• Title/Summary/Keyword: recovery of set

Search Result 378, Processing Time 0.026 seconds

Determination of Patulin in Commercial Apple Juice in Korea by High Performance Liquid Chromatography (High Performance Liquid Chromatography를 이용한 국내 시판 사과 주스의 Patulin 분석)

  • Cho, Wan-Il;Choi, Young-Boong;Moon, Tae-Wha
    • Korean Journal of Food Science and Technology
    • /
    • v.29 no.3
    • /
    • pp.412-416
    • /
    • 1997
  • Seven brands of commercial apple juice in Korea obtained from local stores were analyzed for patulin. Sep-Pak silica cartridge purification of the extract by ethyl acetate offered a good separation of patulin from other components. Patulin was determined by reverse phase liquid chromatography using a J'sphere $4\;{\mu}m$ ODS-H80 column with an ultraviolet detector set at 274 nm. Patulin concentrations in four samples ranged from 4 to $20\;{\mu}g/L$ and the other three samples from 30 to $45\;{\mu}g/L$. The limit of detection was $3\;{\mu}g/L$, and the recovery was $80{\sim}90%$ at the contamination level of $3.78{\sim}125.9\;{\mu}g/L$.

  • PDF

The Effects of Radix Ophiopogon japonicus on the NC/Nga Atopy Model (소엽맥문동(小葉麥門冬)이 NC/Nga 아토피모델에 미치는 영향)

  • Jang, Sung-Eun;Kim, Yoon-Bum
    • The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
    • /
    • v.21 no.3
    • /
    • pp.10-19
    • /
    • 2008
  • Objective : To investigate the effects of Radix Ophiopogon japonieus on atopic dermatitis, I prepared DNCB(2,4-dinitrochlorobenzen) induced atopic dermatitis NC/Nga mice and observed the mice by four ways; eye observation, the number of skin behavior times, histological changes of skin and cytokine(Total IgE, IL-4, $IFN-{\gamma}$). Methods : After prepare Radix Ophiopogon japonicus extract, DNCB induced atopic dermatitis NC/Nga mice were divided into three groups. The first is Control group which was intact group. The second is Medication group which was orally medicated Radix Ophiopogon japonicus extract one time a day for consecutive 5 days. The third group is Application group which was applied Radix Ophiopogon japonicus extract externally one time a day for consecutive 5 days. After that, the effect of Radix Ophiopogon japonicus on atopic dermatitis was observed. Statistical analysis was performed by using Kmskal-Wallis test and statistical significance was set at less than 5%. Results : 1. Radix Ophiopogon japonicus showed some in both Medication group and Application At observation of skin morphologic change, effects to prevent erythema reaction on skin group. 2. At the number of scratching behavior times, Radix Ophiopogon japonicus showed an effect to decrease scratching behavior times, but there was no statistical significance among three groups. 3. At skin tissue H-E stain, Radix Ophiopogon japonicus showed an effect to prevent skin epidermal tissue damages and also showed that it could keep the skin healthy in both Medication group and Application group. Especially in Application group, the skin of mouse showed almost normal recovery. 4. At cytokines, there was no statistical significance among three groups in IgE and IL-4. But Radix Ophiopogon japonicus showed an significant effect to suppress $IFN-{\gamma}$ in both Medication group and Application group. There was no significant difference between two groups. Conclusion : Radix Ophiopogon japonicus has some effects on atopic dermatitis in both internal medication and external application.

  • PDF

Optimization of Data Recovery using Non-Linear Equalizer in Cellular Mobile Channel (셀룰라 이동통신 채널에서 비선형 등화기를 이용한 최적의 데이터 복원)

  • Choi, Sang-Ho;Ho, Kwang-Chun;Kim, Yung-Kwon
    • Journal of IKEEE
    • /
    • v.5 no.1 s.8
    • /
    • pp.1-7
    • /
    • 2001
  • In this paper, we have investigated the CDMA(Code Division Multiple Access) Cellular System with non-linear equalizer in reverse link channel. In general, due to unknown characteristics of channel in the wireless communication, the distribution of the observables cannot be specified by a finite set of parameters; instead, we partitioned the m-dimensional sample space Into a finite number of disjointed regions by using quantiles and a vector quantizer based on training samples. The algorithm proposed is based on a piecewise approximation to regression function based on quantiles and conditional partition moments which are estimated by Robbins Monro Stochastic Approximation (RMSA) algorithm. The resulting equalizers and detectors are robust in the sense that they are insensitive to variations in noise distributions. The main idea is that the robust equalizers and robust partition detectors yield better performance in equiprobably partitioned subspace of observations than the conventional equalizer in unpartitioned observation space under any condition. And also, we apply this idea to the CDMA system and analyze the BER performance.

  • PDF

Study on UxNB Network Deployment Method toward Mobile IAB

  • Keewon Kim;Jonghyun Kim;Kyungmin Park;Tae-Keun Park
    • Journal of the Korea Society of Computer and Information
    • /
    • v.28 no.12
    • /
    • pp.105-114
    • /
    • 2023
  • In this paper, we propose a deployment and operation scheme of UxNB network toward mobile IAB. By operating a UxNB network based on SDN(Software Defined Network), UxNBs are deployed in areas where mobile communication services are desired. After deploying UxNB in the service area, IAB can be set up to perform mobile communication services. For this purpose, this paper first proposes a UxNB Network Controller consisting of a UAV Controller and an SDN Controller, and proposes the necessary functions. Next, we present a scenario in which a UxNB network can be deployed and operated in detail step by step. We also discuss the location of the UxNB network controller, how to deliver control commands from the UAV controller to the UxNB, how to apply IAB for UxNB networks, optimization of UxNB networks, RLF(radio link failure) recovery in UxNB networks, and future research on security in UxNB networks. It is expected that the proposed UxNB Network Controller architecture and UxNB network deployment and operation will enable seamless integration of UxNB networks into Mobile IAB.

Dynamic Model of a Passive Air-Breathing Direct Methanol Fuel Cell (수동급기 직접 메탄올 연료전지의 동적 모델)

  • Ha, Seung-Bum;Chang, Ikw-Hang;Cha, Suk-Won
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2008.05a
    • /
    • pp.33-36
    • /
    • 2008
  • The transient behavior of a passive air breathing direct methanol fuel cell (DMFC) operated on vapor-feeding mode is studied in this paper. It generally takes 30 minutes after starting for the cell response to come to its steady-state and the response is sometimes unstable. A mathematical dynamic one-dimensional model for simulating transient response of the DMFC is presented. In this model a DMFC is decomposed into its subsystems using lumped model and divided into five layers, namely the anodic diffusion layer, the anodic catalyst layer, the proton exchange membrane (PEM), the cathodic catalyst layer and the cathodic diffusion layer. All layers are considered to have finite thickness, and within every one of them a set of differential-algebraic governing equations are given to represent multi-components mass balance, such as methanol, water, oxygen and carbon dioxide, charge balance, the electrochemical reaction and mass transport phenomena. A one-dimensional, isothermal and mass transport model is developed that captures the coupling between water generation and transport, oxygen consumption and natural convection. The single cell is supplied by pure methanol vapor from a methanol reservoir at the anode, and the oxygen is supplied via natural air-breathing at the cathode. The water is not supplied from external source because the cell uses the water created at the cathode using water back diffusion through nafion membrane. As a result of simulation strong effects of water transport were found out. The model analysis provides several conclusions. The performance drop after peak point is caused by insufficiency of water at the anode. The excess water at the cathode makes performance recovery impossible. The undesired crossover of the reactant methanol through the PEM causes overpotential at the cathode and limits the feeding methanol concentration.

  • PDF

Performance Analysis on a Hydrogen Recirculation Ejector for Fuel Cell Vehicle (연료전지 수소재순환 이젝터 성능 해석)

  • NamKoung, Hyuck-Joon;Moon, Jong-Hoon;Jang, Seock-Young;Hong, Chang-Oug;Lee, Kyoung-Hoon
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2008.03b
    • /
    • pp.256-259
    • /
    • 2008
  • Ejector system is a device to transport a low-pressure secondary flow by using a high-pressure primary flow. Ejector system is, in general, composed of a primary nozzle, a mixing section, a casing part for suction of secondary flow and a diffuser. It can induce the secondary flow or affect the secondary chamber pressure by both shear stress and pressure drop which are generated in the primary jet boundary. Ejector system is simple in construction and has no moving parts, so it can not only compress and transport a massive capacity of fluid without trouble, but also has little need for maintenance. Ejectors are widely used in a range of applications such as a turbine-based combined-cycle propulsion system and a high altitude test facility for rocket engine, pressure recovery system, desalination plant and ejector ramjet etc. The primary interest of this study is to set up an applicable model and operating conditions for an ejector in the condition of sonic and subsonic, which can be extended to the hydrogen fuel cell vehicle. Experimental and theoretical investigation on the sonic and subsonic ejectors with a converging-diverging diffuser was carried out. Optimization technique and numerical simulation was adopted for an optimal geometry design and satisfying the required performance at design point of ejector for hydrogen recirculation. Also, some ejectors with a various of nozzle throat and mixing chamber diameter were manufactured precisely and tested for the comparison with the calculation results.

  • PDF

DNA Extraction from Protozoan Oocysts/Cysts in Feces for Diagnostic PCR

  • Hawash, Yousry
    • Parasites, Hosts and Diseases
    • /
    • v.52 no.3
    • /
    • pp.263-271
    • /
    • 2014
  • PCR detection of intestinal protozoa is often restrained by a poor DNA recovery or by inhibitors present in feces. The need for an extraction protocol that can overcome these obstacles is therefore clear. $QIAamp^{(R)}$ DNA Stool Mini Kit (Qiagen) was evaluated for its ability to recover DNA from oocysts/cysts directly from feces. Twenty-five Giardia-positive, 15 Cryptosporidium-positive, 15 Entamoeba histolytica-positive, and 45 protozoa-free samples were processed as control by microscopy and immunoassay tests. DNA extracts were amplified using 3 sets of published primers. Following the manufacturer's protocol, the kit showed sensitivity and specificity of 100% towards Giardia and Entamoeba. However, for Cryptosporidium, the sensitivity and specificity were 60% (9/15) and 100%, respectively. A series of optimization experiments involving various steps of the kit's protocol were conducted using Cryptosporidium-positive samples. The best DNA recoveries were gained by raising the lysis temperature to the boiling point for 10 min and the incubation time of the InhibitEX tablet to 5 min. Also, using a pre-cooled ethanol for nucleic acid precipitation and small elution volume ($50-100{\mu}l$) were valuable. The sensitivity of the amended protocol to Cryptosporidium was raised to 100%. Cryptosporidium DNA was successfully amplified by either the first or the second primer set. When applied on parasite-free feces spiked with variable oocysts/cysts counts, ${\approx}2$ oocysts/cysts were theoretically enough for detection by PCR. To conclude, the Qiagen kit with the amended protocol was proved to be suitable for protozoan DNA extraction directly from feces and support PCR diagnosis.

Preparation and Property of POSS-Based Organic-Inorganic Hybrid Filler and Polyamide Thermoplastic Elastomer (PA-TPE)/POSS Nanocomposite (POSS 기반 유-무기 하이브리드 충전제와 폴리아미드계 TPE로 이루어진 나노복합체의 제조 및 특성)

  • Han, Jae Hee;Kim, Hyung Joong
    • Polymer(Korea)
    • /
    • v.37 no.1
    • /
    • pp.34-40
    • /
    • 2013
  • Commercially available polyamide thermoplastic elastomer (PA-TPE) was blended with hybrid filler which was prepared by means of the reaction between polyhedral oligomeric silsesquioxane (POSS) containing amine group and toluene diisocyanate (TDI)-caprolactam (CL) to explore the effect of blending the hybrid filler with the TPE. The chemical structure of the filler was identified by using FTIR and $^1H$ NMR. The composites, PA-TPE/POSS-(TDI+CL), which were the blends of TDI+CL modified POSS filler and PA-TPE up to 7 wt%, showed better elastic recovery delivered from lower tension setting compared to the PA-TPE and the PA-TPE/octaphenyl POSS blend. In addition the tensile strength and the initial modulus increased with increasing the hybrid filled content. Consequently it was assumed that the POSS-(TDI+CL) filler was a suitable material for enhancing strength and modulus without loss of elastic properties for the original PA-TPE.

Data Recovery of 3D Polygonal Mesh Model (Polygonal Mesh로 표현된 3차원 모델의 에러복원 연구)

  • Kim Dai-yong;Ryu Dae-ha;Park Sung-won;Kim Mi-ja;Jang Euee S.
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2003.11a
    • /
    • pp.23-26
    • /
    • 2003
  • 3차원 Polygonal Mesh는 그래픽스, 에니메이션, 게임에서 3차원 객체에 대한 표현에 사용되고, 이러한 3차원 모델에 대한 IndexedFaceSet 노드에 3차원 정전정보와 연결정보를 압축하는데 MPEG-4 3DMC를 사용한다. 이러한 연결정보는 다각형의 Mesh 형태로 3차원 모델을 구성하는 정보를 갖는데, 이는 Tepological Surgery 라고 하는 방법을 통해서 2차원의 스트립 단위의 데이터로 분해된다. 이러한 3D 데이터는 방송환경과 같은 재전송이 불가능한 네트워크의 환경에서 유무선 네트워크 상에서 채널문제로 인해서 데이터의 손실이 있게 되면, 복호화 된 데이터는 데이터의 손상이 발생하게 된다. 이러한 현상은 3D 모델의 좌표의 연결정보에 손상을 주게 되고, 여기서 복호화 된 데이터는 스트립 단위로 손상이 발생하게 된다. 이러한 현상은 3차원 모델의 좌표의 연결정보에 손상을 주게 된다. 본 논문은 이러한 3차원 정보의 손상을 효과적으로 복원하기 위한 연구에 관한 것이며, Mesh의 면을 이루는 각 꼭지점의 좌표들의 연결 정보가 손실되지 않는 스트립에서는 약간의 차이는 있을 수 있으나, 완벽한 복원을 하였고, 두 개 이상의 스트립이 붙어서 손상된 경우나, 좌표의 연결 정보가 없는 경우에는 조건에 따라 현저히 좋은 격과를 얻을 수 있었다.

  • PDF

Study on the Design and Operation Characteristics of Ejector System (이젝터 시스템의 설계 및 작동 특성에 관한 연구)

  • NamKoung, Hyuck-Joon;Han, Poong-Gyoo;Kim, Young-Soo
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2009.11a
    • /
    • pp.627-630
    • /
    • 2009
  • Ejector system can induce the secondary flow or affect the secondary chamber pressure by both shear stress and pressure drop which are generated in the primary jet boundary. Ejectors are widely used in a range of applications such as a turbine-based combined-cycle propulsion system and a high altitude test facility for rocket engine, pressure recovery system, desalination plant and ejector ramjet etc. The primary interest of this study is to set up an configuration and operating conditions for an ejector in the condition of sonic and subsonic. Experimental and theoretical investigation on the sonic and subsonic ejectors with a converging-diverging diffuser was carried out. Numerical simulation was adopted for an optimal geometry design and satisfying the required performance. Also, some ejectors with a various of nozzle throat and mixing chamber diameter were manufactured precisely and tested for the comparison with the calculation results.

  • PDF