• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.27-37
• /
• 2011

Currently, in the course of introducing rolling stocks, RAMS standard and management by system engineering method apply to rolling stock system. Technical elements and results applied in system introduction phase are just used in acquisition stage, and these are not applied to the standard in railway site. Therefore, it is difficult to apply to standardized technology and quality assurance measure. Due to the establishment of the EU, railway operation system is internationalized and the international railway standards are being discussed in various ways. In addition, standardization is expanded from manufacture to operation and maintenance. It is to provide consistent standard in quality, cost calculation of maintenance technology, maintenance technology and quality assurance in case of international railway safety incidents. Therefore, this study is to find technology, quality and cost management model to be used for choosing railway-operation guidance by considering how technologies & quality have changed in system life cycle, compared with estimated standards, based on the technologies & quality-related result in the process of getting new rolling stocks and management guidance for operation & maintenance process.

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.172-178
• /
• 2012

현행 철도건설기준에서 종곡선과 완화곡선의 경합은 궤도형식에 관계없이 허용하고 있지 않다. 그러나 이러한 기준은 주로 자갈도상궤도의 유지보수의 어려움 때문에 정립된 것이다. 콘크리트궤도는 자갈도상궤도에 비해 유지보수 및 구조안전성 측면에서 장점을 가지고 있다. 따라서 콘크리트 궤도의 경우, 열차의 주행안전성 및 승차감 기준을 만족하는 범위내에서 어느 정도의 선로경합은 완화할 필요성이 있다. 본 연구에서는 종곡선과 완화곡선의 경합여부에 따라 도상종별 열차의 주행안전성 및 승차감, 그리고 궤도작용력을 비교 분석하였으며, 그 결과 경합된 경우도 주행안전, 승차감 및 궤도작용력 기준을 만족하는 것으로 나타났다. 따라서, 비록 자갈도상궤도에서의 선로경합은 많은 유지보수를 필요로 하기 때문에 적용될 수는 없다 할지라도, 콘크리트궤도에서는 유지보수 및 구조적 장점을 고려할 때 종곡선과 완화곡선의 경합이 적용될 수 있을 것으로 판단된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.726-731
• /
• 2004

Bogie is the connection device between carbody and wheel in railway vehicles. It is the core part that exert a important effect on the passenger safety and running safety. Bogie largely consists of bogie frame, suspension, brake, wheel set. Static and Dynamic load have acted on it complexly. When the bogie is designed, finite element method, static load test, fatigue test, running test should be considered. Some bogie frame of high speed railway freight car have the problem. It's end beam was cracked. The crack of the end beam have a bad effect on brake system. In that case, the cars would be in danger of derailment.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(I)
• /
• pp.125-130
• /
• 2003

Korean High Speed Train (KHST) designed to operate at 350km/h has been tested on high speed line in JungBu site since it was developed in 2002. The dynamic performances of railway vehicle are generally stability, safety and ride comfort. The stability performance of KHST was proved that it is stable at 400Km/h through Roller Rig test. The safety and ride comfort need to be predicted the capability of it at 350km/h by the on-line test because KHST is testing at 300km/h up to now. Therefor, in this paper, the safety and ride comfort at 350km/h are predicted the performance using the acceleration results at 300kw/h and these results show that the KHST's dynamic performances are very good. Also, it illustrate the two cases occurred the abnormal vibration of KHST during some on-line tests. The first case is that the variation of vertical acceleration of wheel is analyzed when an abrasion occur on wheel. The second case is that the lateral acceleration of wheel, bogie and body are analyzed when the KHST is unstable at high speed. The occurrences of these special phenomena were due to the some faults of the suspension and braking systems and the faults were improved. In present, it is testing with safety.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제35권12호
• /
• pp.731-740
• /
• 2008

철도 제어 시스템은 대표적인 안전철수 시스템이다. 국제 규격의 컴퓨터 기반의 철도 제어 시스템을 개발하기 위해서 정형 기법을 이용한 요구사항 명세와 검증이 요구된다. 본 논문에서는 정형 기법을 사용하여 요구사항 명세를 작성하는 지침서(guideline)을 개발하고, 컴퓨터 기반의 열차 제어 장치 시스템에 대한 실제 적용 사례를 제시한다. 정형 명세를 위해 상태차트(statechart)와 Z를 사용하고, 정형 명세의 일치성(consistency)과 완전성(completeness)을 검증한다.

• 시스템엔지니어링학술지
• /
• 제19권1호
• /
• pp.29-38
• /
• 2023

Independent Safety Assessment (ISA) is a third-party assessment that is to confirm that the system satisfies the safety requirements in the defined operational context. The process of this assessment often brings about many complex arguments that should be supported by evidence and justification. The communication between arguments and evidence is of the most importance in the context of safety case. This study illustrates how NOR-STA can be used for ISA process, showing the effective structure of safety compliance. The study outlines the steps to breaks down the top goal into many elements such as arguments, sub-goals, justification, context and assumptions. It concludes that the evidence-based safety conformance process utilizing NOR-STA provides a more effective and systematic representation of the independent safety assessment process in conformance cases.

• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.45-50
• /
• 2007

When the walls and floor of a tunnel are excited by a train, a ground vibration energy is transmitted to the surface and to footing of a nearby buildings. Excessive vibration affected to a building structure causes undesirable effect to the structural safety and the perception on residents in building. In this paper, a simple approach is introduced to predict how much vibration, in terms of level and spectra, is transmitted through the ground from the tunnel vibration excitation. A high rise building on a tunnel is selected as an application example of this case study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2202-2208
• /
• 2010

The railway in Korea has been one of important transportation means as the introduction of high-speed train and progress in subway systems. Also, as increases in the speed of train, the guarantee of safety becomes more important, especially, in the fields of railway vehicles and/or facilities. The structural health evaluation for the prevention and diagnosis of the accidents could be conducted using several types of nondestructive evaluation techniques such as ultrasonic developed using infrared thermography or optic fiber sensors. In this paper, the recent progress in structural health evaluation for railway systems has been introduced, and the case studies have been discussed.

• 대한토목학회논문집
• /
• 제36권3호
• /
• pp.587-594
• /
• 2016

도시철도 역사 내에서 발생하는 안전사고는 혼자만의 사고가 아닌 주변인들에게 피해를 주며, 사소하게 보이는 주의 행동을 통해서 충분한 예방이 되기도 한다. 본 논문은 교육의 효과가 극대화 될 수 있는 유아 어린이를 대상으로 도시철도 역사에서 발생하는 안전사고 감소를 위한 행동요령과 안전수칙을 교육할 수 있는 안전교재를 개발하고, 부모 및 교사를 대상으로 설문조사를 실시하여 앞으로의 연구방향에 대한 의견수렴의 목적이 있다. 유아 어린이를 대상으로 시행하고 있는 국내외 안전 매뉴얼에 대한 사례조사 및 비교분석을 진행하며, 교육효과 및 도서 선호도를 기준으로 도시철도를 이용하기 위한 탑승부터 하차까지의 단계별로 안전수칙을 학습하여 안전하게 이용할 수 있도록 동화책 형태로 구성하였다. 개발된 안전교육 교재를 제시하여 부모 및 교사를 대상으로 설문조사를 실시하였으며, 이와 관련된 긍정적인 평가를 확보할 수 있었으며, 추후 발전방안에 대한 의견을 수렴하였다. 본 연구에서 개발된 안전교재는 유아 어린이가 안전하게 도시철도를 이용할 수 있도록 구성된 교재이며, 동화책 형태로 제작됨으로서 이용자의 흥미와 호기심을 자극하고 학습에 도움이 될 수 있을 것으로 기대된다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 춘계학술대회
• /
• pp.233-243
• /
• 2012

HBD(Hot Box Detector) is a device to monitor temperature rises to inappropriate lubricant use or mechanical defects. If a train operates without recognizing such an effect, it might result in bearing overheating due to defects and cause a dangerous situation that it could derail a train owing to the damage of axles. Now for the Gyeongbu HSL at 300km/h, the laws related to monitoring overheated axle bearings are notified in the Railway Safety Law and the Railway Construction Law. But in case of the conventional speed-up lines that a train operates at 180 to 230 km/h, the revised bill of relevant standards is ongoing. Therefore in this paper we present references and reviews investigated in order to use the optimal HBD in the conventional speed-up lines.