• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1489-1494
• /
• 2014

A hardware-in-the-loop simulation (HILS) method for a wind farm controller using a real time digital simulator (RTDS) is presented, and performance of the wind farm controller is analyzed. A 100 MW wind farm which includes 5 MW wind power generation systems (WPGS) is modeled and analyzed in RSCAD/RTDS. The wind farm controller is implemented by using a computer, which is connected to the RTDS through transmission control protocol/internet protocol (TCP/IP). The HILS results show the active power and power factor of the wind farm, which are controlled by the wind farm controller. The proposed HILS method in this paper can be effectively utilized to validate and test a wind farm controller under the environment in practice without a real wind farm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.191-191
• /
• 2000

Hydraulic servo system is difficult to be made up and each component is very expensive, it takes long for actual system to make and test and it costs a high price. Because of these characteristics of hydraulic servo system, a real time simulator that could describe behavior of real system is highly demanded, without composing real hydraulic system. So, many studies have been (lone on these subjects and many simulators are developed with superiority. Since the nonlinearity of a hydraulic system common simulator have composed of many calculative times byusing DSP(Digital Signal processing) and have made it possible to find the situations of the system in real time, calculating hydraulic simulation and controller separately. In this study, we suggest real-time simulator that could describe real system without ordinary DSP card. This simulator is composed of 80196kc and personal computer. DSP card that has calculated complex numerical equation is supplanted by personal computer and 80196kc generates control signals independently out of the personal computer. In all process, personal computer is synchronized with one-board microprocessor within sampling time in the closed loop system. This makes it possible to be described in hydraulic servo system in real time. And to make a comparison between the result of the real-time simulator and a hydraulic servo system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1878-1884
• /
• 2000

In multibody dynamic analysis, one of the most important problems is to reduce computation times for real time simulation. In this paper, a symbolic computation method is implemented and tested for each dynamic analysis step. Applying symbolic formulations to the vehicle dynamics program AutoDyn7, the effectiveness of the symbolic computation method is verified.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.03a
• /
• pp.27-31
• /
• 1998

The growing usage of multimedia communication applications with specific bandwidth and real-time delivery requirements has created the needs for quality of service(QoS). In response to the growing demand for an integrated services, the Reservation Protocol(RSVP) has been designed to exchange resource reservation among routers in the internet. RSVP protocol provides the quality of service for real-time applications but the network efficiency is reduced because of the limited bandwidth. In order to use network resources efficiently. We compare the resource efficiency of traditional reservation methods with that of the proposed method and evaluate the performance of the internet phone.

• Journal of the military operations research society of Korea
• /
• v.25 no.1
• /
• pp.169-177
• /
• 1999

There is some limitations for ship to gather weather and sea state information. To make up for this weakness, land organizations can gather the wider variety of information, evaluate the navigational safety on a ship, and supply this information to the ship. In this study, the involuntary speed loss are calculated using the real-time information on weather and considering the increase of resistance induced by wave, and the navigational safety in a seaway is evaluated. The used model for computer simulation is Lpp 93m frigate class ship. The feasibility study is made of using simulation results in actual operation.

• Journal of the Korea Society for Simulation
• /
• v.26 no.3
• /
• pp.125-139
• /
• 2017

Recently, interest in improving the quality of EMS(emergency medical services) has been increasing. Much effort is being made to innovate the EMS process. The rapid progress of ICT technology has accelerated the automation or intelligence of EMS processes. This study suggests an emergency room management method based on real-time data considering resource utilization optimization, minimization of human error and enhancement of predictability of medical care. Emergency room operation indices - Emergency care index, Short stay index, Human error inducing index, Waiting patience index - are developed. And emergency room operation rules based on these indices are presented. Simulation was performed on a virtual emergency room to verify the effectiveness of the proposed operating rule. Simulation results showed excellent performance in terms of length of stay.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2190-2194
• /
• 2010

Wind power generation system (WPGS) of Ulleung Island causes frequency and voltage fluctuation due to wind speed variation during night time. Superconducting magnetic energy storage (SMES) system can overcome the fluctuations through the fast response time of energy charging and discharging. The SMES system should be connected to the terminal of the WPGS for frequency stabilization. To demonstrated the effectiveness of SMES system for power quality improvement, Ulleung Island power network was modeled in a real time digital simulator (RTDS). The RTDS-based simulation results of power quality improvement with SMES are investigated and discussed in detail.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.5
• /
• pp.969-975
• /
• 2002

Visual effects are important cues for providing occupants with virtual reality in a vehicle simulator which imitates real driving. The viewpoint of an occupant is sensitively dependent upon the occupant's posture, therefore, the total human body motion must be considered in a graphic simulator. A real-time simulation is required for the dynamic analysis of complex human body motion. This study attempts to apply a neural network to the motion analysis in various driving situations. A full car of medium-sized vehicles was selected and modeled, and then analyzed using ADAMS in such driving conditions as bump-pass and lane-change for acquiring the accelerations of chassis of the vehicle model. A hybrid III 50%ile adult male dummy model was selected and modeled in an ellipsoid model. Multibody system analysis software, MADYMO, was used in the motion analysis of an occupant model in the seated position under the acceleration field of the vehicle model. Acceleration data of the head were collected as inputs to the viewpoint movement. Based on these data, a back-propagation neural network was composed to perform the real-time analysis of occupant motions under specified driving conditions and validated output of the composed neural network with MADYMO result in arbitrary driving scenario.

• 한국경영정보학회:학술대회논문집
• /
• 2008.06a
• /
• pp.957-962
• /
• 2008

We propose a model for the line expansion problem in the AMOLED (Active Matrix Organic Light Emitting Diodes) industry, which now faces market uncertainty: for example, changing customer needs, technological development path, etc. We focus on the optimal investment time and size of the AMOLED production lines. In particular, employed here is the ROV (Real Options Valuation) model to show how to capture the value of line expansion and to determine the optimal investment time. The ROV framework provides a systematic procedure to quantify an expected outcome of a flexible decision which is not possible in the frame of the traditional NPV (Net Present Value) approach. Furthermore, we also use Monte Carlo simulation to measure the uncertainty associated with the line expansion decision; Monte Carlo simulation estimates the volatility of a decision alternative. Lastly, we present a scenario planning to be conducted for what-if analysis of the ROV model.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.41-44
• /
• 2002

The Semiconductor Industrial are developed after 1940. It was called “Rice of Industrial”. It needs great effect in Electronics. It was developed highly in recent several years with semiconductor manufacturing equipments. Semiconductor manufacturing devices are developed “In-line” type in the first stage. But It was non-effective in modem many type process. Because this reason, Cluster type manufacturing equipments are proposed. Cluster have ability of many-type-process and effective-scheduling by circular type process chamber In this paper. we propose a real-time 3D monitoring and simulation of this semiconductor manufacturing equipments. By proposed monitoring method, we have capability real visual maintanance & virtual simulation. This effective visual 3D monitoring could apply another dangerous environment in entire industrial.