerator occupied by regenerative materials improves thermal efficiency of regenerative combustion system through the recovery of sensible heat of exhaust gases. By using one-dimensional two-phase fluid dynamics model, the unsteady thermal flow of regenerators with spherical particles were numerically analyzed to evaluate performance of ratio of waste heat recovery and temperature efficiency and to suggest optimized conditions of heat regenerator. It is predicted that exhaust gases temperature at regenerator outlet of 3.5$\times$10$^{6}$ kcal/hr heat regenerator is even lower than design condition and ratio of waste heat recovery is 75.8％.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.184-185
• /
• 2006

The flux-lock type superconducting fault current limiter (SFCL) has the attractive characteristics that can adjust the current limiting level by the turns ratio between two coils. Since the recovery characteristics of a superconducting element m the flux-lock type SFCL were dependent on the turns ratio between two coils, the analysis for the recovery characteristics of this type SFCL together with the current limiting characteristic is necessary to apply it to power system. When the applied voltage and load impedance were same, the recovery time of the superconducting element was 0.32sec in case that the turn's ratio between the primary and secondary windings was 63:21. In the meantime, when the turn's ratio of secondary winding increased to 3 times, the recovery time became longer to 0.58sec.

• 멤브레인
• /
• 제26권2호
• /
• pp.159-165
• /
• 2016

다단기체분리 공정을 수행하기 위해 폴리이미드 중공사막 모듈을 제조하여 혼합기체 $N_2$ : $SF_6$ = 50 : 50에 대한 기체분리특성을 확인하였다. 제조된 중공사막 모듈은 0.5 MPa에서 stage cut을 조절하여 투과 유량, 농도 등의 성능을 측정하였다. 중공사막 모듈은 1단 분리 테스트에서 $N_2/SF_6$ 선택도가 높을수록 동일한 stage cut에서 높은 $SF_6$ 회수율을 얻을 수 있었다. 1단 시험결과에 따라 $SF_6$ 회수율과 농축농도를 동시에 높이기 위해 2단 기체 분리 테스트 진행함으로써 $SF_6$ 회수율 95% 이상, $SF_6$ 회수농도 98% 이상을 농축할 수 있었다.

• 한국가스학회지
• /
• 제21권2호
• /
• pp.1-9
• /
• 2017

최근 석탄층 메탄가스(Coalbed Methane, CBM)의 회수증진을 위해 석탄층에 $CO_2$나 $N_2$ 가스를 주입하는 ECBM (enhanced coalbed methane recovery)공법이 주목받고 있다. ECBM공법은 일반적인 생산기술인 탈수(dewatering)공법에 비해 회수율이 높지만 주입가스의 특성에 따라 메탄가스의 생산 효율이 다르므로, 이를 고려한 주입가스의 혼합 비율 분석이 필요하다. 본 연구에서는 ECBM공법에서 주입가스의 혼합 비율이 메탄가스 회수에 미치는 영향을 분석하고자, CBM 저류층 모델을 구축하고 주입가스의 혼합비율에 따른 메탄가스 회수량 분석과 경제성 평가를 수행하였다. 그 결과, ECBM공법 적용 시 탈수공법을 적용하였을 때 보다 약 2배의 회수율 향상을 보였으며, 혼합가스 주입 시 $CO_2$ 10%와 $N_2$ 90%일 때 메탄가스의 회수량이 가장 높게 나타났다. 그러나 탄소배출권 거래이익, 주입가스의 비용 및 재생산된 $N_2$ 가스 처리비용 등을 고려한 경제성 평가 결과, 주입가스의 혼합비율이 $CO_2$ 20%와 $N_2$ 80%일 때 최종생산이익이 가장 높게 나타남을 확인하였다. 따라서 향후 ECBM 공법 적용 시 메탄가스의 회수율뿐만 아니라 경제성을 고려한 기준으로 주입가스의 혼합비율을 설계해야 한다.

• Journal of Chest Surgery
• /
• 제25권11호
• /
• pp.1169-1179
• /
• 1992

To determine the period and degree of full recovery of postoperative pulmonary function, the author performed seiral pulmonry function test with spirometry at preoperative period and 1st, 2nd, 3rd, 4th, 6th and 8th postoperative week in 64 patients who underwent chest surgery form 1990. 1. to 1990. 8. at Dep. of Thoracic & Cardiovascular surgery, Pusan National University Hospitcal, Pusan, Korea 28 patients underwent lung resection[Group A], 14 patients mediastinal and other thoracic surgery[Group B], and 22 patients heart surgery with cardiopulmonary bypass[Group C]. Al of them recovered normally and discharged without any complications. Their serial changes of pulmonary function test were compaired and its results was as follows; l. Over all mean recovery time of restrictive ventilatory function tests[ie, VC, ERV, IC, FEF1, FVC, FEF200-1200, MVV] were 4th & 6th postoperative week, and that of obstructive ventilatory function tests[ie., EFE25-75%, Vmax50] were 2nd postoperative week. 2. In patient who underwent lung resection surgery[Group A], FEF1 recovered in 4th~6th postoperative week and its ratio to preoperative value was 70% in pneumonectomy, and 75% in lobectomy. FVC recovered in 4th~6th postoperative week and its ratio to preoperative value was 65% in pneumonectomy, and 80% in lobectomy. MVV was recovered in 4th~8th postoperative week and recovery ratio was 80%, FEF200-1200 was recovered at 4th~6th postoperative week and its recovery ratio was 70%, FEF25-75% and Vmax50 was recovered in 2nd~4th postoperative week and recovered nearly to preoperative level. 3. In patient who underwent mediastinal and other thoracic surgery[Group B], FEV1 and FVC and recovered in 4th~6th postoperative week and the recovery ratio of FVC in blebectomy was 90%. MVV reached preoperative level in 4th~8th postoperative week. FEF200-1200, FEF25-75% and Vmax50 were recovered in 2nd~4th postoperative week and the recovery of FEF25-75% and Vmax50 in blebectomy was prominant. 4. In patient who underwent heart surgery[Group C], FEV1 and FVC were recovered in 4th~6th postoperative week. The recover ratio of FEF25-75% and Vmax50 was delaied to 6th~8th postoperative week From the above results we concluded that the recovery time of posoperative restrictive ventilatory disorder was 4th postoperative week and pulmonary complication would possibly occure during that period. So more intensive observations will be needed.

• 대한의용생체공학회:의공학회지
• /
• 제29권1호
• /
• pp.8-16
• /
• 2008

The aim of this study was to evaluate the motor recovery in 4 chronic hemiparetic patients with Fugl-Meyer (FM) and EMG characteristics before and after the training program. The training was performed at 1hr/day, 5days/week during 6 weeks in 4 chronic stroke patients. Electromyographic activities of the affected hand were recorded during isometric wrist flexion/ extension movements. In all patients, FM was significantly improved after the 6-week training. Onset/offset delay of muscle contraction significantly decreased in the affected wrist after the training. The co-contraction ratio of flexor/extensor muscles decreased significantly. Also, onset/offset delay of muscle contraction and co-contraction ratio correlates significantly with upper limb motor impairment and motor recovery. This EMG technique allows an objective evaluation of changes in muscle activity in post-stroke patients, providing easily measurable, quantitative indices of muscle characteristics.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.3-6
• /
• 2003

We have developed a small-sized superconducting magnetic energy storage (SMES) device, which provides electric power with high quality to sensitive electric loads. In large magnets such as the SMES magnets the stability, which is determined by several factors, e.g. conductors cooling condition and operating current, magnets winding structure, is a crucial problem. The effect of the cooling condition, the copper ratio, and the conductor's size upon the recovery currents was investigated experimentally. The results indicate that the recovery current characteristics of the strands vary considerably according to their insulation method. In the fully insulated strands with a low copper ratio, the recovery current densities range from 10 to 20 % of their engineering critical current densities. The recovery current density of the 30-conductor with a cooling channel is about a factor of 1.8 higher than that without a cooling channel.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.329-330
• /
• 2006

This paper presents a recovery technique for images with block-based corruption by transmission losses. Conventional methods that do not consider edge directions can cause blocked blurring artifacts. In this paper, we present a block recovery scheme using Haar wavelet features. The adaptive selection of neighboring blocks is performed based on the energy ratio f wavelet subbands. The lost blocks are recovered by linear interpolation in the spatial domain using selected block pairs. The proposed directional recovery method is effective for the strong edge because it exploits the varying neighboring blocks adaptively according to the edges and the directional information in the image. The proposed method outperforms the previous methods that used only a predefined set of neighboring blocks.