• 대한공업교육학회지
• /
• 제45권1호
• /
• pp.84-102
• /
• 2020

During the period of rapid industrial growth, specialized high schools were important vocational education institutions trained specialists and technicians. But now, specialized high schools turned into high schools where the low-ranking students who were pushed out of the competition for admission due to a decline in the education population, changes mostly in labor demand in the labor market, and discrimination against skilled workers. In order to solve this problem, the middle school 3rd grade teachers in charge of the middle school can provide early career guidance, so that they can decide to go to the specialized high school according to their aptitude and talent rather than their grades. The purpose of this study is to investigate the relationship between general characteristics and perception of middle school 3rd grade teachers, and the rate of decision to enter specialized high school. In 2018, The middle school 3rd grade teachers in charge in Daejeon metropolitan city were selected. The results of this study were as follows: When 3rd grade teachers in charge are the male teachers 21.01%(M=.2101) of their students go to specialized high schools. When they are teachers who have not graduated from college of education(M=.2110), with doctoral degree(M=0.3064), of their students go to specialized hight schools. Finally, there was a significant positive relationship between perceptions of high school teachers (β1 = .245, p = .000) and high school graduates (β2 = .149, p = .027). The regression equation derived from this is y = -0.56 + 0.037 * β1 + 0.025 * β2 10.1% (R² = 0.101).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제14권1호
• /
• pp.369-377
• /
• 2013

This paper deals with the state of charge(SOC) and life cycle evaluation algorithm for lead-acid battery, which is essential factor of the electric vehicle(EV) and the stabilization of renewable energy in the smart grid. In order to perform the effective operation of the lead-acid battery, SOC and life cycle evaluation algorithm is required. Specific gravity with the change of electrolyte temperature inside battery case should be obtained to evaluate the SOC of lead-acid battery, however it is difficult to measure the electrolyte temperature of sealed type lead-acid battery. To overcome this problem, this paper proposes the equation of thermal transmission to compensate internal temperature of the lead-acid battery. Also, it is difficult to exactly evaluate the life cycle of battery, depending on the operation conditions of lead-acid battery such as charging and discharging state, self discharging rate and environmental issue. In order to solve the problem, this paper presents the concept for gravity accumulation of charge and discharge cycle, which is the value converted at $20^{\circ}C$. By using the proposed algorithm, this paper propose the test device based on the Labview software. The simulation results show that it is a practical tool for the maintenance of lead-acid battery in the field of industry.

• Journal of Korean Society of Steel Construction
• /
• 제23권2호
• /
• pp.199-210
• /
• 2011

The cables in cable-stayed bridges are under high stress and are very sensitive to vibration due to their small section areas compared with other members. Therefore, it is reasonable to evaluate the cable impact factor by taking into account the dynamic effect due to moving-vehicle motion. In this study, the cable impact factors were evaluated via moving-vehicle-load analysis, considering the design parameters, i.e., vehicle weight, cable model, road surface roughness, vehicle speed, longitudinal distance between vehicles. For this purpose, two steel composite cable-stayed bridges with 230- and 540-m main spans were selected. The results of the analysis were then compared with those of the influence line method that is currently being used in design practice. The road surface roughness was randomly generated based on ISO 8608, and the convergence of impact factors according to the number of generated road surfaces was evaluated to improve the reliability of the results. A9-d.o.f. tractor-trailer vehicle was used, and the vehicle motion was derived from Lagrange's equation. 3D finite element models for the selected cable-stayed bridges were constructed with truss elements having equivalent moduli for the cables, and with beam elements for the girders and the pylons. The direct integration method was used for the analysis of the bridge-vehicle interaction, and the analysis was conducted iteratively until the displacement error rate of the bridge was within the specified tolerance. It was acknowledged that the influence line method, which cannot consider the dynamic effect due to moving-vehicle motion, could underestimate the impact factors of the end-cables at the side spans, unlike moving-vehicle-load analysis.

• Korean Journal of Medicinal Crop Science
• /
• 제23권4호
• /
• pp.277-283
• /
• 2015

This study was conducted to investigate the selected chemical properties of soils in Saururus chinensis Baill (Chinese lizard's tail) cultivation fields to provide optimal fertilizer application rates and to examine the growth and pharmaco-consitituents of Saururus chinensis Baill as influenced by different amounts of nitrogen (N) fertilizer applications. Based on the results of selected soil chemical properties in 37 cultivation sites of the plant, soil pH, organic matter content, and exchangeable $K^{+}$ concentration were lower than optimal values for cultivating general medicinal crops even though relatively high standard deviations were found in some of the values. At the harvesting stage of the plant aerial parts, soil pH, electrical conductivity (EC), available $P_2O_5$, and exchangeable $Ca^{2+}$, $Mg^{2+}$, $Na^{+}$ decreased as comparing with those before transplanting the plant, whereas the concentration of exchangeable $K^{+}$ increased in the plot treated with N 100% and compost. Fresh weight of the plant aerial parts were highest, 492.5kg/10, in the N 100% treatment plot. Correlation equation between N levels treated (X) and yield of the plant aerial parts (Y) presented as $Y=-2.1609X^2+30.082X+344.12$($R^2= 0.7113$) and the optimal rate of N fertilizer application for the plant was 6.6kg/10a. Carbon concentrations in the plant were not different among the different N levels applied. N and K concentrations in the plant were highest in the plot of N 100% with compost applications, the highest P concentration was in N 100% plot, and the highest Ca and S concentrations were in N 200% plot. Quercetin and quercitrin were highest in the N 150% plot and tannin was highest in N 100% or N 100% with compost application plot.

• Korean journal of food and cookery science
• /
• 제24권5호
• /
• pp.636-644
• /
• 2008

The principal objective of this study was to assess the effects of hydrocolloids(xanthan gum, guar gum, sodium alginate, k-carrageenan, carboxy-methyl cellulose) on the suppression of retrogradation in the bread. The pasting properties of the doughs and the sensory properties were determined in the bread samples, to which xanthan gum, guar gum, sodium alginate, k-carrageenan, and CMC, were added at different ratios(0.2%, 0.6%, 1%). CMC and k-carrageenan with 0.6% level were selected for the further retrogradation studies. Changes in the firmness of the bread samples at room temperature for 15 days were assessed using a texture analyzer, and the type of retrogradation was calculated via the Avrami equation. The thermal properties of the samples were also determined via differential scanning calorimetry (DSC). The addition of hydrocolloids was shown to increase the viscosities of the doughs. Setback and breakdown viscosity were reduced significantly via the addition of CMC(0.6%, 1%), xanthan gum(1%), and k-carrageenan(1%). Sensory hardness was significantly increased when 1% hydrocolloids were added. Our textural analysis showed that the addition of CMC reduced the firmness of the bread, whereas k-carrageenan didn't. However, the retrogradation rate was reduced via the addition of k-carrageenan, as was also demonstrated in the results of our DSC analysis.

• Journal of Distribution Science
• /
• 제12권8호
• /
• pp.43-54
• /
• 2014

Purpose - This study was based on a theoretical consideration of the structural relationship between the support and control of the franchisor and the satisfaction and strategic response (voice, loyalty, exit, neglect) of the franchisee. First, based on the preceding research, this study systematically organized the type of support and control of the franchisor. Second, the study examined the effects of a franchisor's support and control on the expectancy disconfirmation between affiliated franchisees' expectations before a franchise agreement and performance after operating an affiliated store. Third, the study looked into the effects of expectancy disconfirmation relating to a franchisor's support and control on an affiliated franchisees' general satisfaction. Fourth, this study examined the influence of the general satisfaction of a franchisee on affiliated franchisees' response strategies. Research design, data, and methodology - In this study, the population comprised the nation's franchisors, and the sample comprised franchisees conducting business in Seoul and Gyeonggi-do. A self-administered questionnaire was used; the author and examiner explained the study's parameters to the interviewees in advance, to lessen the rate of rejection of the answers and to maintain reliability. The author distributed 350 copies of the questionnaire and collected 327 copies (93.4%). The author removed 54 copies of the sample, as these copies belonged to franchisees that were not registered by the Fair Trade Commission and/or were thought to have either defects or inadequate answers. The author selected an effective sample of 273 copies to enter data and to do the statistical analysis. Results - Both a reliability analysis and a confirmatory factor analysis were performed to measure reliability and validity, and a structural equation model was used to conduct the hypothesis test and investigate the models. The hypothesis was tested (Table 5). The models had a suitable fit, for instance, χ² = 447.663(df = 212, p = .000), χ²/df = 2.112, GFI = .881, AGFI = .858, RMR = .083, RMSEA = .067, NFI = .932, and CFI = .961. The hypothesis test results were as follows. Hypothesis 1 was accepted (C.R. = -2.339, p = .019). Hypothesis 2 was accepted (C.R. = 15.213, p = .000). Hypothesis 3 was accepted (C.R. = -2.631, p = .006). Hypothesis 4 was accepted (C.R. = 16.271, p = .000). Hypothesis 5 was accepted (C.R. = 2.391, p = .017). Hypothesis 6 was accepted (C.R. = 5.777, p = .000). Hypothesis 7 was accepted (C.R. = 17.153, p = .000). Hypothesis 8 was accepted (C.R. = 24.746, p = .000). Hypothesis 9 was accepted (C.R. = -10.150, p = .000). Hypothesis 10 was accepted (C.R. = -12.124, p = .000). Conclusions - The research results showed that expectations for a franchisor's support and control had a significant influence on expectation disconfirmation in a negative way, whereas the performance of support and control were found to have a significant influence on expectation disconfirmation in a positive way. In addition, the expectation disconfirmation of support and control was found to have a significant influence on satisfaction of franchisees in a positive way. Generally, regarding the research on control, control is found to have a negative influence on the satisfaction of franchisees, but this study proves that control is found to affect it in a positive way through conformity.

• Resources Recycling
• /
• 제29권1호
• /
• pp.25-34
• /
• 2020

Electrochemical Quartz Crystal microbalance is a tool that is capable of measuring nanogram-scale mass change on electrode surface. When applying alternating voltage to the quartz crystal with metal electrode formed on both sides, a resonant frequency by inverse piezoelectric effect depends on its thickness. The resonant frequency changes sensitively by mass change on its electrode surface; frequency increase with metal dissolution and decrease with metal deposition on the electrode surface. The relationship between resonant frequency and mass change is shown by Sauerbrey equation so that the mass change during metal dissolution can be measured in real time. Especially, it is effective in the case of reaction mechanism and rate studies accompanied by precipitation, volatilization, compound formation, etc. resulting in difficulties on ex-situ AA or ICP analysis. However, it should be carefully considered during EQCM experiments that temperature, viscosity, and hydraulic pressure of solution, and stress and surface roughness can affect on the resonant frequency. Application of EQCM was shown as a case study on leaching of platinum using aqueous chlorine for obtaining activation energy. A platinum electrode of quartz crystal oscillator with 1000 Å thickness exposed to solution was used as leaching sample. Electrogenerated chlorine as oxidant was purged and its concentration was controlled in hydrochloric acid solution. From the experimental results, platinum dissolution by chlorine is chemical reaction control with activation energy of 83.5 kJ/mol.

• Journal of health informatics and statistics
• /
• 제42권4호
• /
• pp.309-316
• /
• 2017

Objectives: Radon and its progeny pose environmental risks as a carcinogen, especially to the lungs. Investigating factors affecting indoor radon concentrations and models thereof are needed to prevent exposure to radon and to reduce indoor radon concentrations. The purpose of this study was to identify factors affecting indoor radon concentration and to construct a comprehensive model thereof. Methods: Questionnaires were administered to obtain data on residential environments, including building materials and life style. Decision tree and structural equation modeling were applied to predict residences at risk for higher radon concentrations and to develop the comprehensive model. Results: Greenery ratio, impermeable layer ratio, residence at ground level, daily ventilation, long-term heating, crack around the measuring device, and bedroom were significantly shown to be predictive factors of higher indoor radon concentrations. Daily ventilation reduced the probability of homes having indoor radon concentrations ${\geq}200Bq/m^3$ by 11.6%. Meanwhile, a greenery ratio ${\geq}65%$ without daily ventilation increased this probability by 15.3% compared to daily ventilation. The constructed model indicated greenery ratio and ventilation rate directly affecting indoor radon concentrations. Conclusions: Our model highlights the combined influences of geographical properties, groundwater, and lifestyle factors of an individual resident on indoor radon concentrations in Korea.

• Nuclear Engineering and Technology
• /
• 제22권1호
• /
• pp.20-28
• /
• 1990

In this study the migration experiment using packed column with crushed tuff was conducted as a basic research to develop migration model of radionuclides through geologic media. The main emphasis was put on evaluating the validity of migration models. For this, two models were introduced: one is the model which is based on the assumption of instantaneous equilibrium reaction and the other the model based on kinetic process such as intraparticle diffusion. The coefficient of hydrodynamic dispersion in packed column was determined using iodine as nonsorbing tracer. The hydrodynamic dispersion coefficient, D$_{L}$ was shown to be 0.11$\times$10$^{-2}$ $\textrm{cm}^2$/min under the condition of the column porosity of 0.483 and the average water velocity of 0.915$\times$10$^{-2}$ cm/min. The distribution coefficient, Kd of Cs-137 on crushed tuff was 11.3 cc/g at the concentration of 2$\times$10$^{-6}$ M and the temperature of 2$0^{\circ}C$. The breakthrough curve of Cs-137 through packed column was shown to have an asymmetric curve in which long trailing tail appears at the end part of the curve. The results obtained from the comparison of introduced models with experimental data indicated that the mass transfer model with intraparticle diffusion as rate-controlling step simulated the behaviors of Cs-137 migration more adequately, when compared with the bulk reaction model in which the assumption of instantaneous equilibrium reaction was maded. Consequently, the intraparticle diffusion was found to be an important factor in the migration of Cs-137 through packed column.n.

• Journal of Bio-Environment Control
• /
• 제28권3호
• /
• pp.204-211
• /
• 2019

The purpose of this study is to provide basic data for setting environmental design standards for domestic greenhouses. We conducted experiments on thermal environment measurement at two commercial greenhouses where hot water heating system is adopted. We analyzed heat transfer characteristics of hot water heating pipes and heat emission per unit length of heating pipes was presented. The average air temperature in two greenhouses was controlled to $16.3^{\circ}C$ and $14.6^{\circ}C$ during the experiment, respectively. The average water temperature in heating pipes was $52.3^{\circ}C$ and $45.0^{\circ}C$, respectively. Experimental results showed that natural convection heat transfer coefficient of heating pipe surface was in the range of $5.71{\sim}7.49W/m^2^{\circ}C$. When the flow rate in heating pipe was 0.5m/s or more, temperature difference between hot water and pipe surface was not large. Based on this, overall heat transfer coefficient of heating pipe was derived as form of laminar natural convection heat transfer coefficient in the horizontal cylinder. By modifying the equation of overall heat transfer coefficient, a formula for calculating the heat emission per unit length of hot water heating pipe was developed, which uses pipe size and temperature difference between hot water and indoor air as input variables. The results of this study were compared with domestic and foreign data, and it was found to be closest to JGHA data. The data of NAAS, BALLS and ASHRAE were judged to be too large. Therefore, in order to set up environmental design standards for domestic greenhouses, it is necessary to fully examine those data through further experiments.