• 대한치과교정학회지
• /
• 제45권4호
• /
• pp.198-208
• /
• 2015

Objective: To quantify, for each activation, the effect of preactivations of differing distribution and intensity on the neutral position of T-loops (7-mm height), specifically the horizontal force, moment to force (M/F) ratio, and load to deflection ratio. Methods: A total 100 loops measuring $0.017{\times}0.025$ inches in cross-section were divided into two groups (n = 50 each) according to composition, either stainless steel or beta-titanium. The two groups were further divided into five subgroups, 10 loops each, corresponding to the five preactivations tested: preactivations with occlusal distribution ($0^{\circ}$, $20^{\circ}$, and $40^{\circ}$), gingival distribution ($20^{\circ}$), and occlusal-gingival distribution ($40^{\circ}$). The loops were subjected to a total activation of 6-mm with 0.5-mm iterations. Statistical analysis was performed using comprised ANOVA and Bonferoni multiple comparison tests, with a significance level of 5%. Results: The location and intensity of preactivation influenced the force intensity. For the M/F ratio, the highest value achieved without preactivation was lower than the height of the loop. Without preactivation, the M/F ratio increased with activation, while the opposite effect was observed with preactivation. The increase in the M/F ratio was greater when the preactivation distribution was partially or fully gingival. Conclusions: Depending on the preactivation distribution, displacement of uprights is higher or lower than the activation, which is a factor to consider in clinical practice.

• Journal of the Korean Data and Information Science Society
• /
• 제23권1호
• /
• pp.89-98
• /
• 2012

이 논문에서는 두 개의 Maxwell분포의 모수들의 동질성을 모수비에 근거하여 검정하는 근사통계량을 제안한다. Maxwell분포의 모수비에 대한 추정량이 복잡하여 정확한 분포를 유도하기는 매우 어렵다. 이러한 문제를 해결하기 위한 하나의 대안으로 표준정규분포로 근사적으로 수렴하는 통계량을 고려해야 한다. 이 논문에서 제안된 통계량은 표준정규분포로 수렴하며, 표본의 수가 작은 경우에도 사용할 수 있다. 특히, 본 논문에서는 부호화 로그 우도비 통계량과 수정된 부호화 로그 우도비 통계량을 개발한다. 일반적으로, 수정된 부호화 로그 우도비 통계량은 로그 우도비 통계량에 비해 표준정규분포로 수렴하는 속도가 매우 빠르다. 부호화 로그 우도비 통계량은 작은 표본으로도 표준정규분포로 매우 빨리 수렴한다. 제안된 통계량들의 성질들을 모의실험을 통하여 알아보고, 제안된 통계량을 예제를 통하여 연구한다.

• Composites Research
• /
• 제31권6호
• /
• pp.429-434
• /
• 2018

본 연구에서는 구조물에 부착된 분포형 광섬유 센서의 변형률을 정밀하게 분석하기 위해 위치에 따른 변형률의 변화를 고려하여 광섬유 센서의 변형률 전달률을 분석하였다. 표면에 부착된 코팅된 광섬유 센서의 모델로부터 해석적으로 광섬유 센서의 변형률 전달률을 유도하였으며, 유도된 변형률 전달률은 유한요소해석을 통해 수치적으로 해석한 결과와 비교 검증하였다. 주 구조물의 변형률이 동일한 파장을 가지며 변하는 경우 센서의 변형률 전달률은 위치에 따라 동일한 값을 보였으며, 따라서 변형률 분포의 형상은 왜곡되지 않는다. 하지만 위치에 따라 변형률 파장이 변하면 변형률의 전달률이 위치에 따라 달라져 변형률 분포의 형상이 왜곡될 수 있음을 확인하였다. 본 연구를 통해 얻어진 파장에 따른 변형률 전달률은 분포형 광섬유 센서로부터 주 구조물의 변형률 분포를 정밀하게 추정하는데 유용하게 사용될 것으로 기대된다.

• 한국환경보건학회지
• /
• 제17권2호
• /
• pp.127-139
• /
• 1991

Four group(Control I II, Treatment I II ) of Rats, each consisting of 10 rats, were studied Methylmercury Chloride MMc was orally given to Sprague-Dawley male at does of 10mg/kg (5 mg/kg $\cdot$ day), 10mg/kg after two weeks. This study was designed to investigate the distribution, the difference and the ratio of organic mercury, total mercury, zinc and copper in tissue, in each others group. The result were as follows: 1. There was no significantly difference in the body weight between two groups( p > 0.05). 2. There was significantly difference in the distribution of zinc concentration in liver, kidndey, blood, spleen between control I and treatment I, and in blood, spleen between control II and treatment II (P < 0.05). 3. There was significantly difference in the distribution of copper concentration in kidney, blood between control I and treatment I, and in spleen brain between control II and treatment II. 4. The ratio of zinc concentration in treatment/control was high at spleen. 5. The ratio of methylmercury/totalmercury was high at spleen.

• 환경위생공학
• /
• 제24권3호
• /
• pp.55-61
• /
• 2009

Fe-V is used as raw material of vanadium in the steel making process. The purpose of this study, Fe-V is to replace the $VO_{4}$. So the distribution behavior of vanadium in $VO_{4}$ of the steel investigated. The distribution ratio of the vanadium where potential of the free oxygen ion will increase in slag decreased. When CaO and MgO content which is a basic oxide from CaO-$SiO_2$-FetO-MgOsatd. slag increases, S distribution ratio increases. CaO-$SiO_2$-FetO-MgOsatd. slag better than CaO-$SiO_2$-$Al_2O_3$-MgO slag is the recovery of vanadum and desulfurization.

• Journal of the Korean Data and Information Science Society
• /
• 제28권2호
• /
• pp.443-449
• /
• 2017

Estimation of population proportion like the distribution rate of LED TV and the prevalence of a disease are often estimated based on survey sample data. Population proportion is generally considered as a special form of population mean. In complex sampling like stratified multistage sampling with unequal probability sampling, the denominator of mean may be random variable and it is estimated like ratio estimator. In this research, we examined the estimation of distribution rate based on stratified multistage sampling, and determined some numerical outcomes using stratified random sample data with about 25% of missing observations. In the data used for this research, the survey weight was determined by deterministic way. So, the weights are not random variable, and the population distribution rate and its variance estimator can be estimated like population mean estimation. When the weights are not random variable, if one estimates the variance of proportion estimator using ratio method, then the variances may be inflated. Therefore, in estimating variance for population proportion, we need to examine the structure of data and survey design before making any decision for estimation methods.

• 대한화학회지
• /
• 제13권3호
• /
• pp.199-204
• /
• 1969

4f 및 5f 系列 元素의 溶媒抽出에 있어서 分配速度를 測定해 본 結果 4f 系列의 前半部와 後半部 間에 明白한 差異를 볼 수 있었다. 三價의 Am 및 Cm은 4f 系列의 前半部와 類似함을 알았다. 또한 分配率과 抽出溫度와의 關係를 檢討해 본 結果 抽出系에 따라 獨特한 增加 또는 減少傾向이 나타났으며 또한 Chelate 抽出系에 있어서는 原子番號 存在性이 있음을 알았다

• 한국연소학회지
• /
• 제12권3호
• /
• pp.24-32
• /
• 2007

A theoretical model was developed for rotary kiln and computational study was conducted to find the effect of feeding characteristics. One dimensional model with the variations of heating distribution, length of heating zone, excess air ratio and revolution was considered. The comparison of parallel-flow rotary kiln with that of counter-flow was conducted. For parallel-flow type, it is found that the variation of temperature of solid is not great for the zone that is following flame-heating zone. This zone is good to take the special treatment because thermal deviation is small and contacting time is enough for another treatment. Increase of excess air ratio have the effect of decreasing solid temperature. But this effect of decreasing solid temperature goes small for the great excess air ratio. The heating is efficient for the flame which has the maximum heating at the central region of the full length.

• 한국농공학회지
• /
• 제44권6호
• /
• pp.49-60
• /
• 2002

This study was conducted to estimate the design flood by the determination of best fitting order of LH-moments of the annual maximum series at six and nine watersheds in Korea and Australia, respectively. Adequacy for flood flow data was confirmed by the tests of independence, homogeneity, and outliers. Gumbel (GUM), Generalized Extreme Value (GEV), Generalized Pareto (GPA), and Generalized Logistic (GLO) distributions were applied to get the best fitting frequency distribution for flood flow data. Theoretical bases of L, L1, L2, L3 and L4-moments were derived to estimate the parameters of 4 distributions. L, L1, L2, L3 and L4-moment ratio diagrams (LH-moments ratio diagram) were developed in this study. GEV distribution for the flood flow data of the applied watersheds was confirmed as the best one among others by the LH-moments ratio diagram and Kolmogorov-Smirnov test. Best fitting order of LH-moments will be derived by the confidence analysis of estimated design flood in the second report of this study.

• Journal of the Korean Data and Information Science Society
• /
• 제19권4호
• /
• pp.1173-1181
• /
• 2008

In this paper, when the parameter of interest is the shape parameter in Pareto distribution, we develop likelihood based inference for this parameter. Specially, we develop signed log-likelihood ratio statistic and the modified signed log-likelihood ratio statistic for the shape parameter. It is well-known that as sample size grows, the modified signed log-likelihood ratio statistic converges to standard normal distribution faster than the signed log-likelihood ratio statistic. But the computation of the modified signed log-likelihood statistic is hard or even impossible when the sufficient statistics and the ancillary statistics are not clear. In this case, one can consider an approximation to the modified signed log-likelihood statistic. Specially, when the parameter of interest is informationally orthogonal to the nuisance parameters, we propose the approximate modified signed log-likelihood statistic. Through simulation, we investigate the performances of the proposed statistics with the signed log-likelihood statistic.