• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1556-1571
• /
• 1993

Nitrogen oxides ($NO_x$) are air pollutants which are generated from the combustion of fossil fuels. Stage combustion is an effective method to reduce $NO_x$ emissions. The effects of $NO_x$ reduction by stage combustion in a pilot scale combustor(6.6kW) have been investigated using propane gas flames laden with NH$_{3}$ as Fuel-N. The results in this study are follows; (1) $NO_x$ emissions are dependent on the reducing environment of fuel-rich zone regardless of total air ratio. The maximum $NO_x$ reduction is at the stoichiometric ratio of 0.8 to 0.9 in the reducing zone. (2) $NO_x$ reduction is maximum when burnout air is injected at the point where the oxygen in reducing zone is almost consumed. (3) $NO_x$ reduction is dependent upon the temperature of reducing zone with best effect above 950.deg. C in the reducing zone. (4) The fuel stage combustion is more effective to reduce $NO_x$ formation in the wide range of stoichiometric ratio than two stage combustion. (5) The results of this study could be utilized mainly in a design strategy for low $NO_x$ emission from the combustion of high fuel-nitrogen in energy sources ratio than as an indication of the absolute levels of $NO_x$ which can be achieved by stage combustion techniques in large scale facilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3146-3152
• /
• 2014

This paper investigates the determinants for the controlling power and the concentration of the subcontracting trade between the downstream producer and the upstream supplier using a survey data for the IT industry in Gyeonggi-Do. The estimation results of the ordered logit and least square analyses are as follows. First, a firm. s controlling power across the downstream producer and the upstream supplier in the subcontracting trade would grow bigger when the company is bigger, more manufacture-oriented, and has higher ratio of export in sales. Second, the analysis for the upstream suppliers indicates that the higher dependent ratio of the subcontracting trade in the sales, the lower the concentration ratio of the R&D in the sales. Lastly, the analysis of the downstream producers indicates that the higher the dependent ratio of the subcontracting trade in the sales, the higher the concentration ratio of the R&D in the sales, which is distinctively contrast with the analysis result of the upstream suppliers. The overall estimation results are, hence, unsupporting to the transaction cost theory which predicts the increase of R&D investments in both downstream producer and upstream supplier.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2997-3002
• /
• 2007

A manipulator is operated for the motion of mechanical hands or arms by mechanical mechanism. When a cup including liquid inside is shifted by a manipulator, it is important to know how a free surface of the liquid moves. In this study, non-dimensional parameters have been found that affect the rise of the free surface in a cup moving with constant acceleration. The non-dimensional parameters are the dimensionless time, the ratio of inertia effect to vicous effect (Reynolds number), aspect ratio of the liquid inside the cup and acceleration ratio (Froude number). Through this study, the height of the free surface rise in a cup has been predicted. Generally the maximum rise of the free surface is dependent on the Reynolds number and Froude number strongly, but on the aspect ratio weakly. But the influence of the aspect ratio on the maximum rise of the free surface in not negligible in the range 10 < Re < 100.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.850-854
• /
• 2009

Approximate analysis for a building installed with a friction damper is revisited to get insight of its dynamic behavior. Energy balance equation is used to have a closed analytical form solution of dynamic magnification factor (DMF) for the building with combined viscous and friction damping. It is found out that DMF is dependent on friction force ratio and resonance frequency. Linear transfer function from input external force to output building displacement is obtained by simplifying DMF equation. Root mean square of building displacement is derived under earthquake-like random excitation. Finally, design of friction damper is proposed by processing target control ratio, damping ratio factor, and friction force in sequence.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.428-439
• /
• 1998

Fluid flow and heat transfer have been numerically investigated for an oscillating flow in a tube with a regenerator. The regenerator is placed between hot and cold spaces which are heated and cooled at uniform temperature. An oscillating flow is generated by the piston motion at both ends of a tube. The time dependent, two-dimensional Navier-Stokes equations and energy equation are solved by using the finite-volume and moving grid method. The regenerator is adopted as Brinkmann-Forchheimer extended Darcy model. Numerical results are obtained for the flow and temperature fields, and described the effects of the oscillating frequency and amplitude ratio by the piston motion as well as the aspect ratio. The numerical results obtained indicate that the heat transfer between the tube wall and oscillating flow is increased as the oscillating frequency, amplitude ratio and the aspect ratio are increased.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.1
• /
• pp.93-100
• /
• 2000

The purpose of this study is to investigate the shear behavior of reinforced concrete beams according to small shear span-depth ratio between a/d=1.5, 2.8, 3.6. In general, shear strength of reinforced concrete beams is dependent on the compressive strength of concrete the longitudinal steel ratio, the shear span-depth ratio and shear reinforcement. The static test was carried out to measure the ultimate load, the initial load of flexural and diagonal cracking, crack patterns, fracture modes. The load versus strain and load versus deflection relations were obtained from the static test. The test results on shear strength were compared with results obtained by the formulas of ACI code 318-95. The shear strength of reinforced concrete beams exceeded those predicted following present ACI code 318-95(11-6).

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.178-185
• /
• 1999

In tool condition monitoring systems, parameters should be set to a certain threshold. In many cases, however, the threshold is dependent on cutting conditions, especially the radial immersion ratio. In this presented is a method of on-line estimation of the radial immersion ratio in face milling. When a tooth finishes sweeping, a sudden drop of cutting force occurs. The force drop is equal to the cutting force that acting on a tooth at the swept angle of cut and can be acquired from cutting force signals in feed and cross-feed directions. Average cutting force per tooth period can also be calculated from cutting force signals in two directions. The ratio to cutting forces in two directions acting on a tooth at a certain swept angle of cut and the ratio of average cutting forces in two directions per tooth period are functions of the swept angle of cut and the ratio of radial to tangential cutting forces. Using these parameters, the radial immersion ratio is estimated. Various experiments are performed to verify the proposed method. The results show that the radial immersion ratio can be estimated by this method regardless of other cutting conditions.

• Journal of the Korean Society of Safety
• /
• v.33 no.4
• /
• pp.72-77
• /
• 2018

There are various approaches to prevent industrial accidents, of which the focus on human factors is behavior based safety(BBS). The BBS provides positive feedback on safety behavior and corrective feedback on unsafe behavior. Determining the feedback ratio of positive and correct feedback is an important issue in BBS. The purpose of this study was to examine the effects of positive and corrective feedback ratio on safety performance and feedback acceptance. The participants of this study were sixty undergraduate and graduate students at C University in Seoul, Korea. Participants were asked to work on a simulated welding task. The independent variable of was different positive vs. corrective feedback ratio (1:1 and 1:4). The dependent variables were the amount and the number of correctly completed work tasks, compliance rate of safety behavior, and feedback acceptance. The experimental design of this study was 2 x 2 mixed design. The results showed that feedback, regardless of the ratio, increased both correctly completed work tasks and the compliance rate of safety behavior, while 1:1 positive vs. corrective feedback ratio was more effective than 1:4 ratio. In addition, 1:1 ratio produced higher level of feedback acceptance compared to 1:4 ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.102-104
• /
• 1996

The fabrication and analytical expression for the temperature dependent capacitance characteristics of inverted staggered hydrogenerated amorphous silicon thin film transistors(a-si :H TFT) from 303k to 363k were presented. The results show that the experimental capacitance-voltage characteristics at several temperatures are easily measured. Capacitance increased exponentially by gate voltage increase and decreased by temperature increase. C/C(max) ratio decreased at higher temperature, C/C(min) ratio increased at higher temperature.

• Communications for Statistical Applications and Methods
• /
• v.16 no.6
• /
• pp.1023-1029
• /
• 2009

Oh (2009) has proposed a likelihood ratio test for comparing two agreements for dependent observations based on the concept of marginal homogeneity and marginal stochastic ordering. In this paper we consider the comparison of more than two agreement measures. Simple ordering and simple tree ordering among agreement measures are investigated. Some test procedures, including likelihood ratio test, are discussed.