• 무역학회지
• /
• 제42권1호
• /
• pp.1-25
• /
• 2017

본 논문에서는 계층화 분석법(AHP)을 활용하여 중국진출 중소·벤처기업의 경영위험요인의 중요도와 우선순위에 대하여 분석하였다. 분석 결과를 보면 제조기업의 경영위험요인의 중요도는 인건비 상승, 치열한 시장경쟁, 인사관리 문제, 재료비 상승 순으로 나타났다. 제조품목별 분석결과를 보면, 전자제품의 경우는 인건비 상승과 더불어 조세정책 변화가 주요요인으로, 화학제품은 환경보호법 강화가 중요한 요인으로, 자동차부품의 경우에는 인건비 상승외에 재료비 상승 또한 주요 위험관리요인으로 분석되었다. 중국 진출시기별로는 1990년대 진출한 기업은 치열한 시장경쟁 및 조세정책 변화가 주요 위험요인으로, 2000년대 진출한 기업의 경우 재료비 상승 등이 인건비 상승 외에 중요한 관리요인으로 분석되었다.

• 한국경영과학회지
• /
• 제38권2호
• /
• pp.95-115
• /
• 2013

In traditional inventory models, purchase prices of raw materials are assumed to be fixed and have no effect on the optimal choice of inventory policies. However, when purchase prices fluctuate continuously over time, inventory costs are heavily affected by purchasing prices. Risk-averse inventory model decides order quantity and ordering time by considering not just purchase prices but also the risk from the discrepancy between estimated prices and realized prices. In this paper, we propose a myopic inventory policy which incorporates price risk into deciding ordering time and quantities. While the existing risk-averse model has no mechanism to reallocate inventories already purchased for a specific future period, the revised one reallocates initial inventories of each period to other future periods so that it can avoid purchasing raw materials at high prices. Experimental results demonstrate that the revised model outperforms the existing one in respect of total cost and variability.

• 대한산업공학회지
• /
• 제12권1호
• /
• pp.31-41
• /
• 1986

In this paper, an integrated production inventory model is developed for two products on a single facility in which the raw materials are fed to the production system as required at the facility. The aim is to determine simultaneously the optimal production schedule for two products and the optimal procurement policies for the raw materials in a way that minimizes the total variable cost of the production system. The production schedule for the more frequently set-up product is formulated by the method of equal or unequal lot sizes. For the model developed, we present a computational scheme of finding the optimal policies and carry out sensitivity analysis through example problem.

• 간호행정학회지
• /
• 제23권2호
• /
• pp.139-150
• /
• 2017

Purpose: The purpose of this study was to identify nursing service costs associated with all health care costs incurred by the institution. Methods: This study was an empirical case study research in which the nursing cost was separated from total medical cost. The nursing cost index was calculated through a cost allocation method after summarizing costs for personnel, raw materials and administration of each department in one public hospital. The 2014 budget plan, published in 'Public Hospitals Alert', was used as data and the data were analyzed using the Microsoft Office EXCEL 2013 program. Results: When comparing total medical costs and nursing costs, the nursing cost were 27.14% of the total medical cost. The nursing cost per nurse per hour was calculated as \29,128 The nursing cost per inpatient per day was calculated as \157,970, and the administration cost per patient was calculated as \133,710. Conclusion: The results of the research present the process of cost allocation of specific cost elements in the hospital and evidence for administrative costs which in the past have been only vaguely formulated. These are the significant implications of this study.

• 한국결정성장학회지
• /
• 제33권6호
• /
• pp.210-215
• /
• 2023

조합 원료의 소성성은 시멘트 제조 기술에서 매우 중요한 요소이며, 각 원료들의 물리적, 화학적 및 광물학적 특성에 의해 좌우된다. 본 연구에서는 국내산 석탄재와 일본산 석탄재를 시멘트 원료로 사용했을 경우, Lafarge 평가 방법과 Polysius 평가 방법을 이용하여 소성성을 비교하였다. 석탄재의 종류와 투입량에 관계없이 석탄재를 사용하였을 경우가 석탄재를 사용하지 않았을 때 보다 소성성이 향상됨을 알 수 있었다. 모든 종류의 석탄재에서 투입량이 증가할수록 소성성이 향상되었으나, 3 %까지 소성성의 향상이 뚜렷하였고 4 % 첨가 시에는 향상 폭이 상대적으로 크지 않았다. 결론적으로 시멘트의 품질이 허용하는 범위 내에서 석탄재의 투입량이 증가할수록 소성성이 향상되며, 따라서 클링커의 소성에 필요한 연료비의 절감도 기대할 수 있다.

• 펄프종이기술
• /
• 제41권4호
• /
• pp.82-90
• /
• 2009

It is very important to utilize effectively fibrous waste paper in terms of cost savings, environmental effects, and governmental policies. The quality of final products and runnability of papermaking process are primarily affected by constitutions of fibrous raw materials. In specific, board grade paper depends directly on compositions of waste paper bales. At present, the raw materials of board grade paper are mainly derived from lots kinds of wastepaper. Some papermaking countries, like EU, USA and Japan have advanced classification and management systems of recycled fiber, but Korea has not yet organized systematically. In this study, evaluation of wastepaper bale compositions and their fiber properties were carried out for effective utilization of fibrous raw materials for board grade paper production. 3 kinds of wastepaper bales were classified to fibrous or non-fibrous materials. In case of fibrous materials, KOCC, kraft sack paper and white duplex board matters were main component in total weight basis, and in case of non-fibrous materials, vinyl, plastic and cloth matters were main component, in turns. 3 representative kinds of waste paper were disintegrated and classified, and then prepared to handsheet for evaluation of recycled fiber property. Consequently, fines and ash content of waste paper, isolated from KOCC and white duplex board were higher than that of kraft sack paper. pH values of all kinds of waste fibers were neutral or weak alkaline.

• Membrane and Water Treatment
• /
• 제10권4호
• /
• pp.259-264
• /
• 2019

Cost effective clay adsorptive microfiltration membranes were synthesized to remove Cr (III) from high polluted water. Raw and calcined bentonite were mixed in order to decrease the shrinkage and also increase the porosity; then, 20 wt% of carbonate was added and the samples, named B (without carbonate) and B-Ca20 (with 20 wt% calcium carbonate) were uniaxially pressed and after sufficient drying, fired at $1100^{\circ}C$ for 3 hours. Then, physical and mechanical properties of the samples, their phase analyses and microstructure and also their ability for Cr(III) removal from high polluted water (including 1000 ppm Cr (III) ions) were studied. Results showed that the addition of calcium carbonate lead the porosity to increase to 33.5% while contrary to organic pore formers like starch, due to the formation of wollastonite, the mechanical strength not only didn't collapse but also improved to 36.77 MPa. Besides, sample B-Ca20, due to the presence of wollastonite and anorthite, could remove 99.97% of Cr (III) ions. Hence, a very economic and cost effective combination of membrane filtration and adsorption technology was achieved for water treatment which made microfiltration membranes act even better than nanofiltration ones without using any adsorptive nano particles.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.313-318
• /
• 2001

The cost of producing ready mixed concrete(remicon) has increased due to the rising cost of raw materials for concrete and transportation caused by the upturn of oil price. In contrast, its orders have also decreased due to the recession of the construction industry. In addition, the cost of delivery has decreased owing to the excessive competition among manufacturing companies, so manufacturing companies began mixing ground granulated blast-furnace slag or fly ash to lower the cost. However, there is no way to determine whether the strength of the concrete using the admixture is satisfied or dissatisfied with design strength at the early age. The purpose of this study is dedicated to early strength estimation of concrete mixed with an admixture, ground granulated blast-furnace slag.

• International Journal of Concrete Structures and Materials
• /
• 제2권1호
• /
• pp.49-55
• /
• 2008

The disadvantage of PMM's (polymer-modified mortars) that are currently on the market is the utilization of expensive polymer additives and also the cost of the other components. One of the possibilities how to decrease this price is the effective utilization of waste materials which are very inexpensive in spite of their good properties. The combinations of different degree in polymer adhesiveness and waste secondary raw materials - fly ash - are experimentally verified in the paper. The use of fly ash in adhesive materials for ceramic tiles is limited by unsatisfactory initial adhesiveness to sintered ceramic sherd as a result of a running pozzolanic reaction that lowers the efficiency of polymer additives. On the other hand, the use of adhesive and backfill coating materials for gluing ETICS board insulation materials has brought very good results.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.84-87
• /
• 2008

The sulfur oxides is one of important materials to come about air pollution at thermal plant consuming fossil fuel. The several flue gas desulfurization equipments are installed and operated to decrease sulfur oxides. The flue gas desulfurization of our thermal plant is designed for optimizing flue gas desulfurization technical development and research by Korea Electric Power Research Institute. We operate this desulfurization equipment. Now, our country imports nearly 97 percentage of the energy source and competes with the world for the energy because of the rise of raw materials cost. The fuel cost decrease of power plants is the most important factor of the operation. The fuel used in the experiment is the domestic anthracite from Kangwon Taeback and the bituminous coal from Russia,Taldinsky Mine. This Study is experimental investigations of desulfurization characteristics for domestic anthracite power plant by increasing bituminous coal. We surveyed possible parameters and conducted the performance about desulfurization equipment in Y.D thermal power plant.