• Clean Technology
• /
• v.21 no.2
• /
• pp.117-123
• /
• 2015

This inquiry was conducted to develop DeNOx catalyst for LNT. In order to develop appropriate catalysts, four catalysts, which do not use PGM (Platinum Group Metal), were carefully selected : Al/Co/Mn, Al/Co/Ni/Mn, Al/Co/Mn/Ca, Al/Co/Ni mixed metal oxides during preliminary experiments. Also, XRD, EDS, SEM, BET and TPD tests were carried as well to evaluate both physicochemical properties of such four catalysts. As a result of the experiment, four catalysts were composed of spinel-shaped crystals and had more than enough pore volume and size to have oxidation-reduction reaction of NOx gases. Additionally, through TPD test, all four types of catalysts were proved to possibly have an oxidation-reduction acid site and NO oxidation activities similar to commercial catalysts. Based on the results above, if we have further change in the composition components and active ingredients according to the catalysts that were chosen in this investigation, then we are more welcomed to expect to have an enhanced DeNox catalyst for LNT.

• Archives of design research
• /
• v.16 no.4
• /
• pp.313-322
• /
• 2003

The residential and welfare facilities for the elderly are continuously increasing due to change of value on family under situation of aging population increase. And it is predicted that accommodation capacity of facilities for the elderly and its rate those facility takes compared to whole social welfare facilities will be accelerated considering past increase speed. On the other hand, about 60％ of elderly people have low physical and mental level almost dose to handicapped people therefore special environmental concerns helping their independent living are necessary. The purpose of this study is to analyze whether facilities for the elderly are adequate to accommodate their request condition by understanding color among environmental factors is one of most important factor for smooth understanding, communication and psychological remedy effect for thou. For this purpose, importance and effect of color and visual characteristic and reaction to color in elderly environment are researched through documents and visited 10 facilities in Seoul and Kyunggi region to research interior color status. And measuring of color on 5 main spaces of the facilities such as lobby/lounge, corridor, dining room, bedroom, stairway/ramp are done under analysis of its functional and aesthetic level based on Moon ＆ Spencer's color theory.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.481-489
• /
• 2017

The study area,Cheonan Stream, is an urban river that flows through urban areas in close proximity to densely populated areas and multi-use facilities. The natural river improvement project from 2006 to 2015 improved the quality of life of local residents with the improvement of river function, the restoration of the natural ecosystem and the securement of hydrophilic space. A bike way in the constructed waterside space was built focusing on trails. This study suggests improvements appropriate for insufficient bike way function-related regulations. The problems of ramps, river crossing facilities, stairway facilities, safety facilities, signs, road markings, and parking facilities, etc.have arisen in the utilization situation and citizen consciousness survey. As an improvement, it was suggested that 12% or fewer ramps should be improved, a submerged bridge should be installed at 7 places separated by stepping bridges, and signs and road markings according to bike way-related regulations should be installed and bike parking facilities at Cheonan station and Cheonan bus terminal should be expanded. The bike way in the waterfront of ChoenanCheon(river) will increase the accessibility and utilization rate of short-distance transportation with the institutional expansion of bike use facilities and work organizations and the improvement of facilities in accordance with urban rivers and bike-related regulations. Therefore, it is expected that the development of the living space will be beneficial for the citizens due to the elimination of traffic in the city and the activation of bike traffic.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.6
• /
• pp.1610-1619
• /
• 1998

The ABR service class provides feedback based traffic control to transport bursty data traffic efficiently. Feedback based congestion control has first been studied to be applied to unicast connections. Recently. several congestion control algorithms for multicast connections have also been proposed as the number of ABR applications requiring multicast increases. With feedback based congestion control, the effectiveness of a traffic control scheme diminishes as propagation delay increases. Especially for a multicast connection, a remote destination may suffer unfair service compared to a local destination due to the delayed feedback. Amelioration of the disadvantages caused by feedback delay is therefore more important for remote destinations in multicast connections. This paper proposes a new switch behavior to provide effective feedback based mathc control for rentoh destinations. The proposed switches adjust the service rate dynamically in accordance woth the state of the downstream, that is, the congestion of the destinaion is immediately controlled by the nearest apstream switch before the source to ramp down the transmission rate of the connection. The proposed switch has an implementation overhead to have a separate buffer for each VC to adjust the service rate in accordance with a backward Rm cell of each VC. The buffer requirement id also increased at intermediate switches. Simulation results show that the proposed switch reduces the cell loss rate in both the local and the remote destinations and slso amelioratd the between the two destinations.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.51-61
• /
• 2012

Kyong-Eui Railway used to be one of the major cross-country railways connecting Busan and Shineuiju. Being the central axis of logistics and transportation in Korea, it also signifies a symbolic meaning of the people's desire for the unification of divided Korean peninsula. A steam locomotive that had stopped in Jangdan Station was bombed out during the Korean War. The locomotive has been neglected and covered with rust in DMZ over a half century, and now is becoming a historic reminder of divided Korea. The initial design approach was based on the three main perspectives of the relocation plan of the steam locomotive in Jangdan Station which is designated as the registered cultural asset no. 78: historical significance, role of a monumental space, and influence on and from the local culture and tourism. Three design subjects were especially highlighted which would represent the identity of the cultural asset, the stream locomotive. First, a vertical watching deck was installed to provide various view points toward the locomotive while ensuring the security of visitors as well as the cultural asset. Second, the Dokgae bride area has good design potentials being on the railway. However, the site is too narrow. Thus, a new ramp and a stairway were placed responding to the existing topography so that the pedestrian environment could be secured last, to respect the local context where the locomotive was originally located, mulberry trees in the locomotive were transplanted as well. Flowering plants were planted around the display area for better ventilation to minimize the negative impact on the locomotive.

• KDI Journal of Economic Policy
• /
• v.35 no.4
• /
• pp.31-61
• /
• 2013

The purpose of this study is to calculate the economic value of transport demand forecasting risks in the road PPP project. Under the assumption that volatility of the road PPP project value occurs only in regard with uncertainty of traffic volume forecasting, this study calculates the economic value of the traffic forecasting risks in the case of the road PPP project. To that end, forecasted traffic volume is assumed to be a stochastic variable and to follow the Geometric Brownian motion as time passes. In particular, this study attempts to differentiate itself from existing studies that simply use an arbitrary assumption by presenting the application of different traffic volume growth volatility and the rates before and after the ramp-up period. Analysis of the case projects reveals that the risk premium related to traffic volume forecast of the project turns out as 7.39~8.30%, without considering option value-such as minimum revenue guarantee-while the project value volatility caused by transport demand forecasting risks is 17.11%. As the discount rate grows higher, the project value volatility tends to decrease and volatility in project value is always suggested to be larger than that in transport volume influenced by leverage effect due to fixed expenditure. The market value of transport demand forecasting risk-calculated using the project value volatility and risk premium-is analyzed to be between 0.42~0.50, implying that a 1% increase or decrease in the transport amount volatility would lead to a 0.42~0.50% increase or decrease in risk premium of the project.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.65-72
• /
• 2011

When an expressway intersects another expressway, a unique connector needs to be designed between the two consecutive exit ramps. In such a case, it is important to design a connector such that there is enough distance for drivers to find their way safely. A current design manual in Korea prescribes the minimum length of the connector as 240 m. In this research, we have suggested a method for calculating the minimum length of a connector in order to check the feasibility of the currently prescribed length. For this purpose, we have attempted to determine the total perception-reaction time and lane-changing time required by a driver. For determining the driver's perception-reaction time, we have used the driver's decision time in addition to the conventional 2.5 s of perception-reaction time for stopping sight distances. We have considered both the design speed and the average travel speed for the calculation of the length. To evaluate the accuracy of the new method, we have chosen four sites on expressways for which relatively high accident rates were recorded. As a result, we could verify that the current limit (240 m) was sufficient for drivers to be able to change lanes in the given specific geometry. However, the prescribed limit should be revised in case the drivers' decision time is considered to be their perception-reaction time. All new approaches for calculating the ideal length of a connector have been carried out by taking into account the design speed as well as the average travel speed. Owing to the characteristics of the specific geometry for two consecutive exit ramps and the large difference between the design speed and the average travel speed in the objective areas, it is more realistic to use the proposed method by keeping the decision time equal to a driver's perception-reaction time, in order to determine the ideal distance that should be maintained between two consecutive exit ramps.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.17-25
• /
• 2007

Multilevel inkjet printer employs multiple ink droplets with variable dot size and/or different concentrations intended to preserve high fidelity color reproduction and the appearance of continuous tone. A variety of research efforts on multitoning techniques has progressed toward better image quality. However, banding artifacts appear due to the same dot distributions near the printable output levels. This results in discontinuity and visually unpleasing output, especially at the smooth tone transition region. In this paper, to reduce the banding artifacts, a multitoning method to arrange ink distribution by controlling the blending proportion of adjacent output pixels based on an improved threshold scaling function is proposed. Ink distributions across the banding regions are changed according to two factors of the threshold scaling function because these factors handle the blending point of adjacent output pixel. Therefore, 8 observers, subjectively investigated ink distributions around the printable output levels for a set of the improved threshold scaling function. For a threshold scaling function with the specific factor values, we can achieve smoother visual transition. In the experiment, the proposed method showed a reduction of banding artifacts in both u-ay and color image and represented better Performance of color reproduction.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.63-74
• /
• 2008

The design of best efficient production process is common requirements of the production strategy department and the process planning department to maximize the revenue and accomplish target production volumes in the production periods. And they use several general methods for that-line-balancing, removing of the bottle-neck process, facility ramp-up, increasing of the worker's utilization, etc. But, those methods have depended on analytic, static and arithmetic calculations, yet. So, irregular work-waiting time causing the delay time isn't include in extracting production capacity, especially in the line production process. The work-waiting time is changed irregularly along the variation of each machine and very important for calculate real product lead-time and forecasting target production volumes. At this thesis, i'm going to mention the importance of the delay time of conveyor system which can be extracted by discrete-event simulation. And suggest it as a new main variable that must be considered at designing new production system. Then experimented and tested that's effects in the H-company case, conveyor based line production process.

• Journal of the Korean Ceramic Society
• /
• v.49 no.2
• /
• pp.197-203
• /
• 2012

In this study, in order to improve densification of $La_{0.8}Ca_{0.2}Cr_{0.9}Co_{0.1}O_{3-\delta}$ (LCCC), which is known for one of the most proper candidate interconnector materials in the solid oxide fuel cells, $CaCrO_4$ was prepared via solid oxide synthesis route and added to the LCCC with different amount and particle sizes. As the amount of the $CaCrO_4$ increased, porosity of the sintered samples increased, and the pore size was proportional to the particle size of the $CaCrO_4$. This supports the fact that the $CaCrO_4$ phase forms liquid during sintering and permeate into the matrix leaving behind large pores. Then the liquid reacts with the matrix through the solid solution. However, when the samples were sintered with a slow ramp up rates, the porosity decreased. This is thought to be caused by the progressive solid solution of $CaCrO_4$ before the temperature reach to the melting temperature and forms a fluent amount of liquids. The sintering behavior of the LCCC with the addition of $CaCrO_4$ was analyzed through the transient liquid phase sintering on the basis of the microstructure observation and phase identification by x-ray diffraction.