• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1556-1571
• /
• 1993

본 연구에서는 소규모 실험장치(6.6kW)를 이용하여 $NO_x$ 저감방법 중에 가장 효율적인 방법이라 알려진 공기 및 연료의 단계적 연소법 (air and fuel staged combustion)을 이용하여, Fuel-N을 함유하고 있는 연료의 $NO_x$ 의 배출특성을 규명함 은 물론 최적 저 $NO_x$ 연소기술 향상방안을 제시하고자 한다.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.3146-3152
• /
• 2014

본고는 경기지역 IT산업의 하도급거래에 대한 설문조사를 이용해 위탁기업(납품대상업체)과 수탁기업(납품업체)을 중심으로 순위로짓 및 회귀분석 기법을 적용하여 하도급거래 지배력 및 집중도 결정요인을 다각도로 분석하였다. 실증분석 결과, 첫째, 제조업 관련 기업일수록, 수출비중이 높을수록, 기업규모가 클수록 하도급 지배력이 큰 것으로 나타났으며, 본고의 주요한 관심변수인 기술집약도의 경우도 하도급 지배력의 크기에 비례하는 것으로 나타났다. 둘째, 수탁업체를 대상으로 한 하도급거래 집중도 분석 결과, 하도급거래 집중도가 높은 기업일수록 기술집약도가 낮은 것으로 나타났다. 셋째, 동일한 분석을 위탁업체에 적용한 결과, 하도급거래 집중도가 높은 기업일수록 기술집약도 또한 높아지는 것으로 나타나 수탁업체의 추정결과와 대조를 이루었다. 전반적인 실증분석 결과는 하도급거래 집중도가 높을수록 수탁기업의 매출액대비 연구개발 투자 비중이 축소되는 등 거래비용이론의 예측을 지지하지 않는 것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2997-3002
• /
• 2007

A manipulator is operated for the motion of mechanical hands or arms by mechanical mechanism. When a cup including liquid inside is shifted by a manipulator, it is important to know how a free surface of the liquid moves. In this study, non-dimensional parameters have been found that affect the rise of the free surface in a cup moving with constant acceleration. The non-dimensional parameters are the dimensionless time, the ratio of inertia effect to vicous effect (Reynolds number), aspect ratio of the liquid inside the cup and acceleration ratio (Froude number). Through this study, the height of the free surface rise in a cup has been predicted. Generally the maximum rise of the free surface is dependent on the Reynolds number and Froude number strongly, but on the aspect ratio weakly. But the influence of the aspect ratio on the maximum rise of the free surface in not negligible in the range 10 < Re < 100.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.850-854
• /
• 2009

Approximate analysis for a building installed with a friction damper is revisited to get insight of its dynamic behavior. Energy balance equation is used to have a closed analytical form solution of dynamic magnification factor (DMF) for the building with combined viscous and friction damping. It is found out that DMF is dependent on friction force ratio and resonance frequency. Linear transfer function from input external force to output building displacement is obtained by simplifying DMF equation. Root mean square of building displacement is derived under earthquake-like random excitation. Finally, design of friction damper is proposed by processing target control ratio, damping ratio factor, and friction force in sequence.

• 대한기계학회논문집B
• /
• 제22권4호
• /
• pp.428-439
• /
• 1998

Fluid flow and heat transfer have been numerically investigated for an oscillating flow in a tube with a regenerator. The regenerator is placed between hot and cold spaces which are heated and cooled at uniform temperature. An oscillating flow is generated by the piston motion at both ends of a tube. The time dependent, two-dimensional Navier-Stokes equations and energy equation are solved by using the finite-volume and moving grid method. The regenerator is adopted as Brinkmann-Forchheimer extended Darcy model. Numerical results are obtained for the flow and temperature fields, and described the effects of the oscillating frequency and amplitude ratio by the piston motion as well as the aspect ratio. The numerical results obtained indicate that the heat transfer between the tube wall and oscillating flow is increased as the oscillating frequency, amplitude ratio and the aspect ratio are increased.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권1호
• /
• pp.93-100
• /
• 2000

The purpose of this study is to investigate the shear behavior of reinforced concrete beams according to small shear span-depth ratio between a/d=1.5, 2.8, 3.6. In general, shear strength of reinforced concrete beams is dependent on the compressive strength of concrete the longitudinal steel ratio, the shear span-depth ratio and shear reinforcement. The static test was carried out to measure the ultimate load, the initial load of flexural and diagonal cracking, crack patterns, fracture modes. The load versus strain and load versus deflection relations were obtained from the static test. The test results on shear strength were compared with results obtained by the formulas of ACI code 318-95. The shear strength of reinforced concrete beams exceeded those predicted following present ACI code 318-95(11-6).

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.178-185
• /
• 1999

In tool condition monitoring systems, parameters should be set to a certain threshold. In many cases, however, the threshold is dependent on cutting conditions, especially the radial immersion ratio. In this presented is a method of on-line estimation of the radial immersion ratio in face milling. When a tooth finishes sweeping, a sudden drop of cutting force occurs. The force drop is equal to the cutting force that acting on a tooth at the swept angle of cut and can be acquired from cutting force signals in feed and cross-feed directions. Average cutting force per tooth period can also be calculated from cutting force signals in two directions. The ratio to cutting forces in two directions acting on a tooth at a certain swept angle of cut and the ratio of average cutting forces in two directions per tooth period are functions of the swept angle of cut and the ratio of radial to tangential cutting forces. Using these parameters, the radial immersion ratio is estimated. Various experiments are performed to verify the proposed method. The results show that the radial immersion ratio can be estimated by this method regardless of other cutting conditions.

• 한국안전학회지
• /
• 제33권4호
• /
• pp.72-77
• /
• 2018

There are various approaches to prevent industrial accidents, of which the focus on human factors is behavior based safety(BBS). The BBS provides positive feedback on safety behavior and corrective feedback on unsafe behavior. Determining the feedback ratio of positive and correct feedback is an important issue in BBS. The purpose of this study was to examine the effects of positive and corrective feedback ratio on safety performance and feedback acceptance. The participants of this study were sixty undergraduate and graduate students at C University in Seoul, Korea. Participants were asked to work on a simulated welding task. The independent variable of was different positive vs. corrective feedback ratio (1:1 and 1:4). The dependent variables were the amount and the number of correctly completed work tasks, compliance rate of safety behavior, and feedback acceptance. The experimental design of this study was 2 x 2 mixed design. The results showed that feedback, regardless of the ratio, increased both correctly completed work tasks and the compliance rate of safety behavior, while 1:1 positive vs. corrective feedback ratio was more effective than 1:4 ratio. In addition, 1:1 ratio produced higher level of feedback acceptance compared to 1:4 ratio.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.102-104
• /
• 1996

The fabrication and analytical expression for the temperature dependent capacitance characteristics of inverted staggered hydrogenerated amorphous silicon thin film transistors(a-si :H TFT) from 303k to 363k were presented. The results show that the experimental capacitance-voltage characteristics at several temperatures are easily measured. Capacitance increased exponentially by gate voltage increase and decreased by temperature increase. C/C(max) ratio decreased at higher temperature, C/C(min) ratio increased at higher temperature.

• Communications for Statistical Applications and Methods
• /
• 제16권6호
• /
• pp.1023-1029
• /
• 2009

Oh (2009) has proposed a likelihood ratio test for comparing two agreements for dependent observations based on the concept of marginal homogeneity and marginal stochastic ordering. In this paper we consider the comparison of more than two agreement measures. Simple ordering and simple tree ordering among agreement measures are investigated. Some test procedures, including likelihood ratio test, are discussed.